Methods for Collective Displacement of Modular Self-reconfigurable Robots

2006 ◽  
pp. 641-648
Author(s):  
Elian Carrillo ◽  
Dominique Duhaut
Author(s):  
Guimin Chen ◽  
Yanjie Gou ◽  
Aimei Zhang

A compliant multistable mechanism is capable of steadily staying at multiple distinct positions without power input. Many applications including switches, valves, relays, positioners, and reconfigurable robots may benefit from multistability. In this paper, two new approaches for synthesizing compliant multistable mechanisms are proposed, which enable designers to achieve multistability through the use of a single bistable mechanism. The synthesis approaches are described and illustrated by several design examples. Compound use of both approaches is also discussed. The design potential of the synthesis approaches is demonstrated by the successful operation of several instantiations of designs that exhibit three, four, five, and nine stable equilibrium positions, respectively. The synthesis approaches enable us to design a compliant mechanism with a desired number of stable positions.


2003 ◽  
Vol 44 (3-4) ◽  
pp. 191-199 ◽  
Author(s):  
K. Støy ◽  
W.-M. Shen ◽  
P.M. Will

Author(s):  
David Ko ◽  
Nalaka Kahawatte ◽  
Harry H. Cheng

Highly reconfigurable modular robots face unique teleoperation challenges due to their geometry, configurability, high number of degrees of freedom and complexity. Current methodology for controlling reconfigurable modular robots typically use gait tables to control the modules. Gait tables are static data structures and do not readily support realtime teleoperation. Teleoperation techniques for traditional wheeled, flying, or submerged robots typically use a set of joysticks to control the robots. However, these traditional methods of robot teleoperation are not suitable for reconfigurable modular robotic systems which may have dozens of controllable degrees of freedom. This research shows that modern cell phones serve as highly effective control platforms for modular robots because of their programmability, flexibility, wireless communication capabilities, and increased processing power. As a result of this research, a versatile Graphical User Interface, a set of libraries and tools have been developed which even a novice robotics enthusiast can use to easily program their mobile phones to control their hobby project. These libraries will be beneficial in any situation where it is effective for the operator to use an off-the-shelf, relatively inexpensive, hand-held mobile phone as a remote controller rather than a considerably heavy and bulky remote controllers which are popular today. Several usage examples and experiments are presented which demonstrate the controller’s ability to effectively control a modular robot to perform a series of complex gaits and poses, as well as navigating a module through an obstacle course.


Author(s):  
Farhad Aghili

The paper presents a new paradigm and conceptual design for reconfigurable robots. Unlike conventional reconfigurable robots, our design doesn't achieve reconfigurability by utilizing modular joints. But the robot is equipped with passive joints, i.e. joints with no actuator or sensor, which permit changing the Denavit-Hartenberg (DV) parameters such as the arm length, and the twist angle. The passive joints are controllable when the robot forms a closed kinematic chain. Also each passive joint is equipped with a built-in brake mechanism which is normally locked but it can be released whenever changing of the parameters is required. Kinematics analysis of such a robot plus control synthesis and mechanical design of the brake mechanism are described.


2021 ◽  
Author(s):  
Mohammad Mehrabi

The concept of reconfigurability and its applications in robotics have become prominent in the past few years as they provide versatility, adaptability and scalability to the systems. The reconfigurable robots can perform tasks in outer space, under the sea and in hazardous environments by rearranging their physical configurations to alter the system’s behavior and geometry. However, the concept of reconfigurable robots is not just constrained by the mechanical reconfiguration of the components, for the system should also demonstrate a modular reconfigurable behavior to newly imposed conditions. The objective of this work was to design and implement a multi-modal reconfigurable platform based on the concept of “form follows function” to be integrated with 3D-Immersive telepresence systems. The developed system was analyzed to verify the feasibility and functionality of the proposed architecture, and suggestions were made for future improvements.


Author(s):  
Satoshi Murata ◽  
Akiya Kamimura ◽  
Haruhisa Kurokawa ◽  
Eiichi Yoshida ◽  
Kohji Tomita ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document