Hydrogen-Assisted Thermocatalysis over Titanium Nanotube for Oxidative Desulfurization

Titanium nanotubes were hydrothermally synthesized via a two-step method for ODS (oxidative desulfurization). The catalysts’ structures were characterized by XRD (X-ray diffraction), FT-IR, UV-Vis (UV-Vis diffuse reflectance spectra), NH3-TPD, etc. The effects of O/S molar ratio and catalyst dosage, etc., were systematically investigated. The catalyst exhibited remarkable performance, so that the removal of DBT (dibenzothiophene) was nearly 100% under the optimal conditions in 10 min. Also, the catalysts could be easily reused for six consecutive cycles. The hydrogen-assisted thermocatalytic mechanism over titanium nanotubes for ODS was also studied and an effective reactant concentration (ERC) number of 70.8 was calculated.

Effects of rotation errors on goniometric measurements

Goniometric measurements are essential for the determination of many optical quantities, and quantifying the effects of errors in the rotation axes on these quantities is a complex task. In this paper, we show how a measurement model for a four-axis goniometric system can be developed to allow the effects of alignment and rotation errors to be included in the uncertainty of the measurement. We use three different computational methods to propagate the uncertainties due to several error sources through the model to the rotation angles and then to the measurement of bidirectional reflectance and integrated diffuse reflectance, a task that would otherwise be intractable. While all three methods give the same result, the GTC Python package is the simplest and intrinsically provides a full uncertainty budget, including all correlations between measurement parameters. We then demonstrate how the development of a measurement model and the use of GTC has improved our understanding of the system. As a consequence, taking advantage of negative correlations between measurements in different geometries allows us to minimise the total uncertainty in integrated diffuse reflectance, lowering the standard uncertainty from 0.0029 to 0.0015.

Enhanced Degradation of Rhodamine B by Metallic Organic Frameworks Based on NH2-MIL-125(Ti) under Visible Light

Samples of the bimetallic-based NH2-MIL-125(Ti) at a ratio of Mn+/Ti4+ is 0.15 (Mn+: Ni2+, Co2+ and Fe3+) were first synthesized using the solvothermal method. Their fundamental properties were analyzed by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), Raman spectra, scanning electron microscopy (SEM), N2 adsorption–desorption measurements, and UV–Vis diffuse reflectance spectroscopy (UV-Vis DRS). The as-acquired materials were used as high-efficiency heterogeneous photocatalysts to remove Rhodamine B (RhB) dye under visible light. The results verified that 82.4% of the RhB (3 × 10−5 M) was degraded within 120 min by 15% Fe/Ti−MOFs. Furthermore, in the purpose of degrading Rhodamine B (RhB), the rate constant for the 15% Fe/Ti-MOFs was found to be 2.6 times as fast as that of NH2-MIL-125(Ti). Moreover, the 15% Fe/Ti-MOFs photocatalysts remained stable after three consecutive cycles. The trapping test demonstrated that the major active species in the degradation of the RhB process were hydroxyl radicals (HO∙) and holes (h+).

Europium-Doped Y2O3-Coated Diatomite Nanomaterials: Hydrothermal Synthesis, Characterization, Optical Study with Enhanced Photocatalytic Performance

Eu-doped Y2O3 coated diatomite nanostructures with variable Eu3+ contents were synthesized by a facile hydrothermal technique. The products were characterized by means of energy dispersive X-ray photoelectron spectroscopy (EDX), scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Brunauer–Emmett–Teller (BET), UV-vis diffuse reflectance spectroscopy, and photoluminescence spectroscopy techniques. As claimed by PXRD, the particles were crystallized excellently and attributed to the cubic phase of Y2O3. The influence of substitution of Eu3+ ions into Y2O3 lattice caused a redshift in the absorbance and a decrease in the bandgap of as-prepared coated compounds. The pore volume and BET specific surface area of Eu-doped Y2O3-coated diatomite is greater than uncoated biosilica. The sonophotocata-lytic activities of as-synthesized specimens were evaluated for the degradation of Reactive Blue 19. The effect of various specifications such as ultrasonic power, catalyst amount, and primary dye concentration was explored.