Secondary Synthesis of Microporous Heteroatoms Y Zeolite and their Hydrodesulfurization Properties for Model Fuel

2015 ◽  
Vol 645-646 ◽  
pp. 1163-1169
Author(s):  
Xin Hong ◽  
Ke Tang
Keyword(s):  
Aqueous Solution ◽  
Inductively Coupled Plasma ◽  
Competitive Adsorption ◽  
X Ray Diffraction ◽  
Y Zeolite ◽  
X Ray ◽  
Inductively Coupled ◽  
Model Fuel ◽  
Infrared Spectrophotometer

Gallium atoms have been introduced into the framework of Y zeolite by treating the zeolite with an aqueous solution of ammonium hexafluoro gallate. The synthesized Y zeolite ([Ga]AlY) was characterized by means of X-Ray Diffraction (XRD), N2 adsorption, Infrared spectrophotometer (IR) and Inductively Coupled Plasma (ICP). The results indicated that Ga has been substituted into the faujasitic framework. Hydrodesulfurization (HDS) of various model fuels containing about 500 μg/g sulfur has been studied over the [Ga]AlY. The activity of the [Ga]AlY catalysts on HDS reaction is highly affected by the temperature and kind of sulfide in model fuels. The conversion for thiophene, benzothiophene (BT) and dibenzothiophene (DBT) in model fuel 1, 2 or 3 was 81.2%, 60.7% and 37.2% respectively. Compared with the model fuel 1, 2 and 3, the conversion of every sulfide in model fuel 4 was much lower which can be due to the competitive adsorption between between the three of them.

The relative stabilities of A- and B-type carbonate substitution in apatites synthesized in aqueous solution

2016 ◽  
Vol 80 (6) ◽  
pp. 977-983 ◽  
Author(s):  
C. H. Yoder ◽  
N. T. Landes ◽  
L. K. Tran ◽  
A. K. Smith ◽  
J. D. Pasteris
Keyword(s):  
Aqueous Solution ◽  
Inductively Coupled Plasma ◽  
Divalent Cations ◽  
Atomic Emission ◽  
Monovalent Cation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Carbonate Substitution ◽  
Type Substitution

AbstractCarbonated calcium apatites doped with a monovalent cation (Li+, Na+, or K+) or a divalent cation (Mg2+ or Zn2+) were prepared in aqueous solution and analysed by powder X-ray diffraction, inductively coupled plasma atomic emission spectroscopy and infrared spectroscopy. The hypothesis that the location of carbonate in the apatite structure, either in place of hydroxide ions in the c-axis channels (A-type substitution) or in place of phosphate (B-type substitution), is affected by the solution energetics of the cation (specifically its enthalpy of hydration) was strengthened by the observation of larger amounts of Atype carbonate in apatites containing the monovalent cations in aqueous solution. It is shown that cations with low negative enthalpies of hydration favour A-type substitution, whereas cations with higher negative hydration enthalpies, such as divalent cations (Mg2+, Zn2+), favour B-type substitution.

The Characteristic Evaluation of Hydroxyapatite Powders Synthesized from CaCO3 Refined from Oyster Shell and H3PO4

2006 ◽  
Vol 118 ◽  
pp. 639-644
Author(s):  
Hye Sung Kim ◽  
Su Chak Ryu
Keyword(s):  
Bone Density ◽  
Inductively Coupled Plasma ◽  
Oyster Shell ◽  
Atomic Emission ◽  
Xrd Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Infra Red ◽  
Ft Ir

Hydroxyapatite (Ca10(PO4)6(OH)2, HAp) powders is synthesized using the mixed powders of CaCO3 refined from oyster shells and phosphoric acid (H3PO4-98%, Daejung) as starting materials. The characteristic evaluation and chemical analysis of the synthesized powders is performed by X-ray diffraction (XRD), Fourier-transformed infra-red spectroscopy (FT-IR), and inductively-coupled plasma atomic emission spectroscopy (ICPAES). XRD analysis of synthetic powder by heat treatment at 1300°C for 2hrs shows only HAp peaks corresponding to stoichiometric HAp. It is confirmed by ICP-AES test that impurities such as Zn, In, Ti, Ba, Cd, Pb, and Mn, is not detected at all, but small amounts of Ti and Be is observed (0.099ppm Ti and 0.002ppm Ba). Variation of bone density is measured by giving medication of HAp powder with drinking water into human body continuously for three month. After the medication, the bone density is higher than the medication before. This means that HAp powder made from this process can be used as improver of bone density.

scholarly journals Characterization of Fly Ash Generated from Matla Power Station in Mpumalanga, South Africa

2012 ◽  
Vol 9 (4) ◽  
pp. 1788-1795 ◽  
Author(s):  
Olushola S. Ayanda ◽  
Olalekan S. Fatoki ◽  
Folahan A. Adekola ◽  
Bhekumusa J. Ximba
Keyword(s):  
Fly Ash ◽  
Inductively Coupled Plasma ◽  
Coal Fly Ash ◽  
Harmful Effect ◽  
Point Of Zero Charge ◽  
X Ray Diffraction ◽  
Power Station ◽  
X Ray ◽  
Inductively Coupled ◽  
Plasma Mass Spectrometry

In this study, fly ash was obtained from Matla power station and the physicochemical properties investigated. The fly ash was characterized by x-ray fluorescence, x-ray diffraction, scanning electron microscopy, and inductively coupled plasma mass spectrometry. Surface area, particle size, ash and carbon contents, pH, and point of zero charge were also measured. The results showed that the fly ash is alkaline and consists mainly of mullite (Al6Si2O13) and quartz (SiO2). Highly toxic metals As, Sb, Cd, Cr, and Pb as well as metals that are essential to health in trace amounts were also present. The storage and disposal of coal fly ash can thus lead to the release of leached metals into soils, surface and ground waters, find way into the ecological systems and then cause harmful effect to man and its environments.

scholarly journals A study concerning the pretreatment of CNTs and its influence on the performance of NIB/CNTs amorphous catalyst

2006 ◽  
Vol 71 (11) ◽  
pp. 1153-1160 ◽  
Author(s):  
Chang Hu-Yuan ◽  
Feng Li ◽  
Li. Hua ◽  
Bin Zhang
Keyword(s):  
Selective Hydrogenation ◽  
Inductively Coupled Plasma ◽  
Acid Treatment ◽  
Chemical Reduction ◽  
X Ray Diffraction ◽  
Chemical Reduction Method ◽  
X Ray ◽  
Inductively Coupled ◽  
Selective Hydrogenation Of Acetylene ◽  
Transmission Electron

As prepared carbon nanotubes were pretreated with nitric acid (CNTs-HNO3) or ammonia (CNTs-NH3). Fourier transform infrared spectroscopy (FTIR) measurements showed that the surface of the nanotubes was functionalized with carboxylic and hydroxyl functional groups after the acid treatment and that basic groups containing nitrogen, such as N-H and C-N, were introduced to the surface of the nanotubes after the ammonia treatment. X-Ray diffraction analysis implied that the nickel residue in the CNTs was effectively removed by acid treatment. However, the nickel residue was only partially eliminated by ammonia pretreatment. NiB amorphous catalysts supported on CNTs-HNO3 and CNTs-NH3 were prepared by the impregnation-chemical reduction method and characterized by transmission electron microscopy (TEM), as well as inductively coupled plasma (ICP) spectroscopy and studied in the selective hydrogenation of acetylene. TEM measurements showed that a high density NiB particles of about 9 nm were homogeneously dispersed on the CNTs-NH3. However, NiB particles (13-23 nm)with amean size of 16 nm were scattered on the CNTs-HNO3.As a result, the activity and selectivity of NiB/CNTs-NH3 were higher than those of NiB/CNTs-HNO3 in the selective hydrogenation of acetylene.

Comparing the Physico-Chemical Characteristics of Formulated and Marketed Yashada Bhasma

2021 ◽  
pp. 6392-6398
Author(s):  
Nitu Bhatnagar ◽  
Avani Pareek
Keyword(s):  
Inductively Coupled Plasma ◽  
Thermo Gravimetric Analysis ◽  
Human Consumption ◽  
Chemical Characteristics ◽  
Gravimetric Analysis ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Physico Chemical ◽  
The Difference

The present study is aimed to observe the difference in the Physico-Chemical characteristics of the marketed and formulated bhasma samples through X-Ray Diffraction analysis (XRD), Dynamic Light Scattering (DLS), Zeta potential, Thermo-Gravimetric analysis (TGA), Scanning Electron Microscopy (SEM) and Energy Dispersive X-Ray analysis (EDAX), apart from organoleptic methods. Inductively Coupled Plasma Mass Spectroscopy (ICPMS) analysis was also done to observe the presence of trace and heavy metals so that the safety of all these samples could be ensured. XRD shows variation in oxide nature of zinc as well crystallite size in all bhasma samples. DLS and SEM results show difference in particle size of marketed bhasma samples as compared to formulated Yashada bhasma. EDAX and ICPMS also confirm the alteration in elemental composition of all these bhasma samples. Thus, it can be concluded that these ayurvedic medicines should be prepared strictly using the formulation methods as mentioned in the Ayurvedic texts. This will help the prepared products to adopt the inherent quality of the ancient system of medicine, which shall be useful and devoid of any side effects for human consumption.

scholarly journals Mineralogy and Geochemistry of the No. 5-2 High-Sulfur Coal from the Dongpo Mine, Weibei Coalfield, Shaanxi, North China, with Emphasis on Anomalies of Gallium and Lithium

Minerals ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 402 ◽  
Author(s):  
Qin ◽  
Cao ◽  
Wei ◽  
Wang ◽  
Liu
Keyword(s):  
Inductively Coupled Plasma ◽  
Northern China ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Taiyuan Formation ◽  
Reflected Light ◽  
Plasma Mass Spectrometry ◽  
Geological Factors ◽  
Felsic Volcanic

This paper reports the mineral compositions and geochemical characteristics of the No. 5-2 high-sulfur coal (Taiyuan Formation) from Dongpo Mine, Weibei Coalfield, Shaanxi, Northern China via transmitted and reflected light microscopy, scanning electron microscope equipped with an energy-dispersive X-ray spectrometer (SEM-EDS), X-ray diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), and X-ray fluorescence spectrometry (XRF). We also confirmed the input of intermediate-felsic volcanic ashes into the Taiyuan Formation coals in Dongpo Mine, Weibei Coalfield. The results show that Dongpo coals are enriched in Ga and Li compared to the average values for world hard coals, and they are depleted in Al2O3 compared to Chinese coals. The coal low temperature ash contains kaolinite, illite, quartz, calcite, pyrite, and to a lesser extent, chlorite, plagioclase, dolomite, ankerite, and apatite. The concentration anomalies of Ga and Li in No. 5-2 high-sulfur coal were not caused by the Benxi Formation Bauxite, but by the influence of multiple geological factors. The Middle Proterozoic moyite from the Yinshan Oldland led to the slightly higher Ga and Li contents of the No. 5-2 coal than those in world hard coals. Input of synchronization volcanic ash, injection of hydrothermal fluids during the syngenetic or early diagenetic stages and influence of seawater further contributed to the Ga and Li enrichment of the No. 5-2 coal.

scholarly journals Crystal Chemistry and Luminescence Properties of Eu-Doped Polycrystalline Hydroxyapatite Synthesized by Chemical Precipitation at Room Temperature

Crystals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 250 ◽  
Author(s):  
Francesco Baldassarre ◽  
Angela Altomare ◽  
Nicola Corriero ◽  
Ernesto Mesto ◽  
Maria Lacalamita ◽  
...  
Keyword(s):  
Fourier Transform ◽  
High Temperature ◽  
Inductively Coupled Plasma ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled

Europium-doped hydroxyapatite Ca10(PO4)6(OH)2 (3% mol) powders were synthesized by an optimized chemical precipitation method at 25 °C, followed by drying at 120 °C and calcination at 450 °C and 900 °C. The obtained nanosized crystallite samples were investigated by means of a combination of inductively coupled plasma (ICP) spectroscopy, powder X-ray diffraction (PXRD), Fourier Transform Infrared (FTIR), Raman and photoluminescence (PL) spectroscopies. The Rietveld refinement in the hexagonal P63/m space group showed europium ordered at the Ca2 site at high temperature (900 °C), and at the Ca1 site for lower temperatures (120 °C and 450 °C). FTIR and Raman spectra showed slight band shifts and minor modifications of the (PO4) bands with increasing annealing temperature. PL spectra and decay curves revealed significant luminescence emission for the phase obtained at 900 °C and highlighted the migration of Eu from the Ca1 to Ca2 site as a result of increasing calcinating temperature.

scholarly journals Generalized Methodology for Inserting Metal Heteroatoms into the Layered Zeolite Precursor RUB-36 by Interlayer Expansion

Crystals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 530 ◽  
Author(s):  
Chaoqun Bian ◽  
Xiao Wang ◽  
Lan Yu ◽  
Fen Zhang ◽  
Jie Zhang ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Catalytic Performance ◽  
X Ray Diffraction ◽  
Zeolite Sample ◽  
X Ray ◽  
Inductively Coupled ◽  
Temperature Programmed ◽  
First Time ◽  
N2 Sorption

The incorporation of metal heteroatoms into zeolites is an effective modification strategy for enhancing their catalytic performance. Herein, for the first time we report a generalized methodology for inserting metal heteroatoms (such as Sn, Fe, Zn, and Co) into the layered zeolite precursor RUB-36 via interlayer expansion by using the corresponding metal acetylacetate salt. Through this generalized methodology, Sn-JHP-1, Fe-JHP-1, Zn-JHP-1 and Co-JHP-1 zeolites could be successfully prepared by the reaction of RUB-36 and corresponding metal acetylacetate salt at 180 °C for 24 h in the presence of HCl solution. As a typical example, Sn-JHP-1 and calcined Sn-JHP-1 (Sn-JHP-2) zeolite is well characterized by the X-ray diffraction (XRD), diffuse reflectance ultraviolet-visible (UV-Vis), inductively coupled plasma (ICP), N2 sorption, temperature-programmed-desorption of ammonia (NH3-TPD) and X-ray photoelectron spectroscopy (XPS) techniques, which confirm the expansion of adjacent interlayers and thus the incorporation of isolated Sn sites within the zeolite structure. Notably, the obtained Sn-JHP-2 zeolite sample shows enhanced catalytic performance in the conversion of glucose to levulinic acid (LA) reaction.

scholarly journals Fe-Containing MOFs as Seeds for the Preparation of Highly Active Fe/Al-SBA-15 Catalysts in the NAlkylation of Aniline

Molecules ◽  
2019 ◽  
Vol 24 (15) ◽  
pp. 2695 ◽  
Author(s):  
Mhadmhan ◽  
Marquez-Medina ◽  
Romero ◽  
Reubroycharoen ◽  
Luque
Keyword(s):  
Photoelectron Spectroscopy ◽  
Inductively Coupled Plasma ◽  
Catalytic Performance ◽  
Alkylation Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Highly Active ◽  
Milling Method ◽  
Plasma Mass Spectrometry

We have successfully incorporated iron species into mesoporous aluminosilicates (AlSBA15) using a simple mechanochemical milling method. The catalysts were characterized by nitrogen physisorption, inductively coupled plasma mass spectrometry (ICP-MS), pyridine (PY) and 2,6-dimethylpyridine (DMPY) pulse chromatography titration, powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX). The catalysts were tested in the N-alkylation reaction of aniline with benzyl alcohol for imine production. According to the results, the iron sources, acidity of catalyst and reaction conditions were important factors influencing the reaction. The catalyst showed excellent catalytic performance, achieving 97% of aniline conversion and 96% of imine selectivity under optimized conditions.

The Properties of Modified Polysulfonamide Fabrics with Lamellar Magnesium Hydroxide Crystals

2013 ◽  
Vol 8 (2) ◽  
pp. 155892501300800
Author(s):  
Hui Ma ◽  
Linping Zhang ◽  
Hong Xu ◽  
Dan Wang ◽  
Xiaoyan Zhang ◽  
...  
Keyword(s):  
Magnesium Hydroxide ◽  
Inductively Coupled Plasma ◽  
Heat Insulation ◽  
Critical Role ◽  
Atomic Absorption Spectrometer ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled ◽  
Carboxylic Acid Groups ◽  
Flammability Test

Lamellar magnesium hydroxide crystals were prepared successfully on the surface of polysulfonamide fibers with carboxylic acid groups. The polysulfonamide fabrics with Mg(OH)2 crystals were characterized by Scanning electron microscopy, Inductively coupled plasma atomic absorption spectrometer X-ray diffraction, Vertical flammability test and Thermalgravimetric analysis. The vertical flammability test showed that the damaged length of original polysulfonamide fabrics was 34mm, while that of the polysulfonamide fabrics with Mg(OH)2 crystals (treated by 7.5% NaOH solutions) was 14mm. In addition, the Mg (OH)2 crystals played a critical role in the improvement of thermal stability and heat insulation of polysulfonamide fabrics.

Sign in / Sign up

Export Citation Format

Share Document