scholarly journals An Evaluation of Successive Pilot Decontamination in Massive MIMO

2018 ◽  
Vol 39 (2) ◽  
pp. 107
Author(s):  
Victor Croisfelt Rodrigues ◽  
Taufik Abrão
Keyword(s):  
Spectral Efficiency ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Pilot Training ◽  
Pilot Contamination ◽  
Fundamental Issue ◽  
Data Rates ◽  
Multiple Input ◽  
Input Multiple Output

The demand for higher data rates can be satisfied by the spectral efficiency (SE) improvement offered by Massive multiple-input multiple-output (M-MIMO) systems. However, the pilot contamination remains as a fundamental issue to obtain the paramount SE in such systems. This propitiated the research of several methods to mitigate pilot contamination. One of these procedures is based on the coordination of the cells, culminating in proposals with multiple pilot training phases. This paper aims to expand the results of the original paper, whereby the concepts of large pilot training phases were offered. The evaluation of such method was conducted through more comprehensible numerical results, in which a large number of antennas were assumed and more rigorous SE expressions were used. The channel estimation approaches relying on multiple pilot training phases were considered cumbersome for implementation and an uninteresting solution to overcome pilot contamination; contradicting the results presented in the genuine paper.

scholarly journals A Low Complexity Channel Estimation and Detection for Massive MIMO Using SC-FDE

Telecom ◽  
2020 ◽  
Vol 1 (1) ◽  
pp. 3-17
Author(s):  
Mário Marques da Silva ◽  
Rui Dinis ◽  
João Guerreiro
Keyword(s):  
Channel Estimation ◽  
Spectral Efficiency ◽  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Data Detection ◽  
Pilot Symbols ◽  
Multiple Input ◽  
Input Multiple Output

5G Communications will support millimeter waves (mm-Wave), alongside the conventional centimeter waves, which will enable much higher throughputs and facilitate the employment of hundreds or thousands of antenna elements, commonly referred to as massive Multiple Input–Multiple Output (MIMO) systems. This article proposes and studies an efficient low complexity receiver that jointly performs channel estimation based on superimposed pilots, and data detection, optimized for massive MIMO (m-MIMO). Superimposed pilots suppress the overheads associated with channel estimation based on conventional pilot symbols, which tends to be more demanding in the case of m-MIMO, leading to a reduction in spectral efficiency. On the other hand, MIMO systems tend to be associated with an increase of complexity and increase of signal processing, with an exponential increase with the number of transmit and receive antennas. A reduction of complexity is obtained with the use of the two proposed algorithms. These algorithms reduce the complexity but present the disadvantage that they generate a certain level of interference. In this article, we consider an iterative receiver that performs the channel estimation using superimposed pilots and data detection, while mitigating the interference associated with the proposed algorithms, leading to a performance very close to that obtained with conventional pilots, but without the corresponding loss in the spectral efficiency.

PROBLEM STATEMENT OF JOINT ANTENNA SELECTION AND PRECODING IN MASSIVE MIMO COMMUNICATION SYSTEMS

2021 ◽  
Author(s):  
В.Б. КРЕЙНДЕЛИН ◽  
М.В. ГОЛУБЕВ
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Antenna Selection ◽  
Multiple Input Multiple Output ◽  
Research Areas ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Legal Restrictions ◽  
Multiple Transmission

Совместный с прекодингом автовыбор антенн на приемной и передающей стороне - одно из перспективных направлений исследований для реализации технологий Multiple Transmission and Reception Points (Multi-TRP, множество точек передачи и приема) в системах со многими передающими и приемными антеннами Massive MIMO (Multiple-Input-Multiple-Output), которые активно развиваются в стандарте 5G. Проанализированы законодательные ограничения, влияющие на применимость технологий Massive MIMO, и специфика реализации разрабатываемого алгоритма в миллиметровомдиапа -зоне длин волн. Рассмотрены алгоритмы формирования матриц автовыбора антенн как на передающей, так и на приемной стороне. Сформулирована строгая математическая постановка задачи для двух критериев работы алгоритма: максимизация взаимной информации и минимизация среднеквадратичной ошибки. Joint precoding and antenna selection both on transmitter and receiver sides is one of the promising research areas for evolving toward the Multiple Transmission and Reception Points (Multi-TRP) concept in Massive MIMO systems. This technology is under active development in the coming 5G 3GPP releases. We analyze legal restrictions for the implementation of 5G Massive MIMO technologies in Russia and the specifics of the implementation of the developed algorithm in the millimeter wavelength range. Algorithms of antenna auto-selection matrices formation on both transmitting and receiving sides are considered. Two criteria are used for joint antenna selection and precoding: maximizing mutual information and minimizing mean square error.

scholarly journals An improvement to hybrid beamforming precoding scheme for mmWave massive MIMO systems based on channel matrix

2021 ◽  
Vol 23 (1) ◽  
pp. 285
Author(s):  
Zahra Amirifar ◽  
Jamshid Abouei
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Wireless Systems ◽  
Achievable Rate ◽  
Percentage Difference ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Hybrid Beamforming ◽  
Mimo Technology

<p>The massive multiple-input multiple-output (MIMO) technology has been applied innew generation wireless systems due to growing demand for reliability and high datarate. Hybrid beamforming architectures in both receiver and transmitter, includinganalog and digital precoders, play a significant role in 5G communication networksand have recently attracted a lot of attention. In this paper, we propose a simple andeffective beamforming precoder approach for mmWave massive MIMO systems. Wefirst solve an optimization problem by a simplification subject, and in the second step,we use the covariance channel matrixfCk=Cov(Hk)andBk=HkHHkinstead of chan-nel matrixHk. Simulation results verify that the proposed scheme can enjoy a highersum rate and energy efficiency than previous methods such as spatially sparse method,analog method, and conventional hybrid method even with inaccurate Channel StateInformation (CSI). Percentage difference of the achievable rate ofCk=Cov(Hk)andBk=HkHHkschemes compared to conventional methods are 2.51% and 48.94%, re-spectively.</p>

scholarly journals Spectral Efficiency Improvement Techniques In Massive Mimo For 5G Communications

2021 ◽  
Vol 12 (2) ◽  
pp. 1457-1465
Author(s):  
Naraiah R , Et. al.
Keyword(s):  
Spectral Efficiency ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Broad Band ◽  
Cell System ◽  
Base Station ◽  
Information Rate ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Long Time

Wireless communications has gotten one of the quickest developing zones in our advanced life and makes colossal effect on practically every component of our day by day life. 5G should support a large number of new applications with a wide assortment of prerequisites, including higher pinnacle and client information rates, diminished dormancy, improved indoor inclusion, expanded number of gadgets, etc. The normal traffic development in at least a long time from now can be fulfilled by the consolidated utilization of more range, higher spectral efficiency, and densification of cells. The increment in spectral effectiveness will improve the throughput of the system which straightforwardly serves the Enhanced Mobile Broad band use instance of the 5G assistance. In massive Multiple-Input Multiple-Output (M-MIMO) systems few hundred quantities of antennas are conveyed at each base station (BS) to serve a moderately modest number of single-reception apparatus terminals with multiuser, giving higher information rate and lower idleness. Massive Multiple-Input Multiple-Output is the arising innovation in cell system for higher information rate correspondence. It utilizes enormous number of communicating reception apparatus at the base station which is made conceivable by the radio wire cluster which can be electronically steerable and adequately utilized for shaft framing. Spectral proficiency is the vital boundary to be improved in expanding throughput. The system execution under different commonsense limitations and conditions, for example, restricted soundness block length, number of base station (BS) antennas, and number of dynamic clients are assessed through simulation.  

scholarly journals An Efficient Precoding Scheme for Millimeter-Wave Massive MIMO Systems

Electronics ◽  
2019 ◽  
Vol 8 (9) ◽  
pp. 927 ◽  
Author(s):  
Alemaishat ◽  
Saraereh ◽  
Khan ◽  
Affes ◽  
Li ◽  
...  
Keyword(s):  
Computational Complexity ◽  
Millimeter Wave ◽  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Beam Control ◽  
Low Computational Complexity ◽  
Multiple Input ◽  
Input Multiple Output

Aiming at the problem of high computational complexity due to a large number of antennas deployed in mmWave massive multiple-input multiple-output (MIMO) communication systems, this paper proposes an efficient algorithm for optimizing beam control vectors with low computational complexity based on codebooks for millimeter-wave massive MIMO systems with split sub-arrays hybrid beamforming architecture. A bidirectional method is adopted on the beam control vector of each antenna sub-array both at the transmitter and receiver, which utilizes the idea of interference alignment (IA) and alternating optimization. The simulation results show that the proposed algorithm has low computational complexity, fast convergence, and improved spectral efficiency as compared with the state-of-the-art algorithms.

Adaptive MIMO Systems with High Spectral Efficiency

2009 ◽  
pp. 286-307 ◽  
Author(s):  
Zhendong Zhou ◽  
Branka Vucetic
Keyword(s):  
Spectral Efficiency ◽  
Adaptive System ◽  
Mimo Systems ◽  
Mimo System ◽  
Adaptive Modulation ◽  
Multiple Input Multiple Output ◽  
Adaptive Modulation And Coding ◽  
Multiple Input ◽  
High Spectral Efficiency ◽  
Input Multiple Output

This chapter introduces the adaptive modulation and coding (AMC) as a practical means of approaching the high spectral efficiency theoretically promised by multiple-input multiple-output (MIMO) systems. It investigates the AMC MIMO systems in a generic framework and gives a quantitative analysis of the multiplexing gain of these systems. The effects of imperfect channel state information (CSI) on the AMC MIMO systems are pointed out. In the context of imperfect CSI, a design of robust near-capacity AMC MIMO system is proposed and its good performance is verified by simulation results. The proposed adaptive system is compared with the non-adaptive MIMO system, which shows the adaptive system approaches the channel capacity closer.

scholarly journals Efficient Pilot Decontamination Schemes in 5G Massive MIMO Systems

Electronics ◽  
2019 ◽  
Vol 8 (1) ◽  
pp. 55 ◽  
Author(s):  
Omar A. Saraereh ◽  
Imran Khan ◽  
Byung Moo Lee ◽  
Ashraf Tahat
Keyword(s):  
Massive Mimo ◽  
Communication Systems ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Path Loss ◽  
Achievable Rate ◽  
Pilot Contamination ◽  
User Grouping ◽  
Channel Conditions ◽  
Input Multiple Output

Massive Multiple-input Multiple-output (MIMO) is an emerging technology for the 5G wireless communication systems which has the potential to provide high spectral efficient and improved link reliability and accommodate large number of users. Aiming at the problem of pilot contamination in massive MIMO systems, this paper proposes two algorithms to mitigate it. The first algorithm is depending on the idea of Path Loss to perform User Grouping (PLUG) which divide the users into the center and edge user groups depending on different levels of pilot contamination. It assigns the same pilot sequences to the center users which slightly suffer from pilot contamination and assign orthogonal pilot sequences to the edge users which severely suffer from pilot contamination. It is assumed that the number of users at the edge of each cell is the same. Therefore, to overcome such limitations of PLUG algorithm, we propose an improved PLUG (IPLUG) algorithm which provides the decision parameters for user grouping and selects the number of central and edge users in each cell in a dynamic manner. Thus, the algorithm prevents the wrong division of users in good channel conditions being considered as an edge user which causes large pilot overhead, and also identifies the users with worst channel conditions and prevents the wrong division of such users from the center user group. The second algorithm for pilot decontamination utilizes the idea of pseudo-random codes in which orthogonal pilot are assigned to different cells. Such codes are deployed to get a transmission pilot by scrambling the user pilot in the cell. Since the pilot contamination is generated because different cells multiplex the same set of orthogonal pilots and the pseudo-random sequences have good cross-correlation characteristics, this paper uses this feature to improve the orthogonality of pilots between different cells. Simulation results show that the proposed algorithms can effectively improve channel estimation performance and achievable rate as compared with other schemes.

scholarly journals Pilot Decontamination Using Asynchronous Fractional Pilot Scheduling in Massive MIMO Systems

Sensors ◽  
2020 ◽  
Vol 20 (21) ◽  
pp. 6213
Author(s):  
Muhammad Irshad Zahoor ◽  
Zheng Dou ◽  
Syed Bilal Hussain Shah ◽  
Imran Ullah Khan ◽  
Sikander Ayub ◽  
...  
Keyword(s):  
Massive Mimo ◽  
Mimo Systems ◽  
Mimo System ◽  
Multiple Input Multiple Output ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Ideal Number ◽  
Sum Rate ◽  
Inter Cell Interference ◽  
Time Division

Due to large spectral efficiency and low power consumption, the Massive Multiple-Input-Multiple-Output (MIMO) became a promising technology for the 5G system. However, pilot contamination (PC) limits the performance of massive MIMO systems. Therefore, two pilot scheduling schemes (i.e., Fractional Pilot Reuse (FPR) and asynchronous fractional pilot scheduling scheme (AFPS)) are proposed, which significantly mitigated the PC in the uplink time division duplex (TDD) massive MIMO system. In the FPR scheme, all the users are distributed into the central cell and edge cell users depending upon their signal to interference plus noise ratio (SINR). Further, the capacity of central and edge users is derived in terms of sum-rate, and the ideal number of the pilot is calculated which significantly maximized the sum rate. In the proposed AFPS scheme, the users are grouped into central users and edge users depending upon the interference they receive. The central users are assigned the same set of pilots because these users are less affected by interference, while the edge users are assigned the orthogonal pilots because these users are severely affected by interference. Consequently, the pilot overhead is reduced and inter-cell interference (ICI) is minimized. Further, results verify that the proposed schemes outperform the previous proposed traditional schemes, in terms of improved sum rates.

scholarly journals Massive Mimo and Beamforming Techniques of 5G Networks

2019 ◽  
Vol 9 (1S5) ◽  
pp. 139-142
Keyword(s):  
Millimeter Wave ◽  
Spectral Efficiency ◽  
Beam Steering ◽  
Multiple Input Multiple Output ◽  
Wave Band ◽  
Data Rates ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Millimeter Wave Band ◽  
Mimo Technology

The need of wireless communication is increasing day to day life and it is mostly depends on spectral efficiency and bandwidth. The current operating wireless technologies are ranging between 300MHz to 3GHz band; consequently the 5G wireless network depends up on high frequency millimeter wave band ranging between 3GHz to 300GHz. The spectral efficiency can be improved by using Massive Multiple Input Multiple Output (MIMO) Technology. In this paper we are discussing MIMO along with some emerging technologies are present in 5G, they are Millimeter Wave, Beam Forming, and Beam Steering. By using these technologies the capacity is increased, higher data rates will be obtained, latency can be reduced and enhanced quality of service will occur.

scholarly journals Massive MIMO, mmWave and mmWave-Massive MIMO Communications: Performance Assessment with Beamforming Techniques

2020 ◽  
Author(s):  
Tewelgn Kebede Engda ◽  
Yihenew Wondie ◽  
Johannes Steinbrunn
Keyword(s):  
Mobile Networks ◽  
Massive Mimo ◽  
Performance Metrics ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Low Complexity ◽  
Fifth Generation ◽  
Emerging Trends ◽  
Multiple Input ◽  
Input Multiple Output

Abstract A considerable amount of enabling technologies are being explored in the era of fifth generation (5G) mobile system. The dream is to build a wireless network that substantially improves the existing mobile networks in all performance metrics. To address this 5G design targets, massive MIMO (multiple input multiple output) and mmWave (millimeter wave) communication are also candidate technologies. Luckily, in many respects these two technologies share a symbiotic integration. Accordingly, a logical step is to integrate mmWave communications and massive MIMO to form mmWave-massive MIMO which substantially increases user throughput, improve spectral and energy efficiencies, increase the capacity of mobile networks and achieve high multiplexing gains. Thus, this work analyses the concepts, performances, comparison and discussion of these technologies called: massive MIMO, mmWave Communications and mmWave-massive MIMO systems jointly. Besides, outcomes of extensive researches, emerging trends together with their respective benefits, challenges, proposed solutions and their comparative analysis is addressed. The performance of hybrid analog-digital beamforming architecture with a fully digital and analog beamforming techniques are also analyzed. Analytical and simulation results show that the low-complexity hybrid analog-digital precoding achieves all round comparable precoding gains for mmWave-Massive MIMO technology.

Sign in / Sign up

Export Citation Format

Share Document