Source function of stress waves of a spherical explosive source

1973 ◽  
Vol 109 (1) ◽  
pp. 1743-1751 ◽  
Author(s):  
Vladimír Schenk
Keyword(s):  
Source Function ◽  
Stress Waves ◽  
Explosive Source

An experimental study of source motion synthesis from first arrivals

1963 ◽  
Vol 53 (5) ◽  
pp. 955-963
Author(s):  
Henry N. Pollack
Keyword(s):  
Experimental Study ◽  
Source Function ◽  
Seismic Source ◽  
The Body ◽  
Body Waves ◽  
Fixed Position ◽  
Explosive Source ◽  
Simple Medium ◽  
Surface Ice ◽  
Source Motion

Abstract The motion near a seismic source is synthesized from experimentally obtained seismograms of non-dispersed body waves. The body waves were emitted from an explosive source submerged in a lake with a frozen surface. The seismograms were recorded at several distances by moving the source to a greater depth for each record, while the seismometer remained in a fixed position on the surface ice sheet. All syntheses of the waveform one meter from the source yield the impulsive nature of the source. Deviations between the synthesized one-meter record and the observed one-meter motion are thought to reflect primarily the changing character of the shot medium with depth from the ice. These results indicate that over the short propagation distances (about three wavelengths for the higher frequencies recorded) through the simple medium of this experiment, the observed waveforms and their associated spectra retain characteristics of the source function. The records also yield some information regarding the nature and structure of the elastic medium about the source.

Analysis of the expansion process of cracks caused by blasting stress waves in a PMMA medium with filled defects

2021 ◽  
pp. 102396
Author(s):  
Yanbing Wang ◽  
Jiaqing Dong ◽  
Zhaoyang Wang ◽  
Yabin Zhao
Keyword(s):  
Stress Waves ◽  
Expansion Process

scholarly journals Design and Analysis of a Novel Piezoceramic Stack-based Smart Aggregate

Sensors ◽  
2020 ◽  
Vol 20 (22) ◽  
pp. 6438
Author(s):  
Guangtao Lu ◽  
Xin Zhu ◽  
Tao Wang ◽  
Zhiqiang Hao ◽  
Bohai Tan
Keyword(s):  
Resonance Frequency ◽  
Electromechanical Coupling ◽  
Structural Parameters ◽  
Electromechanical Coupling Factor ◽  
Coupling Factor ◽  
Stress Waves ◽  
Parallel Connection ◽  
Smart Aggregate ◽  
In Series ◽  
Piezoelectric Wafers

A novel piezoceramic stack-based smart aggregate (PiSSA) with piezoceramic wafers in series or parallel connection is developed to increase the efficiency and output performance over the conventional smart aggregate with only one piezoelectric patch. Due to the improvement, PiSSA is suitable for situations where the stress waves easily attenuate. In PiSSA, the piezoelectric wafers are electrically connected in series or parallel, and three types of piezoelectric wafers with different electrode patterns are designed for easy connection. Based on the theory of piezo-elasticity, a simplified one-dimensional model is derived to study the electromechanical, transmitting and sensing performance of PiSSAs with the wafers in series and parallel connection, and the model was verified by experiments. The theoretical results reveal that the first resonance frequency of PiSSAs in series and parallel decreases as the number or thickness of the PZT wafers increases, and the first electromechanical coupling factor increases firstly and then decrease gradually as the number or thickness increases. The results also show that both the first resonance frequency and the first electromechanical coupling factor of PiSSA in series and parallel change no more than 0.87% as the Young’s modulus of the epoxy increases from 0.5 to 1.5 times 3.2 GPa, which is helpful for the fabrication of PiSSAs. In addition, the displacement output of PiSSAs in parallel is about 2.18–22.49 times that in series at 1–50 kHz, while the voltage output of PiSSAs in parallel is much less than that in parallel, which indicates that PiSSA in parallel is much more suitable for working as an actuator to excite stress waves and PiSSA in series is suitable for working as a sensor to detect the waves. All the results demonstrate that the connecting type, number and thickness of the PZT wafers should be carefully selected to increase the efficiency and output of PiSSA actuators and sensors. This study contributes to providing a method to investigate the characteristics and optimize the structural parameters of the proposed PiSSAs.

ULTRAFAST LASER‐INDUCED STRESS WAVES IN SOLIDS

1971 ◽  
Vol 18 (1) ◽  
pp. 33-35 ◽  
Author(s):  
E. D. Jones
Keyword(s):  
Stress Waves ◽  
Ultrafast Laser ◽  
Induced Stress
Sign in / Sign up

Export Citation Format

Share Document