PROSPECTS FOR LOCAL MINERAL AND RAW MATERIALS USE FOR THE DEVELOPMENT OF THE SOUTHWESTERN REGION OF GOMEL REGION

2020 ◽  
pp. 77-87
Author(s):  
Ivan I. Lishtvan ◽  
Boris V. Kurzo ◽  
Oleg M. Gaidukevich ◽  
Alexandr I. Sorokin

The results of the study of the resource potential of Lelchitsky and adjacent regions are presented. It is shown that the raw materials for the production of crushed stone and natural stone in the amount of 1 million m3 is actively extracted in the region with the prospect of volume increasing up to 10 million m3. In addition, peat and sapropel are mined for the production of organic fertilizers, feed additives and drilling fluids. Brown coal and bentonite clay deposits are promising for mining. Peat, sapropel and brown coal should be considered to be raw materials for complex deep processing with the release of more products and materials with high added value. The obtained results allow to conclude that the development of Lelchitsky region and the economic feasibility of building Polesie section of the railway is possible only through integrated development and the most complete use of the entire resource base of the region.

Georesursy ◽  
2019 ◽  
Vol 21 (3) ◽  
pp. 79-90 ◽  
Author(s):  
Peter E. Belousov ◽  
Victoria V. Krupskaya

Bentonite clay is an important natural material, widely used in many industries. The purpose of this article is to analyze the mineral resource base of bentonite clays in Russia. The data on reserves of deposits, the degree of their development and production volumes are given. The composition and uses of the main developed deposits of bentonite clay in Russia are characterized. A comparative analysis of the reserves and production growth of bentonite over the past decade is carried out. A brief description of the world situation is given, and the mineral resource base of the CIS countries is considered. Since the quality of raw materials, its properties and reserves directly depend on the conditions of origin, a characteristic of the geological and tectonic position and genesis of the bentonite clay deposits of Russia is given. Bentonite-bearing provinces with favorable conditions for the formation of bentonite deposits with volcanogenic-sedimentary genesis are considered. The most promising regions are proposed for the purposes of expanding the mineral resource base of bentonite materials. This work is the result of the authors’ own geological works at various deposits of bentonite clays in Russia, the near and far abroad, as well as the study and interpretation of published materials on this subject over the past decades.


2013 ◽  
Vol 66 (4) ◽  
pp. 485-491 ◽  
Author(s):  
Isabelle A. Silva ◽  
Julliana Marques R. Costa ◽  
Romualdo R. Menezes ◽  
Heber S. Ferreira ◽  
Gelmires de A. Neves ◽  
...  

New bentonite clay deposits have recently been discovered in the state of Paraíba, mainly in the municipalities of Cubati and Pedra Lavrada, creating great expectations in view of the possibility of expanding industrial production using these new reserves. The aim of this study was to study the new occurrences of bentonite clay in Paraíba, particularly in the municipality of Pedra Lavrada, for use in water based drilling fluids. The mineralogical properties of the clays were characterized by particle size analysis using laser diffraction, and thermogravimetric and differential thermal analysis, and its chemical composition was analyzed by X-ray fluorescence, X-ray diffraction, cation exchange capacity and specific surface area. The bentonite clays were treated with sodium carbonate at concentrations of 75, 100, 125, 150 and 175mEq/100g of dry clay, to transform them from polycationic to sodium form. For the technological characterization, drilling fluids were prepared according to the standards of Petrobras. The results indicated that the mineralogical composition of the samples consisted of montmorillonite, kaolinite and quartz. As for their rheological properties, the samples were found to partially meet the rheological requirements of the Petrobras standard.


2021 ◽  
Author(s):  
Oleg Sidorenko

The manual describes technologies for processing secondary products and agricultural waste using macro-and micro-organisms. The regulations of modern biotechnologies of microbial synthesis, bioconversion of secondary raw materials are briefly presented, methods of its processing and characteristics of the obtained target products of bioconversion are described. Practical classes introduce students to modern methods of improving environmental quality and production waste from commercial products (organic fertilizers, bacterial preparations, feed additives, etc.), as well as obtain the cheapest fuel and energy resources (biogas, alcohols, acids, liquid biofuels, etc.). Meets the requirements of Federal state educational standards of higher education of the last generation. It is intended for students of higher educational institutions of technological specialties.


Author(s):  
V.I Golik ◽  
◽  
V.A. Atrushkevich ◽  
A.N. Dulin ◽  
◽  
...  

The article contains a rationale for the economic and environmental feasibility of extracting useful components from low-grade coal-containing raw materials, which can increase the recoverable value of coal due to the added value of commercial products from coal waste to a level of profitability, improves the environmental situation and repeatedly increases the resource base of enterprises. It is shown that the Donbass mines restructuring program has damaged the Russian economy and weakened the competitiveness of Russian coal production on the world market for many years, since the coal reserves written off are many times more valuable than the values determined by the Program.


2020 ◽  
Vol 14 (02) ◽  
pp. 137
Author(s):  
Andrew Setiawan Rusdianto ◽  
Winda Amilia ◽  
Doni Adi Nugroho

Agroindustry is an industry that processes agricultural products from raw materials. Agroindustry increase the added value of agricultural commodities. Virgin coconut oil (VCO) product have high economic value because it has many benefits for health and beauty care as well. One of the industries processing coconut into a VCO product in Jember on an SME (Small Medium Enterprises) scale is located in Sukorejo, Jember Regency. The economic feasibility showed that its VCO industry business had a positive NPV. The BC Ratio value less than 1, which means that cash in flow was bigger than cash out flow, in the present value called Break Even Point (BEP), that is, total cost equals total revenue. IRR value that is generated is greater > 6% loan interest, and the last payback period (PBP), which is produced shows the value (less than) <10 years. In accordance with the specified time period of 5 years and 4 months. From the results of the analysis, it can be said that the VCO industry in Sukorejo, Sumbersari District was feasible to do. Keywords: economic feasibility, virgin coconut oil


10.12737/2216 ◽  
2014 ◽  
Vol 8 (4) ◽  
pp. 112-116
Author(s):  
Дулина ◽  
Anna Dulina ◽  
Лазько ◽  
Marina Lazko ◽  
Удалова ◽  
...  

The article is devoted to one of the most pressing problems of the modern poultry industry - the study of the efficacy of feed additives and their effect on the egg production of poultry. From our results, that such food additives, as vitamin and mineral premix and protein-vitamin-mineral concentrate, have a high nutritional value and have a marked positive effect on the productivity, safety and physiological condition of hens cross «Hisex Brown&#34; virtually all age groups without increasing both the cost of feed, and the cost of feed. Such action premixes can only result from the normalization of metabolism and enhance the functional activity of basic systems. The observed positive effects we associate with a unique vitamin, lipid, mineral composition of the feed additive. When using the pre-mix in poultry feeding significantly increased digestibility of nutrients feed, feed consumption per unit of production - is declining. More appropriate to prepare feed stuff or in factories or on poultry from the available raw materials using vitamin and mineral premixes. In these conditions, reduce the economic feasibility of using BVMK. All that is included in BVMK can enter the feed in a set of raw materials, while in some cases the savings can reach 40% or more. Reduction in price is due to eliminate redundant operations in blending, mixing, packaging and transport BVMK.


2015 ◽  
pp. 103-108
Author(s):  
R. E. Shesterikova ◽  
E. A. Shesterikova ◽  
M. V. Popov

It is known that development of gas, gas-condensate and oil deposits is related with production of associated mineralized water. For creation of highly profitable processes of production and processing of hydrocarbons the methods of utilization of secondary sources of raw materials and energy become very important. The volumes of produced associated water at the petroleum complex facilities are so great, that it permits to consider them as a source of raw materials for processing with further receiving various commodity products, for example, process liquids, drilling fluids, iodine, bromine and their compounds.


2019 ◽  
Vol 24 (94/4) ◽  
pp. 27-32
Author(s):  
T.S. Skoblo ◽  
I.N. Rybalko ◽  
A.V. Tihonov ◽  
T.V. Maltsev

The possibility of using a non-magnetic fraction of a detonation charge with a diamond fraction from the disposal of ammunition to modify the restoration coatings of a natural product – clay and secondary raw materials — was studied. Four different coating variants were investigated. For this, a T-620 electrode was used with its additional modification by coating with bentonite clay, as well as with a non-magnetic fraction of the detonation charge and applying it in the form of a slip coating on the cutting surface of the cultivator. It is shown that the use of such additives allows to increase the resistance of the working tool of agricultural machines, reduces its tendency to damage due to the minimum penetration of the thin-walled product of the hoe blade and a decrease in the cross section of the transition layer and the level of stress. Each modifier makes changes to increase the microhardness to varying degrees. An increase in microhardness is observed on the surface of the coating and its gradual decrease to the transition layer. The surface coating with the additional introduction of bentonite clay in a liquid bath has the highest microhardness. Its microhardness varies from HV-50-1009.7 to HV-50-615.2. Similarly, the effect of the modifying additive of the detonation charge, the microhardness varies from HV-50-969.6 to HV-50-633.26. When clay or a mixture is introduced into the restoration coating, the wear resistance increases by 1.3 - 2 times with respect to the deposited surfacing only by the electrode and by 2 - 3 times to the initial material of the cultivator. It was found that the lowest coefficient is characteristic for dry friction, as well as for hydroabrasive, for samples with additional modification with clay or a detonation charge


Author(s):  
S. Sukhanova ◽  
N. Pozdnyakova ◽  
F. Yaroslavtsev

The results of researches on the development of new mineral feed additives based on raw materials produced by Uralchem and the study of the eff ectiveness of their use in the rations of lactating cows have been presented in the article. The experiment has been carried out in the conditions of LLC “PF Barabinskoe” in the Dalmatovsky area in the Kurgan region where 3 groups of lactating cows of Black-and-White breed have been formed. Animals in the control group have been received the ration adopted in the farm, the 1st experimental group with the additive RusMA No. 1 at a dose of 150 g, the 2nd experimental group– with the additive RusMA No. 2 at the dose of 350 g. The use of experimental mineral additives in feeding lactating cows allowed us to increase their milk productivity and profi tability of production. At the same time, the best eff ectiveness was shown by the additive RusMA No. 2 at the dose of 350 g/head/day. The use of RusMA additives during the experiment period (105 days) allowed to increase the milk productivity of cows in the 1st experimental group by 6,03 % and in the 2nd experimental group by 8,24 %. Taking into account the fat content in milk, this diff erence was 6,31 and 8,53 %, respectively. The energy value of milk from cows of the experimental groups was higher compared to the control group by 2,45 and 1,76 %, respectively. According to the content of dry matter in milk, cows of the 2nd experimental group exceeded the control and 1st experimental group by 0,39 and 0,12 abs.%, respectively. The maximum milk fat content has been observed in the milk of cows of the 1st experimental group by 0,03 and 0,01 abs.% more than in the control and 2nd experimental groups, respectively. In terms of protein content, the cows of the 2nd experimental group signifi cantly exceeded the control group by 0,10 abs.% and the 1st experimental by 0,04 abs.%. The content of milk sugar in the 2nd experimental group was higher than in the control by 0,30 abs.% and compared to the 1st experimental by 0,11 %. Signifi cantly more calcium and phosphorus were contained in the milk of cows of the 2nd experimental group by 4,58 % (Р ≤ 0,001) and 2,86 % (Р ≤ 0,05), compared with the control group. The expenditures of feed in the EFU for the production of 1 kg of milk in animals of the 2nd experimental group was less by 5,13 % than in control cows and by 2,63 % compared to the 1st experimental group. The prime cost of 1 centner of milk was lower in the 2nd experimental group by 3,94 %, in the 1st experimental group by 2,65 % compared to the control group. The level of profi tability of milk production in the 2nd experimental group was higher by 9,0 and 1,0 abs.% in comparison with the control and 1st experimental groups, respectively.


Processes ◽  
2021 ◽  
Vol 9 (7) ◽  
pp. 1221
Author(s):  
Domenico Frattini ◽  
Gopalu Karunakaran ◽  
Eun-Bum Cho ◽  
Yongchai Kwon

The use of microbial fuel cells (MFCs) is quickly spreading in the fields of bioenergy generation and wastewater treatment, as well as in the biosynthesis of valuable compounds for microbial electrolysis cells (MECs). MFCs and MECs have not been able to penetrate the market as economic feasibility is lost when their performances are boosted by nanomaterials. The nanoparticles used to realize or decorate the components (electrodes or the membrane) have expensive processing, purification, and raw resource costs. In recent decades, many studies have approached the problem of finding green synthesis routes and cheap sources for the most common nanoparticles employed in MFCs and MECs. These nanoparticles are essentially made of carbon, noble metals, and non-noble metals, together with a few other few doping elements. In this review, the most recent findings regarding the sustainable preparation of nanoparticles, in terms of syntheses and sources, are collected, commented, and proposed for applications in MFC and MEC devices. The use of naturally occurring, recycled, and alternative raw materials for nanoparticle synthesis is showcased in detail here. Several examples of how these naturally derived or sustainable nanoparticles have been employed in microbial devices are also examined. The results demonstrate that this approach is valuable and could represent a solid alternative to the expensive use of commercial nanoparticles.


Sign in / Sign up

Export Citation Format

Share Document