scholarly journals DISSIPATION OF WAVE ENERGY DUE TO OPPOSING CURRENT

1972 ◽  
Vol 1 (13) ◽  
pp. 30
Author(s):  
Toshio Iwasaki ◽  
Michio Sato
Keyword(s):  
Energy Dissipation ◽  
Surface Waves ◽  
Wave Height ◽  
Wave Energy ◽  
Uniform Flow ◽  
Shear Stresses ◽  
Flow Energy ◽  
Boundary Shear ◽  
Wave Height Attenuation

Energy dissipation and wave height attenuation were analysed theoretically for surface waves propagating against uniform flow. Energy dissipation was estimated from evaluation of work "by internal and boundary shear stresses. Experiments were conducted in a test flume of 20m long, 0.8m wide and 0.5m high. Results showed that tested values of rate of wave height attenuation were comparable with theoretical values.

scholarly journals Wave energy dissipation in the mangrove vegetation off Mumbai, India

2018 ◽  
Author(s):  
Samiksha S. Volvaiker ◽  
Ponnumony Vethamony ◽  
Prasad K. Bhaskaran ◽  
Premanand Pednekar ◽  
Mhamsa Jishad ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Drag Coefficient ◽  
Wave Height ◽  
Wave Energy ◽  
Coastal Region ◽  
Measured Data ◽  
Vegetation Density ◽  
Mangrove Vegetation ◽  
Wave Height Attenuation ◽  
Set Up

Abstract. Coastal regions of India are prone to sea level rise, cyclones, storm surges and human induced activities, resulting in flood, erosion and inundation. The primary aim of the study is to estimate wave energy attenuation by mangrove vegetation using SWAN model, and validate the model results with measurements for the Mumbai coastal region. Wave measurements were carried out during 5–8 August 2015 at 3 locations in a transect normal to the coast using surface mounted pressure level sensors in spring tide conditions. The measured data presents wave height attenuation of the order of 52 %. The study shows a linear relationship between wave height attenuation and gradual changes in water level in the nearshore region, in phase with the tides. Model set-up and sensitivity analyses were conducted to understand the model performance to vegetation parameters. It was observed that wave attenuation increases with an increase in drag coefficient, vegetation density and stem diameter. For a typical set-up for Mumbai coastal region having vegetation density of 0.175 per m2, stem diameter of 0.3 m and drag coefficient varying from 0.4 to 1.5, the model reproduced attenuation, ranging from 49 to 55 %, which matches well with the measured data. Spectral analysis performed for the cases with and without vegetation very clearly portrays energy dissipation in the vegetation area. This study has the potential of improving the quality of wave prediction in vegetation areas, especially during monsoon season and extreme weather events.

scholarly journals Wave energy dissipation in the mangrove vegetation off Mumbai, India

2017 ◽  
Author(s):  
Samiksha S. Volvaiker ◽  
Ponnumony Vethamony ◽  
Prasad K. Bhaskaran ◽  
Premanand Pednekar ◽  
MHamsa Jishad ◽  
...  
Keyword(s):  
Energy Dissipation ◽  
Drag Coefficient ◽  
Wave Height ◽  
Wave Attenuation ◽  
Coastal Region ◽  
Measured Data ◽  
Vegetation Density ◽  
Mangrove Vegetation ◽  
Wave Height Attenuation ◽  
Set Up

Abstract. Coastal regions of India are prone to sea level rise, cyclones, storm surges and human induced activities, resulting in flood, erosion, and inundation. The primary aim of the study is to estimate wave attenuation by mangrove vegetation using SWAN model in standalone mode, as well as SWAN nested with WW3 model for the Mumbai coastal region. To substantiate the model results, wave measurements were carried out during 5–8 August 2015 at 3 locations in a transect normal to the coast using surface mounted pressure level sensors under spring tide conditions. The measured data presents wave height attenuation of the order of 52 %. The study shows a linear relationship between wave height attenuation and gradual changes in water level in the nearshore region, in phase with the tides. Model set-up and sensitivity analyses were conducted to understand the model performance to vegetation parameters. It was observed that wave attenuation increased with an increase in drag coefficient (Cd), vegetation density, and stem diameter. For a typical set-up for Mumbai coastal region having vegetation density of 0.175 per m2, stem diameter of 0.3 m and drag coefficient varying from 0.4 to 1.5, the model reproduced attenuation, ranging from 49 to 55 %, which matches well with the measured data. Spectral analysis performed for the cases with and without vegetation very clearly portrays energy dissipation in the vegetation area as well as spectral changes. This study has the potential of improving the quality of wave prediction in vegetation areas, especially during monsoon season and extreme weather events.

scholarly journals ENERGY LOSSES UNDER WAVE ACTION

1970 ◽  
Vol 1 (12) ◽  
pp. 16 ◽  
Author(s):  
P.D. Treloar ◽  
A. Brebner
Keyword(s):  
Boundary Layer ◽  
Energy Dissipation ◽  
Wave Height ◽  
Dissipation Function ◽  
Wave Action ◽  
Energy Losses ◽  
Boundary Layer Equations ◽  
Wave Height Attenuation ◽  
Prandtl Boundary Layer ◽  
Made In

Wave-height attenuation measurements were made in two identical flumes of different widths and the results used to separate bottom energy losses from sidewall energy losses These energy losses, in the form of rates of energy dissipation, were then compared with their theoretical values as calculated by solving the linearized Prandtl boundary layer equations and evaluating the Rayleigh dissipation function Using these results, an adjusted formula for the wave-height attenuation modulus was determined.

Wave Height Variation Across Surf Zone of Bar Type Profile

2009 ◽  
Author(s):  
Tai-Wen Hsu ◽  
Kun-Sian Lai
Keyword(s):  
Energy Dissipation ◽  
Wave Height ◽  
Analytical Solutions ◽  
Wave Energy ◽  
Hydraulic Jump ◽  
Surf Zone ◽  
Wave Transformation ◽  
Height Variation ◽  
Wave Energy Dissipation ◽  
Theoretical Results

Analytical solutions for wave height decay due to shoaling and breaking on a bar type profile are presented. A macroscopic analogy between an idealized surf zone and a hydraulic jump are incorporated in the theory to account for wave transformation and energy dissipation in the surf zone. The theoretical results are fairly compared with laboratory observations. Key parameters that influence wave energy dissipation in the surf zone are investigated.

scholarly journals Analytical solution of non-uniform flow in compound channel

2018 ◽  
Vol 40 ◽  
pp. 06041 ◽  
Author(s):  
Kamalini Devi ◽  
Bhabani S. Das ◽  
Jnana R. Khuntia ◽  
Kishanjit K. Khatua
Keyword(s):  
Analytical Solution ◽  
Flow Behavior ◽  
Uniform Flow ◽  
Shear Stresses ◽  
Data Sets ◽  
Compound Channels ◽  
Effective Stresses ◽  
Boundary Shear ◽  
Flow Variables ◽  
Boundary Shear Stress

The present work investigates the analysis of depth-averaged velocity and boundary shear stress distribution in compound channels with non-uniform flow condition. A quasi two-dimensional model is proposed to assess the flow variables by accounting the physical processes that are specific to non-uniform flow. For analyzing the flow behavior, experimental data sets concerning compound channels with narrowing and enlarging floodplains of previous investigators are considered. The model accounts the influence of momentum transfer on the flow variables through additional shear stresses that are developed in non-uniform flow. Three types of effective stresses produced by molecular viscosity, turbulent and dispersion on the vertical planes are discussed. An analytical solution to the model is presented. Terms associated with the effective stresses are investigated relating them to the geometric and hydraulic parameters. The significance of lateral variation of energy slope is further investigated. For both homogenous and heterogeneous non-prismatic channels, the approach is examined to predict the flow variables with reasonable accuracy.

scholarly journals A NUMERICAL MODEL OF WAVE DEFORMATION IN SURF ZONE

1988 ◽  
Vol 1 (21) ◽  
pp. 41 ◽  
Author(s):  
Akira Watanabe ◽  
Mohammad Dibajnia
Keyword(s):  
Energy Dissipation ◽  
Numerical Model ◽  
Potential Energy ◽  
Wave Height ◽  
Wave Energy ◽  
Surf Zone ◽  
Time Dependent ◽  
Wave Energy Dissipation ◽  
Wave Deformation

A numerical model is presented for nearshore wave deformation due to shoaling and breaking, and to decay and recovery in the surf zone. The model is based on a set of time-dependent mild slope equations including a term of wave energy dissipation caused by breaking. Its applicability is demonstrated by comparisons between the computations and the measurements of cross-shore distributions of the wave height and potential energy over typical beach configurations.

UNDERWATER BARRED BEACH PROFILE TRANSFORMATION UNDER DIFFERENT WAVES CONDITIONS

2017 ◽  
Author(s):  
Olga Kuznetsova ◽  
Olga Kuznetsova ◽  
Yana Saprykina ◽  
Yana Saprykina ◽  
Boris Divinsky ◽  
...  
Keyword(s):  
Numerical Modelling ◽  
Coastal Zone ◽  
Wave Height ◽  
Wave Energy ◽  
Wave Period ◽  
Beach Profile ◽  
Infragravity Waves ◽  
Wave Parameters ◽  
Mean Wave Period

Based on numerical modelling evolution of beach under waves with height 1,0-1,5 m and period 7,5 and 10,6 sec as well as spectral wave parameters varying cross-shore analysed. The beach reformation of coastal zone relief is spatially uneven. It is established that upper part of underwater beach profile become terraced and width of the terrace is in direct pro-portion to wave height and period on the seaward boundary but inversely to angle of wave energy spreading. In addition it was ascertain that the greatest transfiguration of profile was accompanied by existence of bound infragravity waves, smaller part of its energy and shorter mean wave period as well as more significant roller energy.

Sign in / Sign up

Export Citation Format

Share Document