scholarly journals Performance Characteristics of n-Butanol-Diesel Fuel Blend Fired in a Turbo-Charged Compression Ignition Engine

2013 ◽  
Vol 01 (05) ◽  
pp. 77-83 ◽  
Author(s):  
Lennox Siwale ◽  
Lukács Kristóf ◽  
Torok Adam ◽  
Akos Bereczky ◽  
Antal Penninger ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Performance Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend

scholarly journals Combustion characteristics of compression ignition engine fuelled with rapeseed oil–diesel fuel–n-butanol blends

2021 ◽  
Vol 76 ◽  
pp. 17
Author(s):  
Jakub Čedík ◽  
Martin Pexa ◽  
Bohuslav Peterka ◽  
Miroslav Müller ◽  
Michal Holubek ◽  
...  
Keyword(s):  
Vegetable Oils ◽  
Diesel Fuel ◽  
Rapeseed Oil ◽  
Direct Injection ◽  
Combustion Characteristics ◽  
Solid Particles ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Fuel Blends

Liquid biofuels for compression ignition engines are often based on vegetable oils. In order to be used in compression ignition engine the vegetable oils have to be processed because of their high viscosity or it is also possible to use vegetable oils in fuel blends. In order to decrease the viscosity of the fuel blends containing crude vegetable oil the alcohol-based fuel admixtures can be used. The paper describes the effect of rapeseed oil–diesel fuel–n-butanol blends on combustion characteristics and solid particles production of turbocharged compression ignition engine. The 10% and 20% concentrations of n-butanol in the fuel blend were measured and analysed. The engine Zetor 1204, located in tractor Zetor Forterra 8641 with the power of 60kW and direct injection was used for the measurement. The engine was loaded through power take off shaft of the tractor using mobile dynamometer MAHA ZW500. The measurement was carried out in stabilized conditions at 20%, 60% and 100% engine load. The engine speed was kept at 1950 rpm. Tested fuel blends showed lower production of solid particles than diesel fuel and lower peak cylinder pressure and with increasing concentration of n-butanol in the fuel blend the ignition delay was prolonged and premixed phase of combustion was increased.

Combustion and emission characteristics of n-butanol/diesel fuel blend in a turbo-charged compression ignition engine

Fuel ◽  
2013 ◽  
Vol 107 ◽  
pp. 409-418 ◽  
Author(s):  
Lennox Siwale ◽  
Lukács Kristóf ◽  
Torok Adam ◽  
Akos Bereczky ◽  
Makame Mbarawa ◽  
...  
Keyword(s):  
Diesel Fuel ◽  
Emission Characteristics ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend

Binary Biodiesel Blend Endurance Characteristics in a Compression Ignition Engine

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Paramvir Singh ◽  
S. R. Chauhan ◽  
Varun Goel ◽  
Ashwani K. Gupta
Keyword(s):  
Diesel Fuel ◽  
Biodiesel Fuel ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Engine Operation ◽  
Endurance Tests ◽  
Ci Engines

The results obtained on wear assessment from a compression ignition (CI) engine fueled with a blend of 70% amla seed biodiesel (AB) and 30% eucalyptus oil (EU) on volume basis (called AB70EU30). The results showed stable engine operation and good operability of the engine-fuel system with the binary biodiesel fuel blend. The feasibility of this blend over a long-term endurance tests was explored. The specific assessment examination included the fate of cylinder head, pump plunger, injector nozzle, and piston crown, which affects the engine performance and engine life. The experimental results revealed better tribological performance characteristics with the binary fuel blend as compared to contemporary diesel fuel. No specific problem was encountered during the long-term endurance tests with the binary fuel blend using the modified engine parameters. The results show that the binary fuel mixture offers good potential for use as diesel fuel in CI engines while maintaining good performance and endurance.

Experimental Investigation on Emission Characteristics of Diesel N-Pentanol Blend in Homogeneous Charged Compression Ignition Engine

2021 ◽  
Vol 13 (3) ◽  
Author(s):  
S. Mathavan ◽  
T. Mothilal ◽  
V. Andal ◽  
V. Velukumar
Keyword(s):  
Diesel Fuel ◽  
Internal Combustion Engines ◽  
Fossil Fuels ◽  
Fuel Injection ◽  
Injection Pressure ◽  
Injection Timing ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Fuel Injection Pressure

The invention of internal combustion engines is undoubtedly one of the greatest inventions of the modern era. There has been steady scientific research to look for alternative fuel which is economical, renewable and less harmful to nature and man compared to fossil fuels. The present project is one such experimental work to investigate the performance of a blend of diesel / N-pentanol in an appropriate combustion technique and to establish its suitability as a renewable fuel. The relative performance of diesel fuel and the blend of diesel / n-pentanol will also be analyzed. Diesel fuel blended with 30 percentage n-pentanol is the fuel blend that is proposed to be used in the experiment. Researchers have established that the application of Homogeneously Charged Compression Ignition (HCCI) technique could result in in-cylinder reduction of NOx and PM. Higher thermal efficiency could also be attained. The project also covers studying the emission effect of the diesel/n-pentanol fuel blend for various fuel injection timing, various fuel injection pressure, different EGR rates and different inlet air temperature.

Impact of Binary Biofuel Blend on Lubricating Oil Degradation in a Compression Ignition Engine

2018 ◽  
Vol 141 (3) ◽  
Author(s):  
Paramvir Singh ◽  
S. R. Chauhan ◽  
Varun Goel ◽  
Ashwani K. Gupta
Keyword(s):  
Diesel Fuel ◽  
Technical Problem ◽  
Lubricating Oil ◽  
Engine Fuel ◽  
Compression Ignition ◽  
Endurance Test ◽  
Compression Ignition Engine ◽  
Fuel Blend ◽  
Blended Fuel ◽  
The Impact

This paper presents lubricating oil performance in a compression ignition (CI) engine fueled with a binary fuel blend of 70% aamla seed oil biodiesel and 30% eucalyptus oil (EU) on volume basis. This blended fuel was stable and congruent with engine-fuel system. Initially, the engine was operated with normal diesel fuel as per standard endurance test. The same endurance test was performed with the above binary biodiesel blended fuel in the engine under somewhat modified engine operational condition. The lubricating oil was examined at a specified interval to evaluate the impact of the fuel on lubricating oil properties. Quantification of various metal debris concentrations was carried out using inductive coupled plasma atomic emission spectroscopy. After experimentation, the lubricating oil samples were analyzed using analytical ferrography that showed lower wear debris concentrations from binary biodiesel blend than diesel fuel operated engine. The better lubricating property of binary biodiesel blended fuel resulted in lower wear and improved performance of engine parts. Relatively low wear and concentrations of all metal wear were found in the lubricating oil with binary biodiesel blended fuel engine revealed better performance of engine with this fuel blend. No technical problem was encountered during the long-term endurance tests with the binary biodiesel blended fuel under modified engine parameters.

scholarly journals A Multicomponent Blend as a Diesel Fuel Surrogate for Compression Ignition Engine Applications

2015 ◽  
Vol 137 (11) ◽  
Author(s):  
Yuanjiang Pei ◽  
Marco Mehl ◽  
Wei Liu ◽  
Tianfeng Lu ◽  
William J. Pitz ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Diesel Fuel ◽  
Flow Reactor ◽  
Expert Knowledge ◽  
Combustion Model ◽  
Compression Ignition ◽  
Compression Ignition Engine ◽  
Combined Mechanism ◽  
Fuel Surrogate ◽  
Skeletal Mechanism

A mixture of n-dodecane and m-xylene is investigated as a diesel fuel surrogate for compression ignition (CI) engine applications. Compared to neat n-dodecane, this binary mixture is more representative of diesel fuel because it contains an alkyl-benzene which represents an important chemical class present in diesel fuels. A detailed multicomponent mechanism for n-dodecane and m-xylene was developed by combining a previously developed n-dodecane mechanism with a recently developed mechanism for xylenes. The xylene mechanism is shown to reproduce experimental ignition data from a rapid compression machine (RCM) and shock tube (ST), speciation data from the jet stirred reactor and flame speed data. This combined mechanism was validated by comparing predictions from the model with experimental data for ignition in STs and for reactivity in a flow reactor. The combined mechanism, consisting of 2885 species and 11,754 reactions, was reduced to a skeletal mechanism consisting 163 species and 887 reactions for 3D diesel engine simulations. The mechanism reduction was performed using directed relation graph (DRG) with expert knowledge (DRG-X) and DRG-aided sensitivity analysis (DRGASA) at a fixed fuel composition of 77% of n-dodecane and 23% m-xylene by volume. The sample space for the reduction covered pressure of 1–80 bar, equivalence ratio of 0.5–2.0, and initial temperature of 700–1600 K for ignition. The skeletal mechanism was compared with the detailed mechanism for ignition and flow reactor predictions. Finally, the skeletal mechanism was validated against a spray flame dataset under diesel engine conditions documented on the engine combustion network (ECN) website. These multidimensional simulations were performed using a representative interactive flame (RIF) turbulent combustion model. Encouraging results were obtained compared to the experiments with regard to the predictions of ignition delay and lift-off length at different ambient temperatures.

Ethanol Fumigation of a Compression-Ignition Engine Using Advanced Injection of Diesel Fuel

1987 ◽  
Vol 30 (3) ◽  
pp. 0610-0614 ◽  
Author(s):  
Jonathan Chaplin ◽  
Rimfiel Bin Janius
Keyword(s):  
Diesel Fuel ◽  
Compression Ignition ◽  
Compression Ignition Engine
Sign in / Sign up

Export Citation Format

Share Document