Energy Consumption and Emissions Analysis of Natural Gas Exploitation

2011 ◽  
Vol 335-336 ◽  
pp. 1525-1529
Author(s):  
You Shan Gao ◽  
Ai Hong Wang
Keyword(s):  
Energy Consumption ◽  
Natural Gas ◽  
Greenhouse Gas ◽  
Electric Energy ◽  
Primary Energy ◽  
Heat Energy ◽  
Primary Energy Consumption ◽  
Energy Emission

Abstract. This paper analyzed the primary energy consumption and emission of VOC, CO, NOx, SO2, PM, CO2, CH4, N2O during natural gas (NG) exploitation, it showing that more than 65% of VOC, NOX, SOx, CH4, CO2and greenhouse gas were discharged by electric energy and heat energy consumption during NG exploitation in all technique energy emission. Because of its important in NG exploitation, the consumption of electric energy and heat energy and its emissions produced should be reduced in order to reduce the emissions of NG exploitation.

Performance analysis of a combined cooling, heating, and power system driven by a waste biomass fired Stirling engine

2010 ◽  
Vol 225 (2) ◽  
pp. 420-428 ◽  
Author(s):  
J Harrod ◽  
P J Mago
Keyword(s):  
Energy Consumption ◽  
Natural Gas ◽  
Wood Chip ◽  
Primary Energy ◽  
Stirling Engine ◽  
Primary Energy Consumption ◽  
Operational Cost ◽  
Excess Production ◽  
Prime Movers ◽  
Combined Cooling

Due to the soaring costs and demand of energy in recent years, combined cooling, heating, and power (CCHP) systems have arisen as an alternative to conventional power generation based on their potential to provide reductions in cost, primary energy consumption, and emissions. However, the application of these systems is commonly limited to internal combustion engine prime movers that use natural gas as the primary fuel source. Investigation of more efficient prime movers and renewable fuel applications is an integral part of improving CCHP technology. Therefore, the objective of this study is to analyse the performance of a CCHP system driven by a biomass fired Stirling engine. The study is carried out by considering an hour-by-hour CCHP simulation for a small office building located in Atlanta, Georgia. The hourly thermal and electrical demands for the building were obtained using the EnergyPlus software. Results for burning waste wood chip biomass are compared to results obtained burning natural gas to illustrate the effects of fuel choice and prime mover power output on the overall CCHP system performance. Based on the specified utility rates and including excess production buyback, the results suggest that fuel prices of less than $23/MWh must be maintained for savings in cost compared to the conventional case. In addition, the performance of the CCHP system using the Stirling engine is compared with the conventional system performance. This comparison is based on operational cost and primary energy consumption. When electricity can be sold back to the grid, results indicate that a wood chip fired system yields a potential cost savings of up to 50 per cent and a 20 per cent increase in primary energy consumption as compared with the conventional system. On the other hand, a natural gas fired system is shown to be ineffective for cost and primary energy consumption savings with increases of up to 85 per cent and 24 per cent compared to the conventional case, respectively. The variations in the operational cost and primary energy consumption are also shown to be sensitive to the electricity excess production and buyback rate.

Power System for Beautiful China

2021 ◽  
Vol 144 ◽  
pp. 14-21
Author(s):  
Vladimir P. Polevanov ◽  
Keyword(s):  
Renewable Energy ◽  
Energy Consumption ◽  
Natural Gas ◽  
Power System ◽  
Renewable Energy Sources ◽  
Primary Energy ◽  
Energy Resources ◽  
Energy Sources ◽  
Primary Energy Consumption ◽  
Leading Position

The growth in primary energy consumption in 2019 by 1.3% was provided by renewable energy sources and natural gas, which together provided 75% of the increase. China in the period 2010–2020 held a leading position in the growth of demand for energy resources, but according to forecasts, India will join it in the current decade.

scholarly journals Energy Conservation and Efficiency by Energy Efficient Motor in India

2019 ◽  
Vol 9 (1) ◽  
pp. 3917-3926
Keyword(s):  
Energy Consumption ◽  
Energy Conservation ◽  
Greenhouse Gas ◽  
Energy Efficient ◽  
Energy Demand ◽  
Industrial Sector ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Ghg Emission ◽  
The Government

Electricity demand in India is increasing at a rapid pace because of growth in Economy, urbanization, infrastructure development and the living standard of people. According to the United Nation’s world population prospects (2017), India’s population is 1.34 billion which will go grow further and surpass China by 2025[1]. According to the IMF, the Indian economy is expected to grow by 7.5% in FY19-20 and 7.7% in FY20-21[2]. Increased population and growth in GDP are associated with increased energy demand. India’s primary energy consumption was 754 Mtoe in 2017 and expected to reach 1928 Mtoe in 2040[3]. Major energy demand is from the Industrial sector which was 51% of total primary energy consumption in 2017 and expected to reach 990 Mtoe, by 2040 [3]. Rising energy demand and dependence on coal-based energy generation capacity, leading to the emission of Green House Gases (GHG). Most of India’s Greenhouse gas emissions are from energy sector having 68.7% contribution in overall greenhouse gas emission. Agriculture, Industrial process land-use change and forestry (LUCF), and waste, contributed 6.0%, 3.8% and 1.9% respectively in overall GHG emission in 2014. [4]. Reducing the GHG emission in India is a major challenge in front of the Government as the Government has to maintain sustainable growth with the contribution in mitigating the effect of climate change. Govt. has pledged to Paris Agreement for the reduction in emission intensity of GDP by 33-35% by 2030 below 2005 level [5]. In the reduction of GHG emission, energy efficiency's contribution is estimated at approx. 51% [6]. The industrial sector can contribute most in reducing GHG emission and contributes to nationally determined contribution. Industry consumes 40%-45% of total energy consumption and motor-driven system consumes 70% [7] of total Industrial energy. Most of the energy in Industries are consumed to run the motor for various purposes and consumes a major chunk of energy which can be reduced to a significant level by replacing the standard motor with energy efficient motor. 90% of the motor in Indian industries are IE1 or below IE1 standard [8] and required replacement. By installing the energy efficient motor, the industry can save huge energy, cost and reduce CO2 emission. Observing the opportunity for energy saving by energy efficient motor, this paper aims to analyze how energy efficient motor is capable of reducing energy consumption, and how it can contribute to energy conservation. Methodology adopted in this paper is secondary research, that answers to questions like; why Industry need energy efficient motor, how energy efficient motor can save energy and increases efficiency, cost-benefit analysis of installing energy efficient motor, barriers to the installation of energy efficient motor and solution to those barriers in migration from the standard motor to energy efficient motor in India.

scholarly journals Selection of Favourable Concept of Energy Retrofitting Solution for Social Housing in the Czech Republic Based on Economic Parameters, Greenhouse Gases, and Primary Energy Consumption

2019 ◽  
Vol 11 (22) ◽  
pp. 6482
Author(s):  
Katerina Sojkova ◽  
Martin Volf ◽  
Antonin Lupisek ◽  
Roman Bolliger ◽  
Tomas Vachal
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Residential Buildings ◽  
Residential Building ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Building Stock ◽  
Gas Emissions ◽  
Residential Building Stock

Energy retrofitting of existing building stock has significant potential for the reduction of energy consumption and greenhouse gas emissions. Roughly half of the CO2 emissions from Czech building stock are estimated to be allocated to residential buildings. Approximately one-third of the Czech residential building stock have already been retrofitted, but retrofitting mostly takes place in large cities due to greater income. A favourable concept for the mass retrofitting of residential building stock, affordable even in low-income regions, was of interest. For a reference building, multi-criteria assessment of numerous retrofitting measures was performed. The calculation involved different building elements, materials, solutions, and energy-efficiency levels in combination with various heating systems. The assessment comprised environmental impact, represented by operational and embodied primary energy consumption and greenhouse gas emissions, and investment and operational costs using the annuity method. Analysis resulted in the identification of favourable retrofitting measures and showed that complex building retrofitting is advantageous from both a cost and an environmental point of view. The environmental burden could be decreased by approximately 10–30% even without photovoltaic installation, and costs per year could be decreased by around 40%.

scholarly journals The Impact of Parallel Energy Consumption on the District Heating Networks

2019 ◽  
Vol 23 (1) ◽  
pp. 1-13 ◽  
Author(s):  
Eduard Latosov ◽  
Anna Volkova ◽  
Andres Siirde ◽  
Martin Thalfeldt ◽  
Jarek Kurnitski
Keyword(s):  
Energy Consumption ◽  
Negative Impact ◽  
Electric Energy ◽  
District Heating ◽  
Cost Savings ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Capital Costs ◽  
Electric Energy Consumption ◽  
The Impact

Abstract The aim of this study is to evaluate and compare the impacts of heat recovery ventilation (HRV) and exhaust air heat pump (EAHP)-based solutions used in renovated buildings, which make it possible to reach performance class C in district heating (DH) area CO2 emissions, primary energy consumption and total energy costs for consumers. Evaluation is based on the methodology presented in the previous research paper [1]. Calculation results show that the use of EAHP has a negative impact on DH sustainability (heat losses in the DH network, DH heat price, reduced consumption of DH heat) and CO2 emissions related to energy delivery (heat and electricity) to consumers in the DH area. Positive aspects of the EAHP use include the fact that almost the same primary energy consumption level can be achieved with lesser (up to 7 %) annual costs (annual capital costs, DH heat costs and electricity costs) and lower initial investments (about 10 %). At the same time, every renovated building with EAHP will experience a negative impact on heat prices. In DH areas where almost all buildings are renovated with EAHP, cost savings are not as evident compared to buildings with HRV in DH areas where the use of parallel consumption solutions (EAHP) is minimized. It is reasonable to promote these renovation packages and solutions that benefit the building’s primary energy reduction, and also do not increase electric energy consumption (additional electric power generators are needed) and do not damage DH networks.

Saving Primary Energy Consumption Through Exergy Analysis of Combine Distillation and Power Plant

2012 ◽  
Vol 9 (2) ◽  
pp. 65
Author(s):  
Alhassan Salami Tijani ◽  
Nazri Mohammed ◽  
Werner Witt
Keyword(s):  
Energy Consumption ◽  
Power Plant ◽  
Heat Pump ◽  
Heat Recovery ◽  
Energy Savings ◽  
Primary Energy ◽  
Heat Pumps ◽  
Saturated Steam ◽  
Distillation Unit ◽  
Primary Energy Consumption

Industrial heat pumps are heat-recovery systems that allow the temperature ofwaste-heat stream to be increased to a higher, more efficient temperature. Consequently, heat pumps can improve energy efficiency in industrial processes as well as energy savings when conventional passive-heat recovery is not possible. In this paper, possible ways of saving energy in the chemical industry are considered, the objective is to reduce the primary energy (such as coal) consumption of power plant. Particularly the thermodynamic analyses ofintegrating backpressure turbine ofa power plant with distillation units have been considered. Some practical examples such as conventional distillation unit and heat pump are used as a means of reducing primary energy consumption with tangible indications of energy savings. The heat pump distillation is operated via electrical power from the power plant. The exergy efficiency ofthe primary fuel is calculated for different operating range ofthe heat pump distillation. This is then compared with a conventional distillation unit that depends on saturated steam from a power plant as the source of energy. The results obtained show that heat pump distillation is an economic way to save energy if the temperaturedifference between the overhead and the bottom is small. Based on the result, the energy saved by the application of a heat pump distillation is improved compared to conventional distillation unit.

scholarly journals Decarbonization of Residential Building Energy Supply: Impact of Cogeneration System Performance on Energy, Environment, and Economics

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2538
Author(s):  
Praveen K. Cheekatamarla
Keyword(s):  
Carbon Dioxide ◽  
Power Generation ◽  
Energy Consumption ◽  
Carbon Footprint ◽  
Residential Buildings ◽  
Building Energy ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Cogeneration System ◽  
The Impact

Electrical and thermal loads of residential buildings present a unique opportunity for onsite power generation, and concomitant thermal energy generation, storage, and utilization, to decrease primary energy consumption and carbon dioxide intensity. This approach also improves resiliency and ability to address peak load burden effectively. Demand response programs and grid-interactive buildings are also essential to meet the energy needs of the 21st century while addressing climate impact. Given the significance of the scale of building energy consumption, this study investigates how cogeneration systems influence the primary energy consumption and carbon footprint in residential buildings. The impact of onsite power generation capacity, its electrical and thermal efficiency, and its cost, on total primary energy consumption, equivalent carbon dioxide emissions, operating expenditure, and, most importantly, thermal and electrical energy balance, is presented. The conditions at which a cogeneration approach loses its advantage as an energy efficient residential resource are identified as a function of electrical grid’s carbon footprint and primary energy efficiency. Compared to a heat pump heating system with a coefficient of performance (COP) of three, a 0.5 kW cogeneration system with 40% electrical efficiency is shown to lose its environmental benefit if the electrical grid’s carbon dioxide intensity falls below 0.4 kg CO2 per kWh electricity.

scholarly journals Assessment Methodology for Efficiency, CO2-Emissions and Primary Energy Consumption for Refrigeration Technologies in the Industry

2018 ◽  
Vol 882 ◽  
pp. 215-220
Author(s):  
Matthias Koppmann ◽  
Raphael Lechner ◽  
Tom Goßner ◽  
Markus Brautsch
Keyword(s):  
Energy Consumption ◽  
Energy Efficient ◽  
Air Conditioning ◽  
Primary Energy ◽  
Primary Energy Consumption ◽  
Assessment Methodology ◽  
Alternative Technologies ◽  
Overall Efficiency ◽  
Chp System ◽  
The Individual

Process cooling and air conditioning are becoming increasingly important in the industry. Refrigeration is still mostly accomplished with compression chillers, although alternative technologies are available on the market that can be more efficient for specific applications. Within the scope of the project “EffiCool” a technology toolbox is currently being developed, which is intended to assist industrials users in selecting energy efficient and eco-friendly cooling solutions. In order to assess different refrigeration options a consistent methodology was developed. The refrigeration technologies are assessed regarding their efficiency, CO2-emissions and primary energy consumption. For CCHP systems an exergetic allocation method was implemented. Two scenarios with A) a compression chiller and B) an absorption chiller coupled to a natural gas CHP system were calculated exemplarily, showing a greater overall efficiency for the CCHP system, although the individual COP of the chiller is considerably lower.

scholarly journals Energy Consumption and Greenhouse Gas Emissions of Nickel Products

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5664
Author(s):  
Wenjing Wei ◽  
Peter B. Samuelsson ◽  
Anders Tilliander ◽  
Rutger Gyllenram ◽  
Pär G. Jönsson
Keyword(s):  
Energy Consumption ◽  
Greenhouse Gas Emissions ◽  
Greenhouse Gas ◽  
Process Model ◽  
Ghg Emissions ◽  
Primary Energy ◽  
Nickel Metal ◽  
Gas Emissions ◽  
Nickel Smelting ◽  
Ore Grade

The primary energy consumption and greenhouse gas emissions from nickel smelting products have been assessed through case studies using a process model based on mass and energy balance. The required primary energy for producing nickel metal, nickel oxide, ferronickel, and nickel pig iron is 174 GJ/t alloy (174 GJ/t contained Ni), 369 GJ/t alloy (485 GJ/t contained Ni), 110 GJ/t alloy (309 GJ/t contained Ni), and 60 GJ/t alloy (598 GJ/t contained Ni), respectively. Furthermore, the associated GHG emissions are 14 tCO2-eq/t alloy (14 tCO2-eq/t contained Ni), 30 t CO2-eq/t alloy (40 t CO2-eq/t contained Ni), 6 t CO2-eq/t alloy (18 t CO2-eq/t contained Ni), and 7 t CO2-eq/t alloy (69 t CO2-eq/t contained Ni). A possible carbon emission reduction can be observed by comparing ore type, ore grade, and electricity source, as well as allocation strategy. The suggested process model overcomes the limitation of a conventional life cycle assessment study which considers the process as a ‘black box’ and allows for an identification of further possibilities to implement sustainable nickel production.

Sign in / Sign up

Export Citation Format

Share Document