scholarly journals Assessing regional scale predictions of aerosols, marine stratocumulus, and their interactions during VOCALS-REx using WRF-Chem

2011 ◽  
Vol 11 (23) ◽  
pp. 11951-11975 ◽  
Author(s):  
Q. Yang ◽  
J. D. Fast ◽  
H. Wang ◽  
R. C. Easter ◽  
H. Morrison ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Optical Properties ◽  
Cloud Droplet ◽  
Energy Fluxes ◽  
Microphysics Scheme ◽  
Marine Stratocumulus ◽  
Aerosol Cloud ◽  
Southeast Pacific ◽  
Temperature And Humidity ◽  
Stratocumulus Clouds

Abstract. This study assesses the ability of the recent chemistry version (v3.3) of the Weather Research and Forecasting (WRF-Chem) model to simulate boundary layer structure, aerosols, stratocumulus clouds, and energy fluxes over the Southeast Pacific Ocean. Measurements from the VAMOS Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx) and satellite retrievals (i.e., products from the MODerate resolution Imaging Spectroradiometer (MODIS), Clouds and Earth's Radiant Energy System (CERES), and GOES-10) are used for this assessment. The Morrison double-moment microphysics scheme is newly coupled with interactive aerosols in the model. The 31-day (15 October–16 November 2008) WRF-Chem simulation with aerosol-cloud interactions (AERO hereafter) is also compared to a simulation (MET hereafter) with fixed cloud droplet number concentrations in the microphysics scheme and simplified cloud and aerosol treatments in the radiation scheme. The well-simulated aerosol quantities (aerosol number, mass composition and optical properties), and the inclusion of full aerosol-cloud couplings lead to significant improvements in many features of the simulated stratocumulus clouds: cloud optical properties and microphysical properties such as cloud top effective radius, cloud water path, and cloud optical thickness. In addition to accounting for the aerosol direct and semi-direct effects, these improvements feed back to the simulation of boundary-layer characteristics and energy budgets. Particularly, inclusion of interactive aerosols in AERO strengthens the temperature and humidity gradients within the capping inversion layer and lowers the marine boundary layer (MBL) depth by 130 m from that of the MET simulation. These differences are associated with weaker entrainment and stronger mean subsidence at the top of the MBL in AERO. Mean top-of-atmosphere outgoing shortwave fluxes, surface latent heat, and surface downwelling longwave fluxes are in better agreement with observations in AERO, compared to the MET simulation. Nevertheless, biases in some of the simulated meteorological quantities (e.g., MBL temperature and humidity) and aerosol quantities (e.g., underestimations of accumulation mode aerosol number) might affect simulated stratocumulus and energy fluxes over the Southeastern Pacific, and require further investigation. The well-simulated timing and outflow patterns of polluted and clean episodes demonstrate the model's ability to capture daily/synoptic scale variations of aerosol and cloud properties, and suggest that the model is suitable for studying atmospheric processes associated with pollution outflow over the ocean. The overall performance of the regional model in simulating mesoscale clouds and boundary layer properties is encouraging and suggests that reproducing gradients of aerosol and cloud droplet concentrations and coupling cloud-aerosol-radiation processes are important when simulating marine stratocumulus over the Southeast Pacific.

scholarly journals Assessing regional scale predictions of aerosols, marine stratocumulus, and their interactions during VOCALS-REx using WRF-Chem

2011 ◽  
Vol 11 (8) ◽  
pp. 22663-22718 ◽  
Author(s):  
Q. Yang ◽  
J. D. Fast ◽  
H. Wang ◽  
R. C. Easter ◽  
H. Morrison ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Cloud Base ◽  
Model Assessment ◽  
Microphysics Scheme ◽  
Marine Stratocumulus ◽  
Aerosol Cloud ◽  
Southeastern Pacific ◽  
Temperature And Humidity ◽  
Stratocumulus Clouds ◽  
Aerosol Cloud Interactions

Abstract. In the recent chemistry version (v3.3) of the Weather Research and Forecasting (WRF-Chem) model, we have coupled the Morrison double-moment microphysics scheme with interactive aerosols so that two-way aerosol-cloud interactions are included in the simulations. We have used this new WRF-Chem functionality in a study focused on assessing predictions of aerosols, marine stratocumulus clouds, and their interactions over the Southeast Pacific using measurements from the VAMOS Ocean-Cloud-Atmosphere-Land Study Regional Experiment (VOCALS-REx) and satellite retrievals. This study also serves as a detailed analysis of our WRF-Chem simulations contributed to the VOCALS model Assessment (VOCA) project. The WRF-Chem 31-day (15 October–16 November 2008) simulation with aerosol-cloud interactions (AERO hereafter) is also compared to a simulation (MET hereafter) with fixed cloud droplet number concentrations assumed by the default in Morrison microphysics scheme with no interactive aerosols. The well-predicted aerosol properties such as number, mass composition, and optical depth lead to significant improvements in many features of the simulated stratocumulus clouds: cloud optical properties and microphysical properties such as cloud top effective radius, cloud water path, and cloud optical thickness, and cloud macrostructure such as cloud depth and cloud base height. In addition to accounting for the aerosol direct and semi-direct effects, these improvements feed back to the prediction of boundary-layer characteristics and energy budgets. Particularly, inclusion of interactive aerosols in AERO strengthens the temperature and humidity gradients within the capping inversion layer and lowers the marine boundary layer depth by 150 m from that of the MET simulation. Mean top-of-the-atmosphere outgoing shortwave fluxes, surface latent heat, and surface downwelling longwave fluxes are in better agreement with observations in AERO, compared to the MET simulation. Nevertheless, biases in some of the simulated meteorological quantities (e.g., MBL temperature and humidity over the remote ocean) and aerosol quantities (e.g., overestimations of supermicron sea salt mass) might affect simulated stratocumulus and energy fluxes over the southeastern Pacific Ocean, and require further investigations. Although not perfect, the overall performance of the regional model in simulating mesoscale aerosol-cloud interactions is encouraging and suggests that the inclusion of spatially varying aerosol characteristics is important when simulating marine stratocumulus over the southeastern Pacific.

scholarly journals Aircraft observations of aerosol, cloud, precipitation, and boundary layer properties in pockets of open cells over the southeast Pacific

2014 ◽  
Vol 14 (15) ◽  
pp. 8071-8088 ◽  
Author(s):  
C. R. Terai ◽  
C. S. Bretherton ◽  
R. Wood ◽  
G. Painter
Keyword(s):  
Boundary Layer ◽  
Cloud Condensation Nuclei ◽  
Surface Wind ◽  
Cloud Droplet ◽  
Cloud Base ◽  
Cold Pool ◽  
Accumulation Mode ◽  
Aerosol Cloud ◽  
Wide Range ◽  
Southeast Pacific

Abstract. Five pockets of open cells (POCs) are studied using aircraft flights from the VOCALS Regional Experiment (VOCALS-REx), conducted in October and November 2008 over the southeast Pacific Ocean. Satellite imagery from the geostationary satellite GOES-10 is used to distinguish POC areas, and measurements from the aircraft flights are used to compare aerosol, cloud, precipitation, and boundary layer conditions inside and outside of POCs. Conditions observed across individual POC cases are also compared. POCs are observed in boundary layers with a wide range of inversion heights (1250 to 1600 m) and surface wind speeds (5 to 11 m s−1) and show no remarkable difference from the observed surface and free-tropospheric conditions during the two months of the field campaign. In all cases, compared to the surrounding overcast region the POC boundary layer is more decoupled, supporting both thin stratiform and deeper cumulus clouds. Although cloud-base precipitation rates are higher in the POC than the overcast region in each case, a threshold precipitation rate that differentiates POC precipitation from overcast precipitation does not exist. Mean cloud-base precipitation rates in POCs can range from 1.7 to 5.8 mm d−1 across different POC cases. The occurrence of heavy drizzle (> 0 dBZ) lower in the boundary layer better differentiates POC precipitation from overcast precipitation, likely leading to the more active cold pool formation in POCs. Cloud droplet number concentration is at least a factor of 8 smaller in the POC clouds, and the ratio of drizzle water to cloud water in POC clouds is over an order of magnitude larger than that in overcast clouds, indicating an enhancement of collision–coalescence processes in POC clouds. Despite large variations in the accumulation-mode aerosol concentrations observed in the surrounding overcast region (65 to 324 cm−3), the accumulation-mode aerosol concentrations observed in the subcloud layer of all five POCs exhibit a much narrower range (24 to 40 cm−3), and cloud droplet concentrations within the cumulus updrafts originating in this layer reflect this limited variability. Above the POC subcloud layer exists an ultraclean layer with accumulation-mode aerosol concentrations < 5 cm−3, demonstrating that in-cloud collision–coalescence processes efficiently remove aerosols. The existence of the ultraclean layer also suggests that the major source of accumulation-mode aerosols, and hence of cloud condensation nuclei in POCs, is the ocean surface, while entrainment of free-tropospheric aerosols is weak. The measurements also suggest that at approximately 30 cm−3 a balance of surface source and coalescence scavenging sinks of accumulation-mode aerosols maintain the narrow range of observed subcloud aerosol concentrations.

scholarly journals Deconvolution of boundary layer depth and aerosol constraints on cloud water path in subtropical stratocumulus decks

2020 ◽  
Vol 20 (6) ◽  
pp. 3609-3621
Author(s):  
Anna Possner ◽  
Ryan Eastman ◽  
Frida Bender ◽  
Franziska Glassmeier
Keyword(s):  
Boundary Layer ◽  
Radiative Forcing ◽  
Cloud Droplet ◽  
Process Modelling ◽  
Liquid Water Path ◽  
Marine Stratocumulus ◽  
Water Path ◽  
Aerosol Cloud ◽  
Aerosol Cloud Interactions ◽  
Relative Change

Abstract. The liquid water path (LWP) adjustment due to aerosol–cloud interactions in marine stratocumulus remains a considerable source of uncertainty for climate sensitivity estimates. An unequivocal attribution of LWP adjustments to changes in aerosol concentration from climatology remains difficult due to the considerable covariance between meteorological conditions alongside changes in aerosol concentrations. We utilise the susceptibility framework to quantify the potential change in LWP adjustment with boundary layer (BL) depth in subtropical marine stratocumulus. We show that the LWP susceptibility, i.e. the relative change in LWP scaled by the relative change in cloud droplet number concentration, in marine BLs triples in magnitude from −0.1 to −0.31 as the BL deepens from 300 to 1200 m and deeper. We further find deep BLs to be underrepresented in pollution tracks, process modelling, and in situ studies of aerosol–cloud interactions in marine stratocumulus. Susceptibility estimates based on these approaches are skewed towards shallow BLs of moderate LWP susceptibility. Therefore, extrapolating LWP susceptibility estimates from shallow BLs to the entire cloud climatology may underestimate the true LWP adjustment within subtropical stratocumulus and thus overestimate the effective aerosol radiative forcing in this region. Meanwhile, LWP susceptibility estimates in deep BLs remain poorly constrained. While susceptibility estimates in shallow BLs are found to be consistent with process modelling studies, they overestimate pollution track estimates.

scholarly journals Microphysical variability in southeast Pacific Stratocumulus clouds: synoptic conditions and radiative response

2010 ◽  
Vol 10 (13) ◽  
pp. 6255-6269 ◽  
Author(s):  
D. Painemal ◽  
P. Zuidema
Keyword(s):  
Boundary Layer ◽  
Cloud Droplet ◽  
Static Stability ◽  
Radiative Properties ◽  
Free Troposphere ◽  
Subtropical Anticyclone ◽  
Lower Cloud ◽  
Synoptic Conditions ◽  
Southeast Pacific ◽  
Stratocumulus Clouds

Abstract. Synoptic and satellite-derived cloud property variations for the southeast Pacific stratocumulus region associated with changes in coastal satellite-derived cloud droplet number concentrations (Nd) are explored. MAX and MIN Nd composites are defined by the top and bottom terciles of daily area-mean Nd values over the Arica Bight, the region with the largest mean oceanic Nd, for the five October months of 2001, 2005, 2006, 2007 and 2008. The ability of the satellite retrievals to capture composite differences is assessed with ship-based data. Nd and ship-based accumulation mode aerosol concentrations (Na) correlate well (r = 0.65), with a best-fit aerosol activation value dln Nddln Na of 0.56 for pixels with Nd>50 cm−3. The adiabatically-derived MODIS cloud depths also correlate well with the ship-based cloud depths (r=0.7), though are consistently higher (mean bias of almost 60 m). The MAX-Nd composite is characterized by a weaker subtropical anticyclone and weaker winds both at the surface and the lower free troposphere than the MIN-Nd composite. The MAX-Nd composite clouds over the Arica Bight are thinner than the MIN-Nd composite clouds, have lower cloud tops, lower near-coastal cloud albedos, and occur below warmer and drier free tropospheres (as deduced from radiosondes and NCEP Reanalysis). CloudSat radar reflectivities indicate little near-coastal precipitation. The co-occurrence of more boundary-layer aerosol/higher Nd within a more stable atmosphere suggests a boundary layer source for the aerosol, rather than the free troposphere. The MAX-Nd composite cloud thinning extends offshore to 80° W, with lower cloud top heights out to 95° W. At 85° W, the top-of-atmosphere shortwave fluxes are significantly higher (~50%) for the MAX-Nd composite, with thicker, lower clouds and higher cloud fractions than for the MIN-Nd composite. The change in Nd at this location is small (though positive), suggesting that the MAX-MIN Nd composite differences in radiative properties primarily reflects synoptic changes. Circulation anomalies and a one-point spatial correlation map reveal a weakening of the 850 hPa southerly winds decreases the free tropospheric cold temperature advection. The resulting increase in the static stability along 85° W is highly correlated to the increased cloud fraction, despite accompanying weaker free tropospheric subsidence.

scholarly journals Modeling microphysical effects of entrainment in clouds observed during EUCAARI-IMPACT field campaign

2013 ◽  
Vol 13 (16) ◽  
pp. 8489-8503 ◽  
Author(s):  
D. Jarecka ◽  
H. Pawlowska ◽  
W. W. Grabowski ◽  
A. A. Wyszogrodzki
Keyword(s):  
Boundary Layer ◽  
Turbulent Mixing ◽  
Marine Boundary Layer ◽  
Cloud Droplet ◽  
Droplet Radius ◽  
Subgrid Scale ◽  
Microphysics Scheme ◽  
Local Conditions ◽  
Field Campaign ◽  
Les Model

Abstract. This paper discusses aircraft observations and large-eddy simulation (LES) modeling of 15 May 2008, North Sea boundary-layer clouds from the EUCAARI-IMPACT field campaign. These clouds are advected from the northeast by the prevailing lower-tropospheric winds and featured stratocumulus-over-cumulus cloud formations. An almost-solid stratocumulus deck in the upper part of the relatively deep, weakly decoupled marine boundary layer overlays a field of small cumuli. The two cloud formations have distinct microphysical characteristics that are in general agreement with numerous past observations of strongly diluted shallow cumuli on one hand and solid marine stratocumulus on the other. Based on the available observations, a LES model setup is developed and applied in simulations using a novel LES model. The model features a double-moment warm-rain bulk microphysics scheme combined with a sophisticated subgrid-scale scheme allowing local prediction of the homogeneity of the subgrid-scale turbulent mixing. The homogeneity depends on the characteristic time scales for the droplet evaporation and for the turbulent homogenization. In the model, these scales are derived locally based on the subgrid-scale turbulent kinetic energy, spatial scale of cloudy filaments, mean cloud droplet radius, and humidity of the cloud-free air entrained into a cloud, all predicted by the LES model. The model reproduces contrasting macrophysical and microphysical characteristics of the cumulus and stratocumulus cloud layers. Simulated subgrid-scale turbulent mixing within the cumulus layer and near the stratocumulus top is on average quite inhomogeneous, but varies significantly depending on the local conditions.

scholarly journals Southeast Pacific stratocumulus clouds, precipitation and boundary layer structure sampled along 20° S during VOCALS-REx

2010 ◽  
Vol 10 (21) ◽  
pp. 10639-10654 ◽  
Author(s):  
C. S. Bretherton ◽  
R. Wood ◽  
R. C. George ◽  
D. Leon ◽  
G. Allen ◽  
...  
Keyword(s):  
Boundary Layer ◽  
Liquid Water ◽  
Vertical Structure ◽  
Layer Structure ◽  
Cloud Droplet ◽  
Free Troposphere ◽  
Liquid Water Path ◽  
Typical Structure ◽  
Southeast Pacific ◽  
Over The Top

Abstract. Multiplatform airborne, ship-based, and land-based observations from 16 October–15 November 2008 during the VOCALS Regional Experiment (REx) are used to document the typical structure of the Southeast Pacific stratocumulus-topped boundary layer and lower free troposphere on a~transect along 20° S between the coast of Northern Chile and a buoy 1500 km offshore. Strong systematic gradients in clouds, precipitation and vertical structure are modulated by synoptically and diurnally-driven variability. The boundary layer is generally capped by a strong (10–12 K), sharp inversion. In the coastal zone, the boundary layer is typically 1 km deep, fairly well mixed, and topped by thin, nondrizzling stratocumulus with accumulation-mode aerosol and cloud droplet concentrations exceeding 200 cm−3. Far offshore, the boundary layer depth is typically deeper (1600 m) and more variable, and the vertical structure is usually decoupled. The offshore stratocumulus typically have strong mesoscale organization, much higher peak liquid water paths, extensive drizzle, and cloud droplet concentrations below 100 cm−3, sometimes with embedded pockets of open cells with lower droplet concentrations. The lack of drizzle near the coast is not just a microphysical response to high droplet concentrations; smaller cloud depth and liquid water path than further offshore appear comparably important. Moist boundary layer air is heated and mixed up along the Andean slopes, then advected out over the top of the boundary layer above adjacent coastal ocean regions. Well offshore, the lower free troposphere is typically much drier. This promotes strong cloud-top radiative cooling and stronger turbulence in the clouds offshore. In conjunction with a slightly cooler free troposphere, this may promote stronger entrainment that maintains the deeper boundary layer seen offshore. Winds from ECMWF and NCEP operational analyses have an rms difference of only 1 m s−1 from collocated airborne leg-mean observations in the boundary layer and 2 m s−1 above the boundary layer. This supports the use of trajectory analysis for interpreting REx observations. Two-day back-trajectories from the 20° S transect suggest that eastward of 75° W, boundary layer (and often free-tropospheric) air has usually been exposed to South American coastal aerosol sources, while at 85° W, neither boundary-layer or free-tropospheric air has typically had such contact.

Can Marine Cloud Brightening Reduce Sea-Surface Temperatures to Moderate Extreme Hurricanes and Typhoons?

2021 ◽  
Vol 6 (3) ◽  
Author(s):  
Salter SH ◽  
Keyword(s):  
Boundary Layer ◽  
Marine Boundary Layer ◽  
Sea Water ◽  
Cloud Condensation Nuclei ◽  
Sea Surface ◽  
Sea Surface Temperatures ◽  
Marine Stratocumulus ◽  
Surface Temperatures ◽  
Stratocumulus Clouds ◽  
Cloud Tops

Elevated sea-surface temperatures are a necessary but not sufficient requirement for the formation of hurricanes and typhoons. This paper suggests a way to exploit this. Twomey [1] showed that cloud reflectivity depends on the size-distribution of cloud drops, with a large number of small drops reflecting more than a smaller number of larger ones. Mid-ocean air is cleaner than over land. Latham [2-4] suggested that reflectivity of marine stratocumulus clouds could be increased by releasing a submicron spray of filtered sea water into the bottom of the marine boundary layer. The salt residues left after evaporation would be mixed by turbulence through the full depth of the marine boundary layer and would be ideal cloud condensation nuclei. Those that reached a height where the air had a super-saturation above 100% by enough to get over the peak of the Köhler curve would produce an increased number of cloud drops and so trigger the Twomey effect. The increase in reflection from cloud tops back out to space would cool sea-surface water. We are not trying to increase cloud cover; we just want to make existing cloud tops whiter. The spray could be produced by wind-driven vessels cruising chosen ocean regions. The engineering design of sea-going hardware is well advanced. This paper suggests a way to calculate spray quantities and the number and cost of spray vessels to achieve a hurricane reduction to a more acceptable intensity. It is intended to show the shape of a possible calculation with credible if not exact assumptions. Anyone with better assumptions should be able to follow the process.

scholarly journals Cloud droplets to drizzle: Contribution of transition drops to microphysical and optical properties of marine stratocumulus clouds

2017 ◽  
Vol 44 (15) ◽  
pp. 8002-8010 ◽  
Author(s):  
S. Glienke ◽  
A. Kostinski ◽  
J. Fugal ◽  
R. A. Shaw ◽  
S. Borrmann ◽  
...  
Keyword(s):  
Optical Properties ◽  
Cloud Droplets ◽  
Marine Stratocumulus ◽  
Stratocumulus Clouds

scholarly journals Wind speed response of marine non-precipitating stratocumulus clouds over a diurnal cycle in cloud-system resolving simulations

2016 ◽  
Vol 16 (9) ◽  
pp. 5811-5839 ◽  
Author(s):  
Jan Kazil ◽  
Graham Feingold ◽  
Takanobu Yamaguchi
Keyword(s):  
Boundary Layer ◽  
Wind Speed ◽  
Large Scale ◽  
Layer Growth ◽  
Radiative Properties ◽  
Cloud Base ◽  
Latent Heat Release ◽  
Marine Stratocumulus ◽  
Stratocumulus Clouds ◽  
Boundary Layer Growth

Abstract. Observed and projected trends in large-scale wind speed over the oceans prompt the question: how do marine stratocumulus clouds and their radiative properties respond to changes in large-scale wind speed? Wind speed drives the surface fluxes of sensible heat, moisture, and momentum and thereby acts on cloud liquid water path (LWP) and cloud radiative properties. We present an investigation of the dynamical response of non-precipitating, overcast marine stratocumulus clouds to different wind speeds over the course of a diurnal cycle, all else equal. In cloud-system resolving simulations, we find that higher wind speed leads to faster boundary layer growth and stronger entrainment. The dynamical driver is enhanced buoyant production of turbulence kinetic energy (TKE) from latent heat release in cloud updrafts. LWP is enhanced during the night and in the morning at higher wind speed, and more strongly suppressed later in the day. Wind speed hence accentuates the diurnal LWP cycle by expanding the morning–afternoon contrast. The higher LWP at higher wind speed does not, however, enhance cloud top cooling because in clouds with LWP ⪆ 50 g m−2, longwave emissions are insensitive to LWP. This leads to the general conclusion that in sufficiently thick stratocumulus clouds, additional boundary layer growth and entrainment due to a boundary layer moistening arises by stronger production of TKE from latent heat release in cloud updrafts, rather than from enhanced longwave cooling. We find that large-scale wind modulates boundary layer decoupling. At nighttime and at low wind speed during daytime, it enhances decoupling in part by faster boundary layer growth and stronger entrainment and in part because shear from large-scale wind in the sub-cloud layer hinders vertical moisture transport between the surface and cloud base. With increasing wind speed, however, in decoupled daytime conditions, shear-driven circulation due to large-scale wind takes over from buoyancy-driven circulation in transporting moisture from the surface to cloud base and thereby reduces decoupling and helps maintain LWP. The total (shortwave + longwave) cloud radiative effect (CRE) responds to changes in LWP and cloud fraction, and higher wind speed translates to a stronger diurnally averaged total CRE. However, the sensitivity of the diurnally averaged total CRE to wind speed decreases with increasing wind speed.

Sign in / Sign up

Export Citation Format

Share Document