Comfortable pressure feeling and clothing pressure on abdomen

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Tamaki Mitsuno ◽  
Ayaka Kai Yanagisawa

PurposeThe present study obtained the topography of perceptible (a perfect-fit feeling) clothing pressures from the chest to groin, when a stretching material provided hoop tension to the body surface of participants. Furthermore, the allowable pressure level was examined for the abdomen, which is pressed by underclothes on a daily basis.Design/methodology/approachParticipants were nine women aged 21.3 ± 1.2 years. Each participant's perception of pressure while wearing the experimental band was obtained in a questionnaire using a visual analog scale. Clothing pressure was measured employing a hydrostatic pressure-balancing method as participants adjusted the band length themselves to achieve two conditions: a perfect-fit and tight-fit on the abdomen.FindingsThe range of comfortable clothing pressure tightening provided by a 2.5 cm-wide elastic band on the abdomen was 0–5.6 hPa for under the bust, waist and groin, and 4.4–9.3 hPa for the chest, lower waist and hips. A nerve plexus of the autonomic nervous system and arteries are distributed over the body surface of the former body parts, which were thus sensitive to tightening around the abdomen.Originality/valueThe topography of perceptible clothing pressure was obtained when stretching material provided hoop tension to the body surface of the participant. The results of a participant questionnaire agreed with clothing pressure obtained using a hydrostatic pressure-balancing method that has a short-time constant and sensitive resolution. Furthermore, allowable pressure levels were proposed.

2020 ◽  
Vol 36 (8) ◽  
pp. 29-31

Purpose Reviews the latest management developments across the globe and pinpoints practical implications from cutting-edge research and case studies. Design/methodology/approach This briefing is prepared by an independent writer who adds their own impartial comments and places the articles in context. Findings The problem with developing a reputation of being something of an oracle in the business world is that all of a sudden, everyone expects you to pull off the trick of interpreting the future on a daily basis. Like a freak show circus act or one-hit wonder pop singer, people expect you to perform when they see you, and they expect you to perform the thing that made you famous, even if it is the one thing in the world you don’t want to do. And when you fail to deliver on these heightened expectations, you are dismissed as a one trick pony, however good that trick is in the first place. Originality/value The briefing saves busy executives and researchers hours of reading time by selecting only the very best, most pertinent information and presenting it in a condensed and easy-to-digest format.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Kochu Therisa Karingada ◽  
Michael Sony

PurposeThe COVID-19 pandemic lockdown has caught many educational institutions by surprise and warranted an abrupt migration from offline to online learning. This has resulted in an education change, without any time for due consideration, as regards its impact on musculoskeletal disorders (MSD) on students. The purpose of this study is to investigate MSD related to online learning during the COVID-19 pandemic lockdown.Design/methodology/approachA cross-sectional study was conducted on undergraduate students in India. In total, 261 students participated in this online survey.FindingsThe study finds that around 80% of students have reported some symptom in the head, neck and eyes since they started online learning. In total, 58% have reported MSD symptom in the right shoulder and 56% in the right hand fingers. Besides, more than 40 % of students experienced some MSD symptoms, in almost all the body parts studied, due to online learning. Correlation analysis is conducted between time spent on online learning per day and MSD symptoms.Originality/valueThis is the first study conducted on MSD and online learning during COVID-19 pandemic.


2018 ◽  
Vol 89 (11) ◽  
pp. 2187-2198 ◽  
Author(s):  
Tamaki Mitsuno ◽  
Ayaka Kai

A system for measuring clothing pressure employing a renewed hydrostatic pressure-balancing method was examined using three calibration methods. All methods revealed an almost perfectly linear Y = X relation for the pressure load (X) and the reading of the system (Y). In the application, the distributions of elastic band pressure were examined on 21 planes from head to foot. The preferred elastic band pressures of the leg and arm were significantly higher than those of the neck and abdomen. These results are due to the large presence of the autonomic nervous system at the surfaces of the neck and abdomen. In the area of the abdomen, the preferred elastic band pressure was higher from the mammilla to the shoulder than for the anteroposterior midlines. The development of compression ware must consider appropriate tightening for each body part.


2019 ◽  
Vol 47 (1) ◽  
pp. 37-47 ◽  
Author(s):  
Heather Moorefield-Lang

Purpose What happens when a librarian outgrows their maker learning location or transfers to a new library? The purpose of this study is to explore the planning process for second and/or new library makerspaces. Is the planning more intentional? Is there more focus on how the makerspace should be put together for the community served? Is the community further involved? This study will explore those questions and more. Design/methodology/approach Using content analysis, the perspectives of practicing librarians in the achievement of subsequent makerspaces are examined. Data include librarian interviews, an analysis using NVivo 11 through the lens of design thinking, and a final review using member checking by each research participant. Findings Makerspaces continue to grow in popularity in school and public/community libraries. What is unexplored is the moving from a first makerspace to the implementation of a second and/or new maker learning location. More intentional planning is involved. The community served by the library is further engaged in the planning. Study results illustrate the value that community insight and intentional planning play in the design and implementation of makerspaces. Originality/value Makerspaces in libraries continue to grow in popularity; in turn, the body of peer-reviewed, scholarly publications also continues to grow. Librarians in the field are beginning to move from their first to second makerspaces. This study investigates those perspectives. Much can be gained from the experiences of those who have implemented their second or third makerspace.


2020 ◽  
Vol 15 (3) ◽  
pp. 411-430
Author(s):  
Agnieszka Kurczewska ◽  
Michał Mackiewicz

PurposeThe purpose of this paper is to identify human capital factors that pertain both to setting up and successfully running a business. To achieve this objective, the authors apply and extend the theory of career choice offered by Lazear (2005) that explains individual selection into entrepreneurship.Design/methodology/approachThe authors hypothesise that individuals with broader educational and professional backgrounds are more likely to start a business and are more likely to run a business in the long term. The authors tested the hypotheses using unique data from 800 current entrepreneurs, 800 employees who were previously entrepreneurs and 842 employees with no entrepreneurial experience, by means of a logit regression with robust standard errors and extensive robustness checks.FindingsThe authors empirically show that individuals with more diverse educational and professional backgrounds tend to have both greater chances of starting a company, as well as a higher probability of entrepreneurial success. Surprisingly, having managerial experience proved to exert a negative influence on the likelihood of starting a business while having an insignificant impact on the odds of entrepreneurial success.Research limitations/implicationsThe findings are informative for those planning or pursuing an entrepreneurial career, but they are also relevant for the purpose of entrepreneurship education.Originality/valueThe author's extend the body of research supporting Lazear's (2005) theory by showing that broad education and professional experience not only contribute to a higher propensity to start a company but they are also success factors in business per se.


2018 ◽  
Author(s):  
Jianyu Li ◽  
Mengzhu Shi ◽  
Yuechao He ◽  
Jianwei Fu ◽  
Lizhen Zheng

Background. Phyllotreta striolata is a worldwide pest that harms cruciferous vegetables. The use of pathogenic microorganisms to control pests is an important means of biological control. Using pathogenic microorganisms to prevent and control P. striolata has rarely been reported. Methods. In this study, the infection process of a Metarhizium strain highly pathogenic to P. striolata was observed by stereomicroscopyand scanning electron microscopy (SEM). Results.The results showed that the attachment of Metarhizium strain Ma6 to the body surface varied; the conidia distribution was greatest in the tibia of the posterior leg with thick bristles and in the intersegmental abdominal membrane, and the spore distribution occurred least in the smooth and hard portions of the insect’s body. At the start of the infection, Metarhizium strain Ma6 generally grew from the body parts with gaps or connecting spaces such as mouthparts and the thoracic leg base and joints, then the spores germinated with germ tubes and penetration peg, and the penetration peg penetrated the body surface. Ten days after inoculation, the mycelia divided into conidia, and many mycelia and spores covered the entire adult insect’s body. Discussion. Spore germination occurred on the 5th day after inoculation, and many hyphae and spores covered the entire adult insect body within 10 days after inoculation. And the invasion into tissue gaps from the weaker areas is more efficient than intruding from the body hard surface. This may be the reason for the Metarhizium strain Ma6’s high virulence. This study preliminarily clarified the infection ability and invasion approach of a Metarhizium strain against P. striolata, providing evidence for evaluating the strain’s insecticidal effect and application prospect.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Natasja Steenkamp ◽  
Roslyn Roberts

Purpose This paper aims to explore how advanced integrated report preparers internalise and operationalise material value creation information to manage the generation of such information for the integrated report. Design/methodology/approach The paper adopts a qualitative approach using in-depth semi-structured interviews to examine how information about material value creation matters in six South African organisations are managed. Findings The findings will be useful to integrated reporting adopters as to how they might implement appropriate processes and systems to determine, communicate, collect and process information about matters that substantively affect their value creation. Originality/value The paper contributes to the body of knowledge by providing insight on how material value creation matters are determined, communicated internally and information about such matters generated.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Muhammad Farhan Jahangir Chughtai ◽  
Saira Tanweer ◽  
Samreen Ahsan ◽  
Tariq Mehmood ◽  
Atif Liaqat ◽  
...  

Purpose Corona viruses have spiked structure and enveloped glycoproteins in their structure, along with specific proteins in membranes. The mode of action of COVID-19 consists of three phases, i.e. viral replication, immune hyperactivity and pulmonary destruction. However, angiotensin-converting enzyme is an essential receptor that causes COVID-19. After infecting any individual, COVID-19 develops in specific pattern with the following stages: replication stage and adaptive immunity stage. After adaptive immunity stage, the clinical symptoms of patient include cough, fever, runny nose, shortness of breath and many more. To cope with this COVID-19, food and nutrition played an important role. The purpose of this review article is to emphasize the significance of food and immunity to reduce COVID-19 attack among susceptibles. Design/methodology/approach In the present era, corona virus, a member of crown-shaped type, created a pandemic situation around the globe owing to its capability to move from human to animals and vice versa. This virus can transfer its 35% infection to the individuals. Contemporarily, this outbreak was observed in Wuhan, China in December 2019 and affected a huge number of communities by spreading like common flu. However, after investigation, it was revealed that COVID-19 is different from common flu regarding respiratory illness created by this novel coronavirus along with its taxonomy. Findings Over and above to all the aforementioned food safety concerns, it is suggested to use sufficient supply of green leafy vegetables along with fiber-rich foods such as legumes, beans, whole grains and vegetables. It is further good for health to get all these varieties whole and organic. The individuals should use probiotics (lactobacillus) on daily basis as a source of diary probiotic that can further bind to the virus directly and then can inhibit the viral attachment with body cells; also the probiotics are claimed to enhance the immune system of the body. Research limitations/implications In the case of fruits and vegetables purchased, it must be thoroughly washed with water and then disinfected; after pat drying, these fruits and vegetables can be moved to the refrigerator and stored along with other foods. During the outbreak of COVID-19, the partially cooked or ready-to-eat foods should be avoided, especially eggs, meat, meat products, milk and milk-related products. On the other side, nuts should not be consumed; if required, then it must be properly roasted at home before consumption. Practical implications The baked product right after coming out of oven is completely safe; however, these are contaminated during handling such as crumb in case of bread and with knives; so in the breakout of any viral attack, the individuals should avoid slicing of the bread. Moreover, it is recommended to place the baked products in personal bags instead of bulk quantity. Before the consumption, the baked products should be toasted, microwaved or heated with the help of pan (traditional) to reduce the amount of viral load. Social implications Dietary supplements are taken by most of the people on daily basis or sporadically especially when they are suffering from inflammation or cold. They have options while selecting these types of supplements such as probiotics, Echinacea, omega-3 fatty acids, vitamins D and E, calcium glucosamine, garlic and iron. These supplements are beneficial for the group of population who do not eat diversity of food as sufficient amount of essential nutrients is provided through this pathway. Originality/value This work is original in its novelty.


2020 ◽  
Vol 33 (5) ◽  
pp. 737-751
Author(s):  
Alison Horstmeyer

PurposeThis paper examines the role of curiosity in volatile, uncertain, complex and ambiguous (VUCA) work contexts.Design/methodology/approachThis conceptual article relied upon an examination of literature about curiosity, VUCA and soft skills.FindingsCuriosity, when encouraged and supported within the workforce, may aid organizations in closing soft skill gaps and better navigating ambiguity, perpetually changing business landscapes, and rapidly advancing technology.Research limitations/implicationsEmpirical research is needed to validate, confirm and further explicate the specific mechanisms and value of curiosity within VUCA environments.Practical implicationsOrganizations need to move beyond espousing a value of curiosity to deliberately and effectively cultivating and supporting it within their employees.Originality/valueAlthough ample research and literature has examined curiosity, soft skills and VUCA environments independently, the body of literature on the specific role of curiosity in such environments is limited.


2020 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Shasha Wang ◽  
Arnold Japutra ◽  
Sebastián Molinillo

Purpose The purpose of this paper is to test the influence of branded premiums or branded free gifts (e.g. a free of charge suitcase of a well-recognised brand) on tourism destination promotion. Specifically, the impact of brand name and price value of a branded premium on promoting a tourism destination was examined. Design/methodology/approach This research uses two experiment-based studies, applying a between-group experimental design. Findings The results revealed that appreciation leads to intention to visit the promoted destination when the branded promotion is offered. When a destination promotional offer contains a branded premium, consumers respond more favourably to the brand name of the premium than the price value of the premium. This finding applies to consumers’ responses to both the destination and the premium. Research limitations/implications This research adds to the body of knowledge on tourism destination promotion and the branding literature, specifically with promotional and branded premiums. Practical implications Mutual benefits can be obtained by both tourism destination marketers and premium marketers. Originality/value This research highlights the importance of branded premiums in tourism destination promotional offers. This research also shows the influence of the price value of a premium’s brand name in a tourism destination promotional offer.


Sign in / Sign up

Export Citation Format

Share Document