The Implementation of Statistical Inference to Study the Bending Strength of Sustainable Hybrid Sandwich Panel Composite

2011 ◽  
Vol 250-253 ◽  
pp. 956-961
Author(s):  
Jauhar Fajrin ◽  
Zhu Ge Yan ◽  
Frank Bullen ◽  
Hao Wang

The study reported here involves the evaluation of the ultimate bending stress (bending strength) of hybrid sandwich panels using a simple comparative statistical analysis. Four sets of beam were tested with each set consisting of modified beams (MB) and unmodified beam (UB) samples. A total of 42 beam samples were tested using 3 point bending followed by statistical inference analysis using a t-test. The results show that the introduction of an intermediate layer has a significant effect on increasing the bending strength of the new hybrid sandwich panel composite.

2014 ◽  
Vol 611-612 ◽  
pp. 781-785 ◽  
Author(s):  
Antti Järvenpää ◽  
Janne Lämsä ◽  
Mikko Hietala ◽  
Kari Mäntyjärvi

Sandwich panel structures are increasingly used in applications where the most important demands are the weight saving and long service life. Utilizing sandwich panels, extremely light-weight, stiff and robust structures can be manufactured. In this study, sandwich panels were produced by specially designed cost-effective forming tools. Various kind of test materials were used for corrugated cores and skin plates: conventional low-carbon steel grade EN 10130 and ferritic stainless steel grade 1.4509 with plate thicknesses of 0.6 and 0.75 mm. A common S355 structural steel was used as a reference for bending strength comparison.For measuring the stiffness, MTS tensile and fatigue testing machine was selected to determine the bending resistance of the sandwich panels. The bending force, needed for yielding and fracture, related to the bending length and intensity was compared with the results from bending of the reference plates. Results showed that the bending force of the panels is significantly higher than that of a plate having similar intensity. The best results were obtained with the stainless steel (SS) panel that had 27% higher bending force at the yield point than 5 mm thick S355 plate having 3 times larger intensity. The carbon steel panel was approximately 40% weaker than the SS-panel and both panel types lost strength when loading direction was changed from transverse to 45 degree and further to 90 degree load (longitudinal).


2020 ◽  
Vol 1 (1) ◽  
pp. 54-63
Author(s):  
Effrosyni Kotsaga

Background: Marketing of food supplements in Greece in print media has not been examined and this study is the first attempt to provide a comparative statistical analysis. Methods: Lifestyle magazines that were distributed all over Greece and aimed at women and men were collected in the years 2014 and 2016. Five criteria with their subcriteria were developed and were related to the branding of the food supplements; their quality characteristics; the information given about health concerns; photographs of people who promoted food supplements and to claims of their suitability. Results: It seems that in terms of product branding, women’s magazines were more likely to be targeted. Some quality characteristics such as information about the ingredients of food supplements or information about banned substances were more likely to be seen in women’s magazines in 2016. In 2014 and 2016, not all advertisements provided information about health concerns and among those which informed readers about health concerns, differentiation in target audiences was observed. Photographs that showed people promoting food supplements as well as claims of suitability for various categories of consumers, seem to be gendered in 2014 but this trend was not strong enough in 2016. Conclusion: It can be argued that the marketing of food supplements was aggressive and gendered in 2014 and changed in 2016 with better information on public health but had retained some gendered stereotypes.


2020 ◽  
Author(s):  
Hideya Kawasaki ◽  
Hiromi Suzuki ◽  
Masato Maekawa ◽  
Takahiko Hariyama

BACKGROUND As pathogens such as influenza virus and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) can easily cause pandemics, rapid diagnostic tests are crucial for implementing efficient quarantine measures, providing effective treatments to patients, and preventing or containing a pandemic infection. Here, we developed the immunochromatography-NanoSuit® method, an improved immunochromatography method combined with a conventional scanning electron microscope (SEM), which enables observation of immunocomplexes labeled with a colloidal metal. OBJECTIVE A total of 197 clinical samples from patients suspected to be suffering from influenza were provided by a general hospital at the Hamamatsu University School of Medicine for examination using the Flu kit. METHODS Immunochromatography kit The ImunoAce® Flu kit (NP antigen detection), a human influenza commercial diagnosis kit, was purchased from TAUNS Laboratories, Inc. (Shizuoka, Japan). Au/Pt nanoparticles were utilized to visualize the positive lines. A total of 197 clinical samples from patients suspected to be suffering from influenza were provided by a general hospital at the Hamamatsu University School of Medicine for examination using the Flu kit. After macroscopic diagnosis using the Flu kit, the samples were stored in a biosafety box at room temperature (20-25 °C / 68 - 77 °F). The IgM detection immunochromatography kit against SARS-CoV-2 was obtained from Kurabo Industries, Ltd. (Osaka, Japan). One step rRT-PCR for influenza A rRT-PCR for influenza A was performed as described previously using Flu A universal primers. A Ct within 38.0 was considered as positive according to the CDC protocol. The primer/probe set targeted the human RNase P gene and served as an internal control for human nucleic acid as described previously. SEM image acquisition The immunochromatography kit was covered with a modified NanoSuit® solution based on previously published components (Nisshin EM Co., Ltd., Tokyo, Japan), placed first onto the wide stage of the specimen holder, and then placed in an Lv-SEM (TM4000Plus, Hitachi High-Technologies, Tokyo, Japan). Images were acquired using backscattered electron detectors with 10 or 15 kV at 30 Pa. Particle counting In fields containing fewer than 50 particles/field, the particles were counted manually. Otherwise, ImageJ/Fiji software was used for counting. ImageJ/Fiji uses comprehensive particle analysis algorithms that effectively count various particles. Images were then processed and counting was performed according to the protocol. Diagnosis and statistics The EM diagnosis and criteria for a positive test were defined as follows: particle numbers from 6 fields from the background area and test-line were statistically analyzed using the t-test. If there were more than 5 particles in one visual field and a significant difference (P < 0.01) was indicated by the t-test, the result was considered positive. Statistical analysis using the t-test was performed in Excel software. Statistical analysis of the assay sensitivity and specificity with a 95% confidence interval (95% CI) was performed using the MedCalc statistical website. The approximate line, correlation coefficient, and null hypothesis were calculated with Excel software. RESULTS Our new immunochromatography-NanoSuit® method suppresses cellulose deformity and makes it possible to easily focus and acquire high-resolution images of gold/platinum labeled immunocomplexes of viruses such as influenza A, without the need for conductive treatment as with conventional SEM. Electron microscopy (EM)-based diagnosis of influenza A exhibited 94% clinical sensitivity (29/31) (95% confidence interval [95%CI]: 78.58–99.21%) and 100% clinical specificity (95%CI: 97.80–100%). EM-based diagnosis was significantly more sensitive (71.2%) than macroscopic diagnosis (14.3%), especially in the lower influenza A-RNA copy number group. The detection ability of our method is comparable to that of real-time reverse transcription-polymerase chain reaction. CONCLUSIONS This simple and highly sensitive quantitative analysis method involving immunochromatography can be utilized to diagnose various infections in humans and livestock, including highly infectious diseases such as COVID-19.


2021 ◽  
Vol 13 (4) ◽  
pp. 168781402110094
Author(s):  
Ibrahim Elnasri ◽  
Han Zhao

In this study, we numerically investigate the impact perforation of sandwich panels made of 0.8 mm 2024-T3 aluminum alloy skin sheets and graded polymeric hollow sphere cores with four different gradient profiles. A suitable numerical model was conducted using the LS-DYNA code, calibrated with an inverse perforation test, instrumented with a Hopkinson bar, and validated using experimental data from the literature. Moreover, the effects of quasi-static loading, landing rates, and boundary conditions on the perforation resistance of the studied graded core sandwich panels were discussed. The simulation results showed that the piercing force–displacement response of the graded core sandwich panels is affected by the core density gradient profiles. Besides, the energy absorption capability can be effectively enhanced by modifying the arrangement of the core layers with unclumping boundary conditions in the graded core sandwich panel, which is rather too hard to achieve with clumping boundary conditions.


2013 ◽  
Vol 04 (S 01) ◽  
pp. S31-S34 ◽  
Author(s):  
Shin Yi Ng ◽  
Ki Jinn Chin ◽  
Tong Kiat Kwek

ABSTRACT Background: Leucopenia has been reported after induction of thiopentone barbiturate therapy for refractory intracranial hypertension. However, the incidence and characterisitics are not well described. Aims: We performed a retrospective review to describe the incidence and characteristics of leucopenia after induction of thiopentone barbiturate therapy. Setting and Design: Our centre is a national referral centre for neurotrauma and surgery in a tertiary medical institution.Materials and Methods: We performed a retrospective review of all patients who received thiopentone barbiturate therapy for refractory intracranial hypertension during an 18 month period from January 2004 to June 2005 in our neurosurgical intensive care unit. Statistical Analysis Used: Statistical analysis was performed using SPSS version 15.0. All data are reported as mean ± standard deviation or median (interquartile range). The Chi square test was used to analyze categorical data and student t test done for comparison of means. For paired data, the paired t?test was used.-test was used. Results: Thirty eight (80.9%) out of 47 patients developed a decrease in white blood cell (WBC) count after induction of thiopentone barbiturate coma. The mean decrease in WBC from baseline to the nadir was 6.4 × 10 9 /L (P <lt; 0.001) and occurred 57 (3-147) h after induction. The mean nadir WBC was 8.6 < 3.6 × 10 9 /L. Three (6.4%) patients were leucopenic, with a WBC count of 2.8, 3.1, and 3.6 < 10 9 /L. None of them were neutropenic. We did not find an association between decrease in WBC count and clinical diagnosis of infection. We did not find any association between possible risk factors such as admission GCS, maximum ICP prior to induction of barbiturate coma, APACHE II score, total duration and dose of thiopentone given, and decrease in WBC count. Conclusions: Decrease in WBC count is common, while development of leucopenia is rare after thiopentone barbiturate coma. Regular monitoring of WBC counts is recommended.


2013 ◽  
Vol 135 (6) ◽  
Author(s):  
Zhongchang Qian ◽  
Daoqing Chang ◽  
Bilong Liu ◽  
Ke Liu

An approach on the prediction of sound transmission loss for a finite sandwich panel with honeycomb core is described in the paper. The sandwich panel is treated as orthotropic and the apparent bending stiffness in two principal directions is estimated by means of simple tests on beam elements cut from the sandwich panel. Utilizing orthotropic panel theory, together with the obtained bending stiffness in two directions, the sound transmission loss of simply-supported sandwich panel is predicted by the modal expansion method. Simulation results indicated that dimension, orthotropy, and loss factor may play important roles on sound transmission loss of sandwich panel. The predicted transmission loss is compared with measured data and the agreement is reasonable. This approach may provide an efficient tool to predict the sound transmission loss of finite sandwich panels.


2016 ◽  
Vol 3 (1) ◽  
pp. 105-120
Author(s):  
Annika Mikkel

This paper examines the prose rhythm in Dante’s Latin and Italian prose. The samples of Dante’s Latin books De vulgari eloquentia and De Monarchia and the Italian book Convivio are analysed with the purpose of finding the incidence and patterns of prose rhythm. The method used in this paper is comparative-statistical analysis. The rhythm of classic prose was based on the quantity of syllables, while the medieval Latin prose rhythm was based on word stress and called cursus. Although the use of cursus was more popular in Latin prose, it can also be found elsewhere, including Italian prose. The analysis reveals that rhythmical sentences endings have a role in Dante’s prose and that the cursus appear in his Latin works, as well as in his works in vernacular.


2021 ◽  
Author(s):  
Nivedita Rethnakar

Abstract This paper investigates the mortality statistics of the COVID-19 pandemic from the United States perspective. Using empirical data analysis and statistical inference tools, we bring out several exciting and important aspects of the pandemic, otherwise hidden. Specific patterns seen in demo- graphics such as race/ethnicity and age are discussed both qualitatively and quantitatively. We also study the role played by factors such as population density. Connections between COVID-19 and other respiratory diseases are also covered in detail. The temporal dynamics of the COVID-19 outbreak and the impact of vaccines in controlling the pandemic are also looked at with suf- ficient rigor. It is hoped that statistical inference such as the ones gathered in this paper would be helpful for better scientific understanding, policy prepa- ration and thus adequately preparing, should a similar situation arise in the future.


2018 ◽  
Vol 2 (4) ◽  
pp. 373
Author(s):  
Nita Puspitasari ◽  
Iin Purnamasari ◽  
Henry Januar Saputra

This study aims to determine the effectiveness of the Scrapbook Media through the Model of Student Teams Achievement Division on the Motivation and Learning Outcomes of Students in Class III of SDN Mranggen 2. The design of this study uses True Experimental Designs Pretest-Posttest Control Group Design. To analyze student learning motivation using test analysis data of observation motivation learning . The population in this study were all students of class IIIA and IIIB SD Negeri Mranggen 2. t can be concluded that there is effectiveness of scrapbook media through the Student Teams Achievement Division model on motivation and experimental class learning outcomes better than the control class. From the results of statistical analysis with t-test obtained obtained tcount = 2.869 and ttable = 2.086 with a significance level of 5% and N = 20, so that tcount > ttable (2,896 > 2,086) Ha1 is accepted. And the results of observations of learning motivation with t-test statistical analysis were obtained tcount = 3,787 and ttable = 2,086 with a significance level of 5% and N = 20, so that tcount > ttable (3,787 > 2,086) Ha2 is accepted. It can be concluded that scrapbook media through the Student Teams Achievement Division model is effective on student motivation and learning outcomes.


Sign in / Sign up

Export Citation Format

Share Document