Multiple ratiometric nanothermometry using semiconductor BiFeO3 nanowires and quantitative validation of thermal sensitivity

Here, we report a very sensitive, non-contact, ratio-metric, and robust luminescence-based temperature sensing using a combination of conventional photoluminescence (PL) and negative thermal quenching (NTQ) mechanisms of semiconductor BiFeO3 (BFO) nanowires. Using this approach, we have demonstrated the absolute thermal sensitivity of ~ 10 mK−1 over the 300–438 K temperature range and the relative sensitivity of 0.75% K−1 at 300 K. Further, we have validated thermal sensitivity of BFO nanowires quantitatively using linear regression and analytical hierarchy process (AHP) and found close match with the experimental results. These results indicated that BFO nanowires are excellent candidates for developing high‐performance luminescence-based temperature sensors. Graphical abstract

Two-step hybrid process of movable part inside glass substrate using ultrafast laser

We demonstrate a two-step hybrid process for fabricating movable parts inside glass substrate using the selective laser-induced etching (SLE) process that is consisted of laser-direct writing and wet chemical etching. To obtain an influence by the optical characteristics of a glass substrate when fabricating a 3D microstructure using the SLE, we analyzed the relationship of their dimensions between the designed and the fabricated devices. Two 3D microfluidic devices are designed and fabricated on glass substrates as the demonstrations of the hybrid process: a 3D microfluidic valve device with a movable plug and a 3D microfluidic mixer with a rotatable impeller and multilayer microchannels. The valving plug and the impeller of each device are successfully moved and rotated. The smallest structure is a pillar of the impeller device, and its size is 29 μm (diameter) × 277 μm (height). We expect this study to be extended to potential applications in 3D glass microfabrication and microfluidic systems.

Synthesis of metallic aluminum particles by electrolysis in aqueous solution

The present work proposes a method for fabricating metallic Al particles in aqueous solution. An aqueous colloidal solution was prepared from an aqueous aluminum nitrate nonahydrate solution by electrolysis using metallic Al plates as the anode and cathode under ultrasonic irradiation in water at 25–45 °C. The sizes of the particles in the colloidal solutions prepared at 25, 35, and 45 °C were 76.3, 77.0, and 84.7 nm, respectively. The powder obtained from the colloidal solution prepared at 25 °C was not crystalline. By contrast, the powders obtained from the colloidal solutions prepared at 35 and 45 °C had a crystal structure of cubic Al and crystal sizes of 55.7 and 59.3 nm, respectively. Thus, elevated temperatures promoted both particle growth and crystal growth, which was explained by higher temperatures increasing the frequency and energy of particle collisions. The metallic Al particles were chemically stable in both an aqueous solution and the ambient atmosphere. The chemically stable metallic Al particles are expected to be used as sources for fabricating materials related to fuels, energy storage, and pigments.

Micro multi-nozzle jet coating of organic thin film for organic light-emitting diode lighting devices

Uniform deposition across large areas of an organic layer is one of the challenges for the industrial application of solution-based organic light‐emitting diode (OLED). In this paper, we propose an organic thin film deposition method for OLED using a micro multi-nozzle jet coating process. The developed micro multi-nozzle jet head consists of eighteen nozzles (100 μm diameter), a side suction line, inlets, and a nozzle protection outer hole. To demonstrate organic thin film deposition for OLED lighting device fabrication, a poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) solution was used as a hole injection layer (HIL). Thickness uniformity of the PEDOT:PSS thin film was analyzed by regulating the jetting pressure. Through single-path coating of twelve successive stable column-jet flows, PEDOT:PSS organic film of 26 mm width was coated on an ITO substrate at 1 m/s head speed. The PEDOT:PSS thin film of 24.25 ± 1.55 nm (CV = 6.39%) thickness was obtained by the proposed coating method. For the feasibility test, OLED lighting devices with emission areas of 20 mm × 20 mm and 70 mm × 70 mm were successfully fabricated using PEDOT:PSS films deposited by a micro multi-nozzle jet coating method.

CMOS voltage-controlled oscillator with high-performance MEMS tunable inductor

LC CMOS voltage-controlled oscillators (VCOs) with tunable inductors are essential for high-performance, multi-band communication systems, such as IoT applications and 5G communication. However, VCOs that use CMOS tunable inductors have difficulty in achieving high RF performance due to the low Q-factor of the inductor. In addition, previously reported CMOS VCOs integrated with MEMS inductors have used CMOS switches for tuning frequency bands, but they also had large signal losses on the switch. Herein, we propose a CMOS VCO that is integrated with a MEMS tunable inductor that tunes the frequency band with three MEMS switches. The proposed MEMS tunable inductor enables us to achieve high RF performance due to the suspended structure, and RF MEMS switches enable lower signal loss than CMOS switches. In this work, we successfully fabricated the proposed CMOS VCO integrated with a MEMS tunable inductor using the flip-chip bonding process, and we measured oscillation frequencies according to the actuation of the three switches. The oscillation powers were measured as − 3.03 dBm @ 1.39 GHz, − 5.80 @ 1.98 GHz, − 7.44 dBm @ 2.81 GHz, and − 8.77 dBm @ 3.68 GHz.

Efficacy in degradation of carcinogenic pollutant sulforhodamine B by green synthesized silver nanoparticles

Colloidal Silver nano-particles were grown at room temperature using leaf extract of Ocimum tenuiflorum. The silver nanoparticles suspended in the solution were found to be stable for over a period of 2 months. Structural, optical and photo catalytic behavior of the suspended silver (Ag) nano-particles (NPs) was characterized. From TEM analysis the size of the silver nanoparticles was estimated to be 25–30 nm. Our findings suggest that the ratio between the molarity of AgNO3 and the volume of leaf extract does not have any role in controlling the size of the Ag nano-particles. These green synthesized Ag nano-particles exhibit degradation of the carcinogenic organic pollutant sulforhodamine B in absence of light.

Stereoscopic facial imaging for pain assessment using rotational offset microlens arrays based structured illumination

Conventional pain assessment methods such as patients’ self-reporting restrict the possibility of easy pain monitoring while pain serves as an important role in clinical practice. Here we report a pain assessment method via 3D face reading camera assisted by dot pattern illumination. The face reading camera module (FRCM) consists of a stereo camera and a dot projector, which allow the quantitative measurement of facial expression changes without human subjective judgement. The rotational offset microlens arrays (roMLAs) in the dot projector form a uniform dense dot pattern on a human face. The dot projection facilitates evaluating three-dimensional change of facial expression by improving 3D reconstruction results of non-textured facial surfaces. In addition, the FRCM provides consistent pain rating from 3D data, regardless of head movement. This pain assessment method can provide a new guideline for precise, real-time, and continuous pain monitoring.

A highly smart MEMS acetone gas sensors in array for diet-monitoring applications

In the present work, gas sensor arrays consisted of four different sensing materials based on CuO and their depositions on the MEMS microheaters were designed, fabricated and characterized. The sensor array is consisted with CuO, CuO with Pt NPs, ZnO–CuO and ZnO–CuO with Au NPs and their gas sensing properties are characterized for detection of exhaled breath-related VOCs. Through MEMS microheaters, power consumption is considered for application to healthcare devices which requires ultrasensitive acetone gas sensitivity. Also, using the principal component analysis, it enables to discriminate acetone gas, a biomarker for fat burning during diet, with other VOCs gases. The device would be applicable for on-site diet monitoring in the field of mobile healthcare.

Effects of low temperature on electrophysiology and mechanophysiology of human induced pluripotent stem cell-derived cardiomyocytes (hiPSC-CMs)

Studies related to low temperature and their effect on cardiomyocytes are essential as hypothermia—like situations have been known to induce arrhythmia or ventricular fibrillation. Till date, several studies have been carried out on animals and their electrophysiological responses have been studied in the form of action potential. However, for a complete assessment of the effect of low temperature, mechanophysiological changes along with electrophysiological changes need to be investigated, at the tissue level. In this study, the effect of culture temperature on cell growth has been studied by measuring the field potential and contractility of human induced pluripotent stem cell-derived cardiomyocytes. This study has the potential to further improve the understanding of low temperature on human cells.

Green synthesized plant-based silver nanoparticles: therapeutic prospective for anticancer and antiviral activity

Nanotechnology holds an emerging domain of medical science as it can be utilized virtually in all areas. Phyto-constituents are valuable and encouraging candidates for synthesizing green silver nanoparticles (AgNPs) which possess great potentials toward chronic diseases. This review gives an overview of the Green approach of AgNPs synthesis and its characterization. The present review further explores the potentials of Phyto-based AgNPs toward anticancer and antiviral activity including its probable mechanism of action. Green synthesized AgNPs prepared by numerous medicinal plants extract are critically reviewed for cancer and viral infection. Thus, this article mainly highlights green synthesized Phyto-based AgNPs with their potential applications for cancer and viral infection including mechanism of action and therapeutic future prospective in a single window.