scholarly journals Static Behavior of the Prestressed Concrete Deck Slab for Steel-Concrete Composite Two-Girder Bridges

2002 ◽  
Vol 14 (4) ◽  
pp. 503-512 ◽  
Keyword(s):  
Prestressed Concrete ◽  
Static Behavior ◽  
Girder Bridges ◽  
Concrete Deck ◽  
Deck Slab

Revisiting arching in deck slabs

1996 ◽  
Vol 23 (4) ◽  
pp. 973-981 ◽  
Author(s):  
Baidar Bakht
Keyword(s):  
Design Method ◽  
Field Tests ◽  
Scale Model ◽  
Girder Bridges ◽  
Transverse Arch ◽  
Deck Slabs ◽  
Arching Action ◽  
Girder Bridge ◽  
Concrete Deck ◽  
Deck Slab

The arching action in concrete deck slabs of girder bridges is generally recognized and is utilized by the Ontario Highway Bridge Design Code, and some other codes, to specify an empirical design method which leads to considerable savings in the amount of reinforcement. Despite this general recognition, there are some aspects of the arching action that are yet to be explored. To the knowledge of the author, all reported laboratory and field tests on deck slabs exploring its arching action under applied loads have been conducted by measuring strains in the bottom transverse reinforcement midway between the girders. Based on the results of tests on a full-scale model of a deck slab, it has been confirmed in this note that the transverse bottom reinforcement in the deck slab acts as a tie to the internal transverse arch in the slab. Because of embedment in concrete, the force in this reinforcement is the smallest midway between the girders, and not the largest as would be the case if the slab were in pure bending. Key words: arching in slabs, deck slabs, girder bridge, punching shear, steel-free deck slabs.

scholarly journals Effect of Skew Angles on Longitudinal Girder and Deck Slab of Prestressed Concrete T Beam Girder Bridges

2021 ◽  
Vol 9 (10) ◽  
pp. 414-420
Author(s):  
Ms. Ashwini Hanchate
Keyword(s):  
Prestressed Concrete ◽  
Bridge Decks ◽  
Bending Moment ◽  
Torsional Moment ◽  
Skew Angle ◽  
Skewed Bridges ◽  
Girder Bridges ◽  
Longitudinal Bending ◽  
Skew Angles ◽  
Deck Slab

Abstract: The present paper shows the effects of varying skew angles on pre-stressed concrete (PSC) bridges using finite elemental method. Studies are carried out on PSC bridge decks to understand the influence of skew angle and loading on behaviour of bridges. The results of skewed bridges are compared with straight bridges for IRC Class AA Tracked loading. Also, a comparative analysis of the response of skewed PSC Slab Bridge decks with that of equivalent straight bridge decks is made. The variation of maximum longitudinal bending moment (BM), maximum transverse moment, maximum torsional moment, and maximum longitudinal stresses deflection at obtuse corner, acute corner with skew angles are studied for bridge deck. It is found that Live load longitudinal bending moments decreases with an increase in skew angle, whereas a maximum transverse moment and maximum torsional moment increases with an increase in skew angle. The benefit of pre-stressing is reflected in considerable decrease in the longitudinal bending moment, transverse moment and longitudinal stresses. The models are analysed with the help of software CSI-Bridge V 20 Version. Keywords: Skew angle effect, Longitudinal moment, Transverse moment, CSI- Bridge software, Deck slab, Finite element method.

Deck slabs of skew girder bridges

1995 ◽  
Vol 22 (3) ◽  
pp. 514-523 ◽  
Author(s):  
Baidar Bakht ◽  
Akhilesh C. Agarwal
Keyword(s):  
Reinforced Concrete ◽  
Cross Section ◽  
Shear Failure ◽  
Highway Bridges ◽  
Steel Reinforcement ◽  
Fibre Reinforced Concrete ◽  
Girder Bridges ◽  
Deck Slabs ◽  
Concrete Deck ◽  
Deck Slab

Canadian codes allow the design of concrete deck slabs of slab-on-girder bridges by taking account of the internal arching action that develops in these slabs under concentrated wheel loads in particular. Provided that certain prescribed conditions are met, a deck slab is deemed to have met the design criteria if it is provided with a top and a bottom layer of steel reinforcement with each layer consisting of an orthogonal mesh of steel bars in which the area of cross section of the bars in each direction is at least 0.3% of the effective area of cross section of the deck slab. For deck slabs of bridges having skew angles greater than 20°, the codes require the minimum amount of reinforcement to be doubled in the end zones near the skew supports. Model testing has shown that need for such an increase can be eliminated by providing composite end diaphragms with high flexural rigidity in the horizontal plane. The proposed concept is tested on a model of fibre-reinforced concrete deck without steel reinforcement in which deficiencies in the confinement of the deck slab readily manifest themselves in form of a bending, rather than punching shear, failure. Key words: highway bridges, bridge decks, deck slabs, skew deck, skew bridges, fibre-reinforced concrete decks.

Study on Crack Causes and Strengthening Measures of Large Span PC Continuous Box Girder Bridges

2010 ◽  
Vol 163-167 ◽  
pp. 3551-3554
Author(s):  
Wei Peng ◽  
Zhi Xiang Zha
Keyword(s):  
Prestressed Concrete ◽  
Load Test ◽  
Box Girder Bridges ◽  
Element Analysis ◽  
Box Girder ◽  
Girder Bridges ◽  
Long Span ◽  
Concrete Box Girder Bridges ◽  
Girder Bridge ◽  
Engineering Projects

This template Based on cracks observation and finite element analysis of real engineering projects as well as bridge load test after reinforcement, causes and types of cracks in prestressed concrete box girder bridges and treating measurements are systematically studied. The results obtained from the calculation are presented to demonstrate the effect of sensitive factors, such as arrangement of longitudinal prestressed tendons, the magnitude of vertical prestressed force, temperature gradient, etc. The results show that the arrangement of longitudinal prestressed tendons and the magnitude of vertical prestressed force take key roles in cracks control of box girder webs. Lots of treating measurements are presented in accordance with different types of cracks, some of them are applied to a reinforcement engineering of a long span pretressed concrete continuous box girder bridge with cracks. Load test after reinforcement of the bridge demonstrates the reasonability of the treating measurements. Several design recommendations and construction measures about reinforcements and some sensitive factors mentioned above are proposed to control cracks.

Safe Platooning Headways on Girder Bridges

2021 ◽  
pp. 036119812110363
Author(s):  
Bowen Yang ◽  
Joshua S. Steelman ◽  
Jay A. Puckett ◽  
Daniel G. Linzell
Keyword(s):  
Prestressed Concrete ◽  
Limit State ◽  
Live Load ◽  
Load Effect ◽  
Operational Strategies ◽  
Reliability Indices ◽  
Girder Bridges ◽  
Legal Limits ◽  
Weigh In Motion ◽  
Load And Resistance Factor

Truck platooning—digitally linking two or more trucks to travel in a closely spaced convoy—is an emerging technology with the potential to save fuel and reduce labor. A framework is described to determine how much a platoon permit load might be increased above Federal Bridge Formula B legal limits, given strict control over the load characteristics and operational tactics. Soon, platoons are expected to advance not only with respect to traffic operations but also in their ability to weigh and report axle weight and spacing, functioning as mobile weigh-in-motion vehicles. Consequently, platoon live load statistics (bias and coefficient of variation) can differ from code assumptions, and are perhaps controllable, which poses a significant opportunity with respect to operational strategies. A parametric study is presented that examined safe headways between platooning trucks, considering different girder spacings, span lengths, numbers of spans, types of structure, truck configurations, numbers of trucks, and adjacent lane loading scenarios. The Strength I limit state was evaluated for steel and prestressed concrete I-girder bridges optimally designed using load and resistance factor design. Reliability indices, β, were calculated for each load case based on Monte Carlo simulation. Summary headway guidance was developed and is presented here to illustrate potential safe operational strategies for varying truck weights and platoon live load effect uncertainties.

Sign in / Sign up

Export Citation Format

Share Document