Effects of Rolling Resistance on Shear Behavior and Anisotropy of Granular Matters

2013 ◽  
Vol 631-632 ◽  
pp. 198-204
Author(s):  
Yi Ming Liu ◽  
Hai Jun Mao ◽  
Chun He Yang
Keyword(s):  
Shear Strength ◽  
Discrete Element Method ◽  
Numerical Simulations ◽  
Rolling Resistance ◽  
Discrete Element ◽  
Shear Behavior ◽  
Contact Model ◽  
Biaxial Compression ◽  
Compression Tests ◽  
Dramatic Effect

Standard discrete element method does not take the effect of rolling resistance into account. To overcome this shortcoming, a contact model considering rolling resistance is developed and implemented into PFC2D. Using this contact model, a series of numerical biaxial compression tests are carried out. The results of these numerical simulations show that rolling resistance has remarkable effects on shear strength and shear dilatancy of granular matters, and these trends are agreed with previous studies, which proves that this model works well. Then the effect of rolling resistance on anisotropy of granular matters is studied in this paper. It can be seen that rolling resistance has dramatic effect on the anisotropy of granular matters. The anisotropy of granular matters increases with rolling resistance.

scholarly journals Grain Size Effect on the Mechanical Behavior of Cohesionless Coarse-Grained Soils with the Discrete Element Method

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Renjie Wen ◽  
Cai Tan ◽  
Yong Wu ◽  
Chen Wang
Keyword(s):  
Mechanical Properties ◽  
Grain Size ◽  
Shear Strength ◽  
Size Effect ◽  
Discrete Element Method ◽  
Discrete Element ◽  
Force Chain ◽  
Coarse Grained ◽  
Biaxial Compression ◽  
Grain Sizes

Biaxial compression tests with the same specimen size and different maximum grain sizes were simulated for coarse-grained soils using the discrete element method to study the influence of grain size on the mechanical properties and force chain. The maximum grain sizes were 40, 20, 10, and 5 mm, respectively. The grading with self-similar fractal structure in mass is designed to ensure the same pore structure for soils. The shear strength increased with the increase in maximum grain size. Evident increase in shear strength and significant size effect were observed when the ratio of the specimen diameter to maximum grain size was less than five. The shear dilation of coarse-grained soils increases with the increase in maximum grain size. The contact force distribution was uniform when maximum grain size was small but tends to be uneven with the increase in maximum grain size, thereby causing the increase in shear strength by stable strong force chains. This finding demonstrates size effect on the mechanical properties and force chain of cohesionless coarse-grained soils under the biaxial compression condition.

scholarly journals Discrete element modelling of railway ballast performance considering particle shape and rolling resistance

2020 ◽  
Vol 28 (4) ◽  
pp. 382-407 ◽  
Author(s):  
Yunlong Guo ◽  
Chunfa Zhao ◽  
Valeri Markine ◽  
Can Shi ◽  
Guoqing Jing ◽  
...  
Keyword(s):  
Shear Strength ◽  
Particle Shape ◽  
Large Scale ◽  
Rolling Resistance ◽  
Discrete Element ◽  
Contact Model ◽  
Discrete Element Modelling ◽  
Railway Ballast ◽  
Contact Models ◽  
Strength And Deformation

AbstractTo simulate ballast performance accurately and efficiently, the input in discrete element models should be carefully selected, including the contact model and applied particle shape. To study the effects of the contact model and applied particle shape on the ballast performance (shear strength and deformation), the direct shear test (DST) model and the large-scale process simulation test (LPST) model were developed on the basis of two types of contact models, namely the rolling resistance linear (RRL) model and the linear contact (LC) model. Particle shapes are differentiated by clumps. A clump is a sphere assembly for one ballast particle. The results show that compared with the typical LC model, the RRL method is more efficient and realistic to predict shear strength results of ballast assemblies in DSTs. In addition, the RRL contact model can also provide accurate vertical and lateral ballast deformation under the cyclic loading in LPSTs.

scholarly journals Micromechanical Numerical Modelling on Compressive Failure of Recycled Concrete using Discrete Element Method (DEM)

Materials ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 4329
Author(s):  
Xin Tan ◽  
Zhengbo Hu ◽  
Wengui Li ◽  
Suhua Zhou ◽  
Tenglong Li
Keyword(s):  
Discrete Element Method ◽  
Numerical Simulations ◽  
Discrete Element ◽  
Recycled Concrete ◽  
Recycled Aggregate Concrete ◽  
Image Correlation ◽  
Recycled Aggregate ◽  
Nanoindentation Test ◽  
Aggregate Concrete ◽  
Element Method

This paper investigates the failure processes of recycled aggregate concrete by a model test and numerical simulations. A micromechanical numerical modeling approach to simulate the progressive cracking behavior of the modeled recycled aggregate concrete, considering its actual meso-structures, is established based on the discrete element method (DEM). The determination procedure of contact microparameters is analyzed, and a series of microscopic contact parameters for different components of modeled recycled aggregate concrete (MRAC) is calibrated using nanoindentation test results. The complete stress–strain curves, cracking process, and failure pattern of the numerical model are verified by the experimental results, proving their accuracy and validation. The initiation, growth, interaction, coalescence of microcracks, and subsequent macroscopic failure of the MRAC specimen are captured through DEM numerical simulations and compared with digital image correlation (DIC) results. The typical cracking modes controlled by meso-structures of MRAC are concluded according to numerical observations. A parameter study indicates the dominant influence of the macroscopic mechanical behaviors from the shear strength of the interfacial transition zones (ITZs).

Discrete element method simulations of fracture in concrete under uniaxial compression based on its real internal structure

2017 ◽  
Vol 27 (4) ◽  
pp. 578-607 ◽  
Author(s):  
Jan Suchorzewski ◽  
Jacek Tejchman ◽  
Michał Nitka
Keyword(s):  
Discrete Element Method ◽  
Uniaxial Compression ◽  
Three Dimensional ◽  
Discrete Element ◽  
Cement Matrix ◽  
Two Dimensional ◽  
Compression Tests ◽  
Digital Microscope ◽  
Complex Crack ◽  
Element Method

The paper describes experimental and numerical results of concrete fracture under quasi-static uniaxial compression. Experimental uniaxial compression tests were performed on concrete cubic specimens. Fracture in concrete was detected at the aggregate level by means of three non-destructive methods: three-dimensional X-ray microcomputed tomography, two-dimensional scanning electron microscope and manual two-dimensional digital microscope. The discrete element method was used to directly simulate experiments. Concrete was modelled as a random heterogeneous four-phase material composed of aggregate particles, cement matrix, interfacial transitional zones and macrovoids based on experimental images. Two- and three-dimensional analyses were carried out. In two-dimensional analyses, the real aggregate shape was created by means of clusters of spheres. In three-dimensional calculations, spheres were solely used. A satisfactory agreement between numerical and experimental results was achieved in two-dimensional analyses. The model was capable of accurately predicting complex crack paths and the corresponding stress–strain responses observed in experiments.

Sign in / Sign up

Export Citation Format

Share Document