Tekstualisme Dan Kontekstualisme Penafsiran Kontemporer Terhadap Surah Al-Maidah Ayat 38

Not only in the interpretation of classical scholars, the discourses on the interpretation of contemporary scholars are also diverse and often contradictory even though they are based on the same textual basis of the Qur'anic verse. This study intends to identify trends in the interpretation of contemporary scholars regarding the legal sanctions for cutting hands in al-Maidah verse 38. Two figures are studied, namely Ibn 'Asyur and Muhammad Syahrur. The main data objects of this research, namely the book (kitab) entitled al-Tahrîr wa al-Tanwîr by Muhammad Tahir Ibn 'Asyur and al-Kitâb wa al-Qur'ân Qirâ'ah Mu'âsirah by Muhammad Syahrur, and. The research approach used is a philosophical normative approach. The analytical theory used is the typology of textualism and contextualism of interpretation which was coined by Abdullah Saeed. Meanwhile, the nature of the research approach is descriptive-analytic. The results of the study conclude that the interpretation of Ibn 'Asyur regarding al-Ma'idah verse 38 can be categorized as a textual interpretation. This can be seen from his interpretation of the literal meaning of the verse. In addition, Ibn 'Asyur also tends to view the punishment of cutting off hands for thieves to be a deterrent as well as a preventive measure. In contrast to Ibn 'Asyur, Muhammad Syahrur's interpretation of the legal case of cutting off hands for thieves includes contextual interpretation. This can be seen when he understands the verse of cutting off hands for thieves, he gives a meaning that gives space for ijtihad for an area and conditions to enforce punishments that have a deterrent effect, provided that it must not exceed the punishment of cutting off handsas the maximum limit.

RADAR-BASED RAINFALL ESTIMATION IN BOYONG RIVER (BO-D5)

Sediment-related disasters are terrible disasters that can catastrophically impact facilities. People must keep in mind to make sediment-related disaster information that can be predicted from rainfall and response of drainage area by using snakelike. This research produces important indices on precipitation related to debris. It shows the current status of the stage of the response of drainage area against rainfall by using a couple of short- and long-term indices. It shows the water storage volume in the soil layer with the calculation of soil water index (SWI) by using X-band MP (Multi-Parameter) rainfall radar data that has been installed at the top of Merapi Mountain (Merapi Museum). It was confirmed that from June 2018 – June 2019, with 80.28 mm SWI, maximum values do not exceed the standard reference value of SWI (120 – 160 mm) set from JMA. It means that 80.28 mm of SWI value has not yet become the maximum limit of SWI value for lahar occurrence in the Boyong drainage area (BO-D5). The maximum limit of SWI value can be generated if sediment disaster occurrences are available.

Rancang Bangun Prototipe Keamanan Ruang Laboratorium dengan Pintu Otomatis Menggunakan Sensor Suhu MLX90614 Berbasis Arduino Atmega 2560

Research on laboratory room security system has begun to be developed with various kinds of inputs used. In this study, the design of a laboratory room security prototype with automatic doors has been realized using the MLX90614 temperature sensor based on Arduino Atmega 2560. The design of this prototype aims to design a prototype laboratoey room with automatic doors using a door lock solenoid and a temperature sensor MLX90614. In addition, this system is equipped with a counter to reduce and add people in the room using the FC-51 infrared sensor. Data retrieval is done by detecting human temperature before entering the room, when the temperature input is met, the door of the room will open with a maximum limit of 10 people. The results showed that the system was functioning properly, indicated by the state of the door that could open when it received an input of temperature between 35-37°C, the door remained closed when detecting of temperature other than 35-37°, and the door remained closed when the object in the room was up to 10 people.

Analisis Kadar Tartrazin Dalam Hard Candy Di Kecamatan Tirto Kabupaten Pekalongan

Tartrazine is a synthetic dye that produces a lemon yellow color, and is often added to food or drinks. The addition of tartrazine in food and beverages aims to provide color, so it looks more attractive. The purpose of this research was to analyze content of tartrazine and determine concentration of tartrazine in hard candy. The method used in this research is qualitative and quantitative analysis. Qualitative analysis was carried out by color reaction using FeSO4 30% reagent solution. Quantitative analysis was carried out using UV-Vis spectrophotometry us a wavelength of 429 nm. The results showed that of the ten positive samples contained tartrazine. The concentration of tartrazine in the samples studied were sample A is 196.65 mg/kg, sample B is 75.57 mg/kg, sample C is 283.50 mg/kg, sample D is 89.83 mg/kg, sample E is 356.24 mg/kg, sample F is 73.80 mg/kg, sample G is 3.27 mg/kg, sample H is 308.98 mg/kg, sample I is 3.94 mg/kg, and sample J is 37.08 mg/kg. So from this research, it is known that concentration of tartrazine in samples of hard candy A, C, E and H are not safe because the levels exceed the maximum limit of the requirements set out in BPOM Regulation No. 11 of 2019.Keywords: Analysis; Concentration; Tartrazine; Dyes; UV-Vis Spectrophotometry AbstrakTartrazin merupakan zat pewarna sintesis yang menghasilkan warna kuning lemon, serta sering ditambahkan dalam makanan ataupun minuman. Penambahan tartrazin dalam makanan dan minuman bertujuan untuk memberikan warna, sehingga terlihat lebih menarik. Tujuan dari penelitian ini adalah untuk menganalisis kandungan tartrazin dan mengetahui kadar tartrazin dalam hard candy. Metode yang digunakan dalam penelitian ini analisis kualitatif dan kuantitatif. Analisis kualitatif dilakukan dengan reaksi warna menggunakan larutan pereaksi FeSO4 30%. Analisis kuantitatif dilakukan dengan metode spektrofotometri UV-Vis pada panjang gelombang 429 nm. Hasil penelitian menunjukkan bahwa dari ke sepuluh sampel positif mengandung tartrazin. Kadar tartrazin dalam sampel yang diteliti yaitu sampel A sebanyak 196,65 mg/kg, sampel B sebanyak 75,57 mg/kg, sampel C sebanyak 283,50 mg/kg, sampel D sebanyak 89,83 mg/kg, sampel E sebanyak 356,24 mg/kg, sampel F sebanyak 73,80 mg/kg, sampel G sebanyak 3,27 mg/kg, sampel H sebanyak 308,98 mg/kg, sampel I sebanyak 3,94 mg/kg, dan sampel J sebanyak 37,08 mg/kg. Dari penelitian ini diketahui bahwa kadar tartrazin pada sampel permen keras A, C, E dan H tidak aman karena kadarnya melebihi batas maksimum dari persyaratan yang telah ditetapkan pada Peraturan BPOM No.11 Tahun 2019.Kata kunci: Analisis; Kadar; Tartrazin; Zat Pewarna; Spektrofotometri UV-Vis

Assessment of hospitalization costs and its determinants in infants with clinical severe infection at a public tertiary hospital in Nepal

Sepsis, an important and preventable cause of death in the newborn, is associated with high out of pocket hospitalization costs for the parents/guardians. The government of Nepal’s Free Newborn Care (FNC) service that covers hospitalization costs has set a maximum limit of Nepalese rupees (NPR) 8000 i.e. USD 73.5, the basis of which is unclear. We aimed to estimate the costs of treatment in neonates and young infants fulfilling clinical criteria for sepsis, defined as clinical severe infection (CSI) to identify determinants of increased cost. This study assessed costs for treatment of 206 infants 3–59 days old, enrolled in a clinical trial, and admitted to the Kanti Children’s Hospital in Nepal through June 2017 to December 2018. Total costs were derived as the sum of direct costs for bed charges, investigations, and medicines and indirect costs calculated by using work time loss of parents. We estimated treatment costs for CSI, the proportion exceeding NPR 8000 and performed multivariable linear regression to identify determinants of high cost. Of the 206 infants, 138 (67%) were neonates (3–28 days). The median (IQR) direct costs for treatment of CSI in neonates and young infants (29–59 days) were USD 111.7 (69.8–155.5) and 65.17 (43.4–98.5) respectively. The direct costs exceeded NPR 8000 (USD 73.5) in 69% of neonates with CSI. Age <29 days, moderate malnutrition, presence of any sign of critical illness and documented treatment failure were found to be important determinants of high costs for treatment of CSI. According to this study, the average treatment cost for a newborn with CSI in a public tertiary level hospital is substantial. The maximum limit offered for free newborn care in public hospitals needs to be revised for better acceptance and successful implementation of the FNC service to avert catastrophic health expenditures in developing countries like Nepal. Trial Registration: CTRI/2017/02/007966 (Registered on: 27/02/2017).

KAJIAN PENURUNAN KADAR BESI (FE) PADA AIR SUMUR GALI MENGGUNAKAN METODE FILTRASI DENGAN VARIASI BESARAN BILANGAN IODINE PADA KARBON AKTIF

<p>Dermonganti hamlet, Ketitang village, Jumo Sub-distric, Temanggung distric is the area which most of the people use dug well water. The result from the three parameters that are tested. They are TDS, Ph, and iron rate (Fe) that is obtain from the result of iron rate (Fe) 2,56mg/l, 2,525mg/l 2,69 mg/L. The result is more than 1 mg/l means that exceeding the quality standards of maximum limit from the regulation of Minister of Health of the Indonesian Republic number 32 in the year 2017. So, dug well water processing is required through the filtration to reduce iron rate (Fe). The research used a tubular filtration contains a filter media that are sands, pumice, active carbon that have the magnitude of each iodine is 650mg/l, 800mg/l, 1000mg/l with each filter media thickness is 30cm. Parameter reviewed is iron rate (Fe). The processing is carried out with contact time 1 hour, 2 hours, 3hours for every variation. Data analysis used are regression analysis and Anova test. The result of filtration shows the highest removal value of iron rate (Fe) occurs to the 1 unit filtration with 1 hour contact time. The iron rate removal score (Fe) at 1 hour used filter 1 with the sand, pumice and active carbon as filter medias with the iodine number 1000mg/g with the percentage 59,17%. The greater its iodine number of activated carbon shows the increasing value of removal iron rate content.</p><strong>Key words:</strong> Iodine number, Filtration, Iron rate.

Analysis of Vibration and Noise on Vibrating Screen at PT. Mifa Bersaudara

The purpose of this study was to analyze the level of vibration and noise on the Equipment Vibrating screen crusher FC 02 at PT. MIFA Bersaudara. Vibration is measured using a vibration meter, noise is measured by a digital sound level meter. Measurements are made on the x, y and z axes at each measurement point. The results showed that the value of the vibration level on the Vibrating screen crusher FC 02 on the x-axis with the velocity value of 28.56 mm/s, the y-axis value of 29.82 mm/s and the z-axis velocity value of 25.46 mm/s. While the Acceleration value on the x-axis is 20.7 m/s 2 the value is 30.86 m/s 2on the y and z axes of 21.42 m/s 2 . While the noise value indicates that the average value on the right side is 99.6 dBA on the right side and 101.7 dBA on the left side. Efforts were made to overcome the problem, namely by not operating the VSC FC 02 exceeding the recommended maximum limit of 60 dBA and the maximum allowed which is 70 dBA so as to prevent problems of comfort, health, and safety at work. Operators and employees are advised to stay at the location for no more than 15-30 minutes, if more than that time must use safety earmuffs.

Pengaruh Penambahan Ekstrak Kecambah dan Kadar Gula Pasir Terhadap Karakteristik Nata De Soya dari Limbah Cair Tahu

The manufacture of Nata de soya uses additional chemicals in Zwavelzure Ammonia (ZA) which functions as a nitrogen source. ZA is dangerous if consumed at the maximum limit, so it needs to be replaced with natural ingredients. Sprout is one of the natural ingredients containing organic nitrogen. This mung bean sprout will be used as a nitrogen source to replace the function of ZA. This study aims to determine the effect of adding green bean extract and sugar as characteristics of Nata de soya. This study is prepared using a completely randomized design (CRD). According to the Standard National Indonesian (SNI), the best test results obtained are 98.76% water content, 12.68% vitamin C, 22.74% yield, 1.1 cm thickness, and less than 4.5% fiber content.ABSTRAKPembuatan nata de soya menggunakan bahan kimia tambahan berupa Zwavelzure Ammoniak (ZA) yang berfungsi sebagai sumber nitrogen. ZA berbahaya jika dikonsumsi dalam batas maksimum sehingga perlu diganti dengan bahan alami. Kecambah adalah salah satu bahan alami yang mengandung nitrogen organik. Kecambah kacang hijau inilah yang akan digunakan sebagai sumber nitrogen untuk menggantikan fungsi dari ZA. Penelitian ini bertujuan untuk mengetahui pengaruh penambahan ekstrak kecambah kacang hijau dan gula sebagai karakteristik nata de soya. Penelitian ini menggunakan metode Rancangan Acak Lengkap (RAL). Didapat hasil uji terbaik kadar air 98,76%, vitamin c 12,68%, rendemen 22,74%, ketebalan 1,1 cm dan kadar serat kurang dari 4,5% sesuai Standar Nasional Indonesia (SNI).

Implementasi Pendistribusian Zakat Produktif untuk Usaha Mikro Mustahik di Era Pandemi Covid-19

Poverty and unemployment are problems that Indonesia is still facing today. The COVID-19 pandemic has had a significant impact on the national economy, including the MSME sector. Productive zakat distributed to MSMEs has the potential to help develop and form MSMEs mustahik in the era of the covid 19 pandemic. The implementation of zakat is important to see the potential of zakat in an effort to help mustahik to be more empowered to face the challenges of the times. This study aims to find out how to implement the distribution of productive zakat for mustahiq micro-enterprises during the pandemic, and to find out the obstacles faced by the Bogor City Baznas when distributing productive zakat during the pandemic. This research is a qualitative research with a qualitative descriptive approach. The data collection technique used is the interview and documentation method. Interviews were conducted with the Baznas of Bogor City as the authorized party in the distribution of zakat. The results showed that the Bogor City Baznas distributed productive zakat in the form of business capital. The productive zakat is distributed to individual and group mustahik. The Bogor Berkah program is included in the productive zakat based on taklim majlis. The maximum limit for assistance provided is Rp. 2,000,000. Recipients of productive zakat are also required to give infaq every day from the results of their efforts. Constraints faced by the Bogor City Baznas at the beginning of the pandemic were the reduced number of muzakki who distributed their zakat, limited space for monitoring, and efforts to develop MSMEs that were difficult to carry out.

DESIGN AND MANUFACTURE OF BAMBOO HANDICRAFT DRYER MACHINE BASED ON LPG GAS

Bamboo plant is one of Indonesia's natural resources. People use bamboo to make household furniture, fences, frames, and handicrafts. Bamboo plant is a special commodity that can be used as various kinds of handicraft products in DIY, precisely in Brajan area, Sleman Regency. Based on observations that have been conducted on one of the bamboo craftsmen in the Brajan area, bamboo handicraft is in great demand due to they have a unique and ethnic appearance, but the production process is quite complicated and takes a long time. According to the literature, this is due to bamboo plants are classified as herbaceous plants, namely plants with watery or wet stems. So far, the method used is drying bamboo handicrafts under the hot sun, and using a dryer that can only be used for one type of handicraft. This method is not optimal and not effective for producing bamboo handicrafts. Therefore, it is necessary to apply appropriate technology to optimize the production of bamboo crafts, the solution is to manufacture bamboo dryers to facilitate bamboo handicraft producers in the bamboo drying process. In general, the appearance of this tool resembles a cupboard. This tool has a size of 1200x800x1800 mm with three chambers. This tool works by utilizing the heat from the LPG gas stove. As a temperature controller, this tool is equipped with a blower that has been programmed with Arduino Uno and functions to stabilize the temperature if the heat generated exceeds the maximum limit. The dryer machine can dry bamboo handicrafts to a water content of 2.5% in just 40 minutes, very efficient compared to conventional methods. This tool can facilitate and optimize the production of bamboo handicrafts in the ​​Brajan area, Sleman, Special Region of Yogyakarta.