Experimental Research on the Anti-Crack Performance and Microscopic Mechanism of the Hybrid Fiber Concrete

2010 ◽  
Vol 168-170 ◽  
pp. 1615-1620 ◽  
Author(s):  
Xiao Fan Liu ◽  
Xiao Zhou Sheng ◽  
Ji Xiang Li ◽  
Yun Xia Lun
Keyword(s):  
Reinforced Concrete ◽  
Experimental Research ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Hybrid Fiber ◽  
Microscopic Mechanism ◽  
Fiber Concrete ◽  
The Relationship

In order to study the effect of fibers to the anti-crack performance of the concrete, sixteen different plat restraint specimens with four different fiber mixing amount (steel fiber is 0, 0.5%, 1%, 1.5%, and polypropylene fiber is 0, 0.1%, 0.2%, 0.3% respectively), are selected to comparison about the influence on the anti-cracking property of the hybrid fiber concrete, single fiber reinforced concrete and plain concrete. Experiments show that fibers increasing the anti-crack performance of the concrete significantly. The relationship between fibers’ content and the crack area is analyzed, and the microscopic mechanism of the anti-crack performance is discussed. Considering the economy and the convenient for construction, the column ratio of 0.5% steel fiber and 0.1% polypropylene fiber is recommended.

Synergistic Effects and Cracking Bending Strength for Steel-Polypropylene Hybrid Fiber Reinforced Concrete

2013 ◽  
Vol 652-654 ◽  
pp. 1237-1241
Author(s):  
Guo Dong Mei ◽  
Xiao Fan Liu ◽  
Ji Xiang Li ◽  
Wen Fu Duan
Keyword(s):  
Reinforced Concrete ◽  
Synergistic Effect ◽  
Bending Strength ◽  
Steel Fiber ◽  
Synergistic Effects ◽  
Polypropylene Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Hybrid Fiber

The cracking bending strength for steel-polypropylene hybrid fiber reinforced concrete (HFRC) had been studied based on experimental test. the inicial cracking strength achieve significant improvement compare to plain concrete, and the highest increase is 16.7%. There is a synergistic effect exist when steel fiber is 1.0% in volume or polypropylene fiber is 0.1% in volume, and the synergistic effect raise to vertex (1.043) when both of those two requirements are fulfilled.

Mechanical Properties of Polypropylene Fiber Concrete after High Temperature

2014 ◽  
Vol 662 ◽  
pp. 24-28 ◽  
Author(s):  
Xi Du ◽  
You Liang Chen ◽  
Yu Chen Li ◽  
Da Xiang Nie ◽  
Ji Huang
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Polypropylene Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Fiber Concrete ◽  
Compressive Strength Of Concrete ◽  
Polypropylene Fiber Reinforced Concrete

With cooling tests on polypropylene fiber reinforced concrete and plain concrete that were initially subjected to different heating temperatures, the change of mechanical properties including mass loss, uniaxial compressive strength and microstructure were analyzed. The results show that the compressive strength of concrete tend to decrease with an increase in temperature. After experiencing high temperatures, the internal fibers of the polypropylene fiber reinforced concrete melted and left a large number of voids in it, thereby deteriorating the mechanical properties of concrete.

scholarly journals Research on compressive strength of hybrid fiber reinforced concrete based on orthogonal design

2021 ◽  
Vol 261 ◽  
pp. 02019
Author(s):  
Tu-Sheng He ◽  
Meng-Qian Xie ◽  
Yang Liu ◽  
San-Yin Zhao ◽  
Zai-Bo Li
Keyword(s):  
Compressive Strength ◽  
Reinforced Concrete ◽  
Prediction Model ◽  
Steel Fiber ◽  
Volume Fraction ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Concrete Compressive Strength ◽  
Hybrid Fiber

The influence of steel fiber and polypropylene fiber mixed on compressive strength of high performance concrete (HPC) was studied. The steel fiber content (0.5%, 1.0%, 1.5%, 2.0%) (volume fraction, the same below), polypropylene fiber content (0.05%, 0.1%, 0.15%, 0.2%) and length (5mm, 6.5mm, 12mm, 18mm) were studied by L16 (45) orthogonal test for 28d ages, the range analysis and variance analysis of the test results are carried out, and the prediction model of compressive strength of hybrid fiber reinforced concrete was established. The results show that: The significant influence factor of concrete compressive strength is the volume fraction of polypropylene fiber, while the length of polypropylene fiber and the volume fraction of steel fiber are not significant; the concrete compressive strength with polypropylene fiber shows negative hybrid effect; The prediction model of compressive strength of hybrid fiber reinforced concrete has high accuracy, and the average relative errors is 2.96%.

Experimental Study on Fracture Properties of Hybrid Fiber Reinforced Concrete

2012 ◽  
Vol 450-451 ◽  
pp. 518-522 ◽  
Author(s):  
Yun Da Shao ◽  
Wen Feng Wang
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Crack Tip Opening Displacement ◽  
Hybrid Fiber ◽  
Opening Displacement ◽  
Critical Crack ◽  
Fracture Properties

Though fracture test on the fifteen specimens with notch of hybrid fiber reinforced concrete with the size of 100mm×100mm×400mm, this paper explores the hybrid effect between steel fiber and polypropylene fiber and impact on the fracture properties, such as critical effective crack length, critical crack tip opening displacement, effective stress intensity factors and fracture energy. The test results indicate that the addition of fiber is helpful to improve the fracture properties of concrete. Synergistic effect of two kinds of fibers is good, the steel fiber with high elastic module can restrain the cracking of concrete when the crack displacement is small, polypropylene macro-fiber with high ductility is more beneficial to increase the fracture properties of concrete than steel fiber when the crack displacement is big. The best fiber compounding can be gotten when the volume fractions of steel fiber and polypropylene fiber is respectively 0.5％and 1.0％in this experiment.

Experimental Study on Fiber Reinforced Concrete

2008 ◽  
Vol 400-402 ◽  
pp. 391-394
Author(s):  
Ming Hui Wei ◽  
Yi Ping Liu ◽  
Li Qun Tang ◽  
Xiao Qing Huang
Keyword(s):  
Reinforced Concrete ◽  
Cost Estimation ◽  
Steel Fiber ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Polymer Fiber ◽  
Fiber Reinforced ◽  
Steel Fiber Reinforced Concrete ◽  
Hybrid Fiber ◽  
Polymer Modified Concrete

Flexure behaviors of plain concrete (PC), steel fiber reinforced concrete (SFRC), polymer modified concrete (PMC), steel fiber reinforced and polymer modified concrete (SFRPMC) and hybrid fiber reinforced concrete (HFRC) with steel fiber and polymer fiber are studied in this paper, flexure tests were carried out and flexure strengths of the five different materials with different mixture ratios were measured and compared. Flexure ductility of PC, PMC, SFRC, and SFRPMC were calculated and compared. In addition, considering performance and cost estimation comprehensively, HFRC is recommended, preliminary tests show that HFRC may be one of the potential materials for bridge pavement.

Orthogonal Test of Flexural Toughness for Hybrid Fiber Reinforced Concretes

2011 ◽  
Vol 239-242 ◽  
pp. 2006-2010
Author(s):  
Xiao Fan Liu ◽  
Guo Dong Mei ◽  
Ji Xiang Li ◽  
Yun Xia Lun
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Test Results ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Hybrid Fibers ◽  
Concrete Matrix ◽  
Orthogonal Tests

Orthogonal tests are designed for hybrid fiber reinforced concrete. Bending toughness of hybrid fiber reinforced concrete, with the substrate intensity C30, the quantity of the volume for the steel fiber dosage 0~1.5% and polypropylene fiber dosage 0~0.3%, are studied. The results show that the hybrid fibers significantly improve the toughness of the concrete matrix. When the dosage reaches to a certain number, the affection of fiber toughness is decreased. Based on the test results the best dosage of hybrid fibers which is the steel fiber 1% mixed with 0.1% polypropylene fiber is recommended.

Research on Compact Resistance Performance of Flexible Fiber and Rigid Fiber Reinforced Concrete

2012 ◽  
Vol 430-432 ◽  
pp. 277-280
Author(s):  
Yan Ming Wang ◽  
Wen Wen Yang ◽  
Yong Sun ◽  
Ke Liu
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Impact Resistance ◽  
Plain Concrete ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Flexible Fiber ◽  
Fiber Concrete ◽  
Resistance Performance ◽  
The Impact

The fiber reinforced concrete with flexible fiber and rigid fiber respectively added into C30 plain concrete, curing under standard condition for 28 days, was used for impact resistance performance experiment. The flexible fiber is American Dura fiber and Chinese nylon fiber. The rigid fiber is Chinese steel fiber. The impact resistance property was evaluated by initial cracking times, final cracking times and impact toughness. The result shows that the impact toughness of steel fiber concrete, Dura fiber concrete and nylon fiber concrete is respectively 15.1, 3.4 and 2.7 times of the plain concrete. The fiber reinforced concrete improves the impact resistance property compared with the plain concrete. The impact resistance of rigid steel fiber reinforced concrete is increased greatly.

Flexural Toughness of Hybrid Fiber Reinforced Concrete under Notched Beam Three-Point Bending

2014 ◽  
Vol 906 ◽  
pp. 311-317
Author(s):  
Si Hui Xiong ◽  
Dong Tao Xia ◽  
Xiang Kun Liu
Keyword(s):  
Reinforced Concrete ◽  
Energy Absorption ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Test Method ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Flexural Toughness ◽  
Polypropylene Fiber Reinforced Concrete

In order to focus on hybrid fiber reinforced concrete flexural toughness,mixed 0.7% steel fiber/0.3% modified polypropylene fiber reinforced concrete, mixed 0.89% steel fiber/0.11% Dura fiber reinforced concrete were chosen to perform flexural toughness test. The test method is giving a central point load to the notched beam specimens (H*B*L1:150mm*150mm*550mm, h1*B1:2mm*25mm) with a 0.2 mm/min loading rate. The load we carry out should not stop until the mid span deflection is more than 3mm.Based on calculating the contribution of the fiber to the energy absorption value Dcr when the concrete cracking,the contribution of the fiber to the energy absorption value D1f when mid-span deflection is δ1,the contribution of the fiber to the energy absorption value D2f when mid-span deflection isδ2 and the equivalent flexural tensile strength feq1,feq2,the effect of the way use to hybrid fiber on the flexural toughness of concrete were investigated. The results shows that the hybrid fiber can significantly improve the flexural toughness of concrete, have favorable deformability and the ability to control crack. The result of 0.7% steel fiber/0.3% modified polypropylene fiber reinforced concrete is shown: Dcr=2185 Nmm,D1f=7634.26 Nmm,D2f=2198.67 Nmm, feq1=4.89 MPa,feq2=2.83 MPa, hence it shows the positive enhancement effect of hybrid fiber and flexural toughness increase significantly.

Experimental Study on Resistance of Hybrid Fiber Reinforced Concrete to Freezing and Thawing

2013 ◽  
Vol 438-439 ◽  
pp. 309-313
Author(s):  
Hong Yuan Huo ◽  
Liang Zhang ◽  
Tong Xing
Keyword(s):  
Reinforced Concrete ◽  
Steel Fiber ◽  
Coupling Effect ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Fiber Reinforced ◽  
Mass Content ◽  
Freezing And Thawing ◽  
Hybrid Fiber ◽  
Hybrid Fibers

Experiments were conducted to study the resistance of steel-polypropylene hybrid fiber reinforced concrete (HFRC) to freezing and tharwing. The mix proportions of concrete in strength grade CF40 were designed according to the superposition mix design method, where five mass contents of polypropylene fiber changing in range of 0.3~1.5kg/m3 with 0.3kg/m3 increment while the fraction of steel fiber by volume was constant as 1.0%, and four fractions of steel fiber by volume changing in range of 0.5~2.0% with 0.5% increment while the mass content of polypropylene fiber was kept as 0.9kg/m3. The results show that the steel-polypropylene hybrid fiber can significantly increase the resistance of HFRC to freezing and thawing, the losses of dynamic elasticity modulus and flexural strength of HFRC decrease with the increasing mass content of polypropylene fiber and fraction of steel fiber by volume, there is the coupling effect of enhancing on resistance of HFRC to freezing and thawing by hybrid fibers.

scholarly journals Mechanical properties of steel-polypropylene hybrid fiber reinforced concrete in building structure

2021 ◽  
Vol 30 (2) ◽  
Author(s):  
Tao Zhang ◽  
Deng Pan
Keyword(s):  
Tensile Strength ◽  
Compressive Strength ◽  
Reinforced Concrete ◽  
Performance Optimization ◽  
Steel Fiber ◽  
Polypropylene Fiber ◽  
Fiber Reinforced Concrete ◽  
Building Structure ◽  
Fiber Reinforced ◽  
Hybrid Fiber

This study mainly analyzed the effect of steel fiber (SF) mixed with polypropylene fiber (PF) on the performance optimization of concrete. Firstly, the steel fiber reinforced concrete (SFRC), polypropylene fiber reinforced concrete (PFRC) and steel-polypropylene hybrid fiber reinforced concrete (SP-HFRC) specimens were designed. Then, the slump experiment, compressive strength experiment, and tensile strength experiment were carried out. The results demonstrated that the increase of fibers reduced the slump, and the influence of PF on the slump was the largest, followed by SF and SP; when the content of SF was 1% and the content of PF was 0.1%, the compressive strength and tensile strength of the concrete were 73.16 MPa and 6.33 MPa, which was superior to the concrete mixed with single fiber. The experimental results demonstrate that SP-HFRC has a superiority in mechanical property and can be further promoted and applied in building structure.

Sign in / Sign up

Export Citation Format

Share Document