Modeling and Analysis of Passive Suspension System Using Half Car Model Based on Hybrid Shock Absorber Model

2020 ◽  
pp. 1225-1237
Author(s):  
Vijay Barethiye ◽  
G. Pohit ◽  
A. Mitra
Keyword(s):  
Shock Absorber ◽  
Suspension System ◽  
Modeling And Analysis ◽  
Passive Suspension ◽  
Car Model ◽  
Model Based ◽  
Passive Suspension System

H∞ Control of Active Suspension System for a Quarter Car Model

2016 ◽  
Vol 8 (1) ◽  
Author(s):  
N.M. Ghazaly ◽  
A.S Ahmed ◽  
A.S Ali ◽  
G.T Abd El- Jaber
Keyword(s):  
Ride Comfort ◽  
Active Suspension ◽  
Suspension System ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Suspension Systems ◽  
Car Model ◽  
Active Suspension Systems ◽  
Passive Suspension System ◽  
Quarter Car

In recent years, the use of active control mechanisms in active suspension systems has attracted considerable attention. The main objective of this research is to develop a mathematical model of an active suspension system that is subjected to excitation from different road profiles and control it using H∞ technique for a quarter car model to improve the ride comfort and road handling. Comparison between passive and active suspension systems is performed using step, sinusoidal and random road profiles. The performance of the H∞ controller is compared with the passive suspension system. It is found that the car body acceleration, suspension deflection and tyre deflection using active suspension system with H∞ technique is better than the passive suspension system.

scholarly journals Optimal Control Design of Active Suspension System Based on Quarter Car Model

2019 ◽  
Vol 11 (2) ◽  
pp. 55
Author(s):  
Nur Uddin
Keyword(s):  
Optimal Control ◽  
Ride Comfort ◽  
Control Design ◽  
Active Suspension ◽  
Suspension System ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Car Model ◽  
Passive Suspension System ◽  
Quarter Car

The optimal control design of the ground-vehicle active suspension system is presented. The active suspension system is to improve the vehicle ride comfort by isolating vibrations induced by the road profile and vehicle velocity. The vehicle suspension system is approached by a quarter car model. Dynamic equations of the system are derived by applying Newton’s second law. The control law of the active suspension system is designed using linear quadratic regulator (LQR) method. Performance evaluation is done by benchmarking the active suspension system to a passive suspension system. Both suspension systems are simulated in computer. The simulation results show that the active suspension system significantly improves the vehicle ride comfort of the passive suspension system by reducing 50.37% RMS of vertical displacement, 45.29% RMS of vertical velocity, and 1.77% RMS of vertical acceleration.

Development of Passive Quarter Car Suspension Prototype

2015 ◽  
Vol 761 ◽  
pp. 238-244
Author(s):  
Che Amran Aliza ◽  
Fen Ying Chin ◽  
Mariam Md Ghazaly ◽  
Shin Horng Chong ◽  
Vasanthan Sakthivelu
Keyword(s):  
Pulse Width ◽  
Suspension System ◽  
Vehicle Body ◽  
Laboratory Equipment ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Car Model ◽  
Input Pressure ◽  
Passive Suspension System ◽  
Quarter Car

In this paper, a construction of a prototype to represent passive vehicle suspension system for quarter car model is considered. The prototype is represented by two degree-of freedom quarter-car model which are conventionally used by researchers. This laboratory equipment is developed in order to familiarize students with 2 DoF passive suspension system model. It consists of two masses, two springs and a damper. This equipment is easily dismantled and could be assembled with different spring and damper constants which contribute to different characteristics of the suspension system. A number of experiments have been carried out using the experiment setup in order to identify the suspension system characteristics i.e. experiments with different vehicle body mass, different period for one pulse and different pulse width of input pressure of the road excitation have been conducted. The experiment results are evaluated based on the vehicle body displacement and tire displacement of the prototype. Experiment results show that the pulse width of the input pressure or road profile is directly affected the characteristic of this passive suspension system. Lastly, simulations were done in order to compare the simulation and experimental results.

Simulation of Quarter-Car Model with Magnetorheological Dampers for Ride Quality Improvement

2018 ◽  
Vol 10 (3) ◽  
Author(s):  
Sunil Kumar Sharma ◽  
Rakesh Chandmal Sharma
Keyword(s):  
Degrees Of Freedom ◽  
Active Suspension ◽  
Suspension System ◽  
Ride Quality ◽  
Bingham Model ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Car Model ◽  
Passive Suspension System ◽  
Quarter Car

A semi-active suspension system using Magnetorheological (MR) damper overcomes all the inherent limits of passive and active suspension systems and combines the advantages of both. This paper gives a concise introduction to the suspension system of a passenger vehicle which is presented along with the analysis of semi-active suspension system using MR fluid dampers based on Bingham model. MR dampers are filled with MR fluids whose properties can be controlled by applying voltage signal. To further prove the statement, a quarter car model with two degrees of freedom has been used for modeling the suspension system the sprung mass acceleration of passive suspension system has been compared with the semi-active suspension system using the Bingham model for MRF damper. Simulink/MATLAB is used to carry out the simulation. The results drawn show that the semi-active suspension system performed better than the passive suspension system in terms of vehicle stability.

Comparison of Control Strategies Applied to Nonlinear Quarterly Car Passive Suspension System

2015 ◽  
Vol 8 (3) ◽  
pp. 203
Author(s):  
Muhammad Sani Gaya ◽  
Amir Bature ◽  
Lukman A. Yusuf ◽  
I. S. Madugu ◽  
Ukashatu Abubakar ◽  
...  
Keyword(s):  
Control Strategies ◽  
Suspension System ◽  
Passive Suspension ◽  
Passive Suspension System

Multi-Objective Optimal Design of Passive Suspension System With Inerter Damper

2018 ◽  
Author(s):  
Xiaotian Xu ◽  
Yousef Sardahi ◽  
Chenyu Zheng
Keyword(s):  
Optimal Design ◽  
Suspension System ◽  
Design Parameters ◽  
Head Acceleration ◽  
Crest Factor ◽  
Nsga Ii ◽  
Passive Suspension ◽  
Trade Offs ◽  
Passive Suspension System ◽  
Unsprung Mass

This paper presents a many-objective optimal design of a four-degree-of-freedom passive suspension system with an inerter device. In the optimization process, four objectives are considered: passenger’s head acceleration (HA), crest factor (CF), suspension deflection (SD), and tire deflection (TD). The former two objectives are important for the health and comfort of the driver and the latter two quantify the suspension system performance. The spring ks and damping cs constants between the sprung mass and unsprung mass, the inertance coefficient B, and the tire spring constant ky are considered as design parameters. The non-dominated sorting genetic algorithm (NSGA-II) is used to solve this optimization problem. The results show that there are many optimal trade-offs among the design objectives that could be applicable to suspension design in the industry.

Active Vehicle Suspension Control Using Full State-Feedback Controller

2015 ◽  
Vol 1115 ◽  
pp. 440-445 ◽  
Author(s):  
Musa Mohammed Bello ◽  
Amir Akramin Shafie ◽  
Raisuddin Khan
Keyword(s):  
State Feedback ◽  
Ride Comfort ◽  
Active Suspension ◽  
Suspension System ◽  
Feedback Controller ◽  
Vehicle Suspension ◽  
Passive Suspension ◽  
Full State ◽  
Full State Feedback ◽  
Passive Suspension System

The main purpose of vehicle suspension system is to isolate the vehicle main body from any road geometrical irregularity in order to improve the passengers ride comfort and to maintain good handling stability. The present work aim at designing a control system for an active suspension system to be applied in today’s automotive industries. The design implementation involves construction of a state space model for quarter car with two degree of freedom and a development of full state-feedback controller. The performance of the active suspension system was assessed by comparing it response with that of the passive suspension system. Simulation using Matlab/Simulink environment shows that, even at resonant frequency the active suspension system produces a good dynamic response and a better ride comfort when compared to the passive suspension system.

scholarly journals Design of Passive Suspension System of Railway Vehicles via Control Theory

2008 ◽  
Vol 2 (2) ◽  
pp. 518-527 ◽  
Author(s):  
Hung Chi NGUYEN ◽  
Akira SONE ◽  
Daisuke IBA ◽  
Arata MASUDA
Keyword(s):  
Control Theory ◽  
Suspension System ◽  
Passive Suspension ◽  
Railway Vehicles ◽  
Passive Suspension System

A New Variable Stiffness Suspension Mechanism

2011 ◽  
Author(s):  
Olugbenga M. Anubi ◽  
Carl D. Crane
Keyword(s):  
Transfer Function ◽  
Ride Comfort ◽  
Main Idea ◽  
Variable Stiffness ◽  
Suspension System ◽  
Passive Suspension ◽  
Quarter Car Model ◽  
Road Disturbance ◽  
Passive Suspension System ◽  
Suspension Performance

A new variable stiffness suspension system based on a recent variable stiffness mechanism is proposed. The overall system is composed of the traditional passive suspension system augmented with a variable stiffness mechanism. The main idea is to improve suspension performance by varying stiffness in response to road disturbance. The system is analyzed using a quarter car model. The passive case shows much better performance in ride comfort over the tradition counterpart. Analysis of the invariant equation shows that the car body acceleration transfer function magnitude can be reduced at both the tire-hop and rattle space frequencies using the lever displacement transfer function thereby resulting in a better performance over the traditional passive suspension system. An H∞ controller is designed to correct for the performance degradation in the rattle space thereby providing the best trade-off between the ride comfort, suspension deflection and road holding.

Sign in / Sign up

Export Citation Format

Share Document