RESEARCH OF PARAMETRIC RELIABILITY OF TECHNOLOGICAL EQUIPMENT BY NOISE CHARACTERISTICS

2021 ◽  
pp. 110-123
Author(s):  
Sergey Anatolyevich Sokolov ◽  
Alexander Anatolyevich Yashonkov ◽  
Oleg Vladimirovich Yakovlev
Keyword(s):  
Technological Equipment ◽  
Noise Characteristics ◽  
Parametric Reliability

Noise Characteristics of a Reduced Blade Count Rotor with Improved Stage Efficiency

2019 ◽  
Author(s):  
Rainer Schädler ◽  
◽  
Dominic Hänni ◽  
Anestis Kalfas ◽  
Reza Abhari ◽  
...  
Keyword(s):  
Noise Characteristics ◽  
Stage Efficiency

Noise Characteristics and Thermal Decay in Single-layer Perpendicular Recording Media

1998 ◽  
Vol 22 (S_3_PMRS_98) ◽  
pp. S3_5-8
Author(s):  
Y. Hirayama ◽  
Y. Honda ◽  
K. Ito ◽  
T. Takeuchi ◽  
M. Futamoto
Keyword(s):  
Single Layer ◽  
Recording Media ◽  
Thermal Decay ◽  
Perpendicular Recording ◽  
Noise Characteristics

Gas Discharge Noise Characteristics of the Silent Discharge Type NOx Cleaning Systems

1995 ◽  
Vol 115 (2) ◽  
pp. 99-106
Author(s):  
Keiichi Uchimura ◽  
Michiharu Shoji ◽  
Tairo Itho ◽  
Jen-Shih Chang
Keyword(s):  
Gas Discharge ◽  
Silent Discharge ◽  
Noise Characteristics ◽  
Discharge Noise

Incentives of the State to promote the retrofitting of the agricultural sector: Regional considerations

2020 ◽  
Vol 16 (6) ◽  
pp. 1101-1113
Author(s):  
M.Sh. Gutuev ◽  
B.Sh. Ibragimova
Keyword(s):  
Agricultural Sector ◽  
Animal Husbandry ◽  
Technological Equipment ◽  
Agricultural Producers ◽  
Agricultural Technologies ◽  
Abstract Logic ◽  
Land Cultivation ◽  
Equipment Acquisition ◽  
Acquisition Costs ◽  
The Republic

Subject. The article discusses the availability of technological equipment in the agriculture of the Republic of Dagestan. Objectives. We analyze the current situation and trends in the development of available technological equipment in the republican agriculture, identify the role and place of machine and tractor fleet in the retrofitting of the regional agriculture. Methods. The study is based on monographic, abstract logic, statistical, analytical methods. Results. Dagestan has got a critically few technological equipment, which affects the development of the regional agricultural sector. The availability of technological equipment is found to have dramatically reduced in animal husbandry for the recent 30 years. The availability of technological equipment and land cultivation strongly correlates, thus simplifying applicable agricultural technologies. Most agricultural producers of Dagestan were found to be unable to participate in the program for federal agricultural lease. Conclusions and Relevance. The deterioration of available technological equipment in agriculture is a key cause undermining the competitiveness of products and efficiency of the regional agriculture. We prove the importance of governmental actions incentivizing the influx of new technological equipment, including a set of measures reinforcing the availability of technological equipment. As long as most agricultural producers are microbusinesses that lack resources to participate in many machine renovation programs, funding should be increased substantially to subsidize a portion of equipment acquisition costs incurred by agricultural producers, and a portion of reimbursed costs as much as at least 50 percent of the value of agricultural machines acquired.

IMPROVEMENT OF INNOVATIVE ACTIVITY OF THE ENTERPRISE

2017 ◽  
Author(s):  
Nataliya Stoyanets ◽  
◽  
Mathias Onuh Aboyi ◽  
Keyword(s):  
Value Chain ◽  
Net Present Value ◽  
Successful Implementation ◽  
Innovative Development ◽  
Technological Equipment ◽  
Alliance Partner ◽  
Innovation Potential ◽  
Wide Range ◽  
Technological Platform ◽  
The Cost

The article defines that for the successful implementation of an innovative project and the introduction of a new product into production it is necessary to use advanced technologies and modern software, which is an integral part of successful innovation by taking into account the life cycle of innovations. It is proposed to consider the general potential of the enterprise through its main components, namely: production and technological, scientific and technical, financial and economic, personnel and actual innovation potential. Base for the introduction of technological innovations LLC "ALLIANCE- PARTNER", which provides a wide range of support and consulting services, services in the employment market, tourism, insurance, translation and more. To form a model of innovative development of the enterprise, it is advisable to establish the following key aspects: the system of value creation through the model of cooperation with partners and suppliers; creating a value chain; technological platform; infrastructure, determine the cost of supply, the cost of activities for customers and for the enterprise as a whole. The system of factors of influence on formation of model of strategic innovative development of the enterprise is offered. The expediency of the cost of the complex of technological equipment, which is 6800.0 thousand UAH, is economically calculated. Given the fact that the company plans to receive funds under the program of socio-economic development of Sumy region, the evaluation of the effectiveness of the innovation project, the purchase of technological equipment, it is determined that the payback period of the project is 3 years 10 months. In terms of net present value (NPV), the project under study is profitable. The project profitability index (PI) meets the requirements for a positive decision on project implementation> 1.0. The internal rate of return of the project (IRR) also has a positive value of 22% because it exceeds the discount rate.

DEFINITION OF TIME SPENT ON REPAIR OF BUS TRANSMISSION UNITS TAKING INTO ACCOUNT TECHNOLOGICAL EQUIPMENT RELIABILITY

2020 ◽  
Vol 2020 (9) ◽  
pp. 29-33
Author(s):  
Sergey Bulatov
Keyword(s):  
Negative Impact ◽  
Probabilistic Method ◽  
Technological Equipment ◽  
Quality And Safety ◽  
Transmission Unit ◽  
Equipment Reliability ◽  
Hours Of Work ◽  
Definition Of ◽  
Time Decrease

The paper purpose is the effectiveness estimation in the technological equipment use, taking into account its reliability and productivity for defective transmission units of buses. The problem consists in the determination of time to be spent on repair of bus transmission units taking into account technological equipment reliability. In the paper there is used a probabilistic method for the prediction bus transmission units, and also a method of the dynamics of averages which allow ensuring minimum of costs for units downtime during repair and equipment cost. The need for repair of transmission units (gear box) arises on an average after 650 hours, the average productivity of the bench makes 4.2 bus / hour. The bench fails on the average after 4600 hours of work, the average time of the bench makes 2 hours. In such a way the solution of the problem specified allows analyzing the necessity of time decrease for transmission unit repair to avoid long downtimes of buses in repair areas without negative impact upon high repair quality and safety during the further operation.

A new magnetic resonance head coil and head immobilization device for gamma knife radiosurgery: an analysis of geometric distortion and signal/noise characteristics

2002 ◽  
Vol 97 ◽  
pp. 563-568 ◽  
Author(s):  
Paul Jursinic ◽  
Robert Prost ◽  
Christopher Schultz
Keyword(s):  
Magnetic Resonance ◽  
Gamma Knife Radiosurgery ◽  
Geometric Distortion ◽  
Gradient Field ◽  
Main Magnetic Field ◽  
Content Type ◽  
Signal Noise ◽  
Noise Characteristics ◽  
Head Coil ◽  
Fine Print

Object. The authors report on a new head coil into which the Leksell aluminum localization frame can be easily and securely mounted. Mechanically, the head coil interferes little with the patient. Methods. The head coil, which is for magnetic resonance (MR) imaging, is a 12-element quadrature transmitand-receive high-pass birdcage coil with a nominal operation frequency (63.86 MHz). The coil was built into a plastic housing. This new head coil minimizes patient motion and provides a 20% increase in signal/noise ratios compared with standard head coils. An MR image test phantom was mounted in the coil and this allowed quantification of image distortion due to inhomogeneities in the main magnetic field, nonlinearity in the gradient field, and paramagnetism of the aluminum headframe. There were no significant differences in geometric distortion between the new head coil and the standard coil. Conclusions. The new head coil has advantages for reducing patient movement artifacts and has a better signal/noise ratio with no reduction in geometric accuracy.

Study on acoustic and flow-induced noise characteristics of L-shaped duct with a shallow cavity

2020 ◽  
Vol 68 (3) ◽  
pp. 209-225
Author(s):  
Masaaki Mori ◽  
Kunihiko Ishihara
Keyword(s):  
Air Conditioning ◽  
Sound Field ◽  
Frequency Range ◽  
Acoustic Characteristics ◽  
Inflow Velocity ◽  
Aerodynamic Sound ◽  
Noise Characteristics ◽  
Flow Induced Noise ◽  
Shallow Cavity ◽  
Conditioning Equipment

An aerodynamic sound generated by a flow inside a duct is one of the noise pro- blems. Flows in ducts with uneven surfaces such as grooves or cavities can be seen in various industrial devices and industrial products such as air-conditioning equipment in various plants or piping products. In this article, we have performed experiments and simulations to clarify acoustic and flow-induced sound characteris- tics of L-shaped duct with a shallow cavity installed. The experiments and simula- tions were performed under several inflow velocity conditions. The results show that the characteristics of the flow-induced sound in the duct are strongly affected by the acoustic characteristics of the duct interior sound field and the location of the shallow cavity. Especially, it was found that the acoustic characteristics were af- fected by the location of the shallow cavity in the frequency range between 1000 Hz and 1700 Hz.

Sign in / Sign up

Export Citation Format

Share Document