Metallographic Studies into the Structure and Physicomechanical Properties of Coatings Obtained Using Plasma Methods

Metallurgist ◽  
2021 ◽  
Author(s):  
I. N. Kravchenko ◽  
S. V. Kartsev ◽  
S. A. Velichko ◽  
Yu. A. Kuznetsov ◽  
O. A. Sharaya ◽  
...  
Keyword(s):  
Physicomechanical Properties ◽  
Properties Of Coatings ◽  
Plasma Methods

METALLOGRAPHIC STUDIES OF STRUCTURE AND PHYSICAL AND MECHANICAL PROPERTIES OF COATINGS OBTAINED BY PLASMA METHODS

Metallurg ◽  
2021 ◽  
pp. 69-76
Author(s):  
I.N. Kravchenko ◽  
S.V. Kartsev ◽  
S.A. Velichko ◽  
Yu.A. Kuznetsov ◽  
O.A. Sharaya ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Physical And Mechanical Properties ◽  
Properties Of Coatings ◽  
Plasma Methods

Ferrozine Assay for Simple and Cheap Iron Analysis of Silica-Coated Iron Oxide Nanoparticles

2018 ◽  
Author(s):  
Hattie Ring ◽  
Zhe Gao ◽  
Nathan D. Klein ◽  
Michael Garwood ◽  
John C. Bischof ◽  
...  
Keyword(s):  
Iron Oxide ◽  
Iron Oxide Nanoparticles ◽  
Hydrofluoric Acid ◽  
Inductively Coupled Plasma ◽  
Silica Shell ◽  
Oxide Nanoparticles ◽  
Inductively Coupled ◽  
Digestion Process ◽  
Plasma Methods ◽  
Iron Analysis

The Ferrozinen assay is applied as an accurate and rapid method to quantify the iron content of iron oxide nanoparticles (IONPs) and can be used in biological matrices. The addition of ascorbic aqcid accelerates the digestion process and can penetrate an IONP core within a mesoporous and solid silica shell. This new digestion protocol avoids the need for hydrofluoric acid to digest the surrounding silica shell and provides and accessible alternative to inductively coupled plasma methods. With the updated digestion protocol, the quantitative range of the Ferrozine assay is 1 - 14 ppm. <br>

Ferrozine Assay for Simple and Cheap Iron Analysis of Silica-Coated Iron Oxide Nanoparticles

2018 ◽  
Author(s):  
Hattie Ring ◽  
Zhe Gao ◽  
Nathan D. Klein ◽  
Michael Garwood ◽  
John C. Bischof ◽  
...  
Keyword(s):  
Iron Oxide ◽  
Iron Oxide Nanoparticles ◽  
Hydrofluoric Acid ◽  
Inductively Coupled Plasma ◽  
Silica Shell ◽  
Oxide Nanoparticles ◽  
Inductively Coupled ◽  
Digestion Process ◽  
Plasma Methods ◽  
Iron Analysis

The Ferrozinen assay is applied as an accurate and rapid method to quantify the iron content of iron oxide nanoparticles (IONPs) and can be used in biological matrices. The addition of ascorbic aqcid accelerates the digestion process and can penetrate an IONP core within a mesoporous and solid silica shell. This new digestion protocol avoids the need for hydrofluoric acid to digest the surrounding silica shell and provides and accessible alternative to inductively coupled plasma methods. With the updated digestion protocol, the quantitative range of the Ferrozine assay is 1 - 14 ppm. <br>

Evaluation of the accuracy indicators in determination of the coating thickness by crater grinding method

2020 ◽  
Vol 86 (7) ◽  
pp. 39-44
Author(s):  
K. V. Gogolinsky ◽  
A. E. Ivkin ◽  
V. V. Alekhnovich ◽  
A. Yu. Vasiliev ◽  
A. E. Tyurnina ◽  
...  
Keyword(s):  
Coating Thickness ◽  
Functional Dependence ◽  
Measurement Procedure ◽  
Metrological Certification ◽  
Measuring Instruments ◽  
Properties Of Coatings ◽  
Special Equipment ◽  
Grinding Method ◽  
Accuracy Of Measurements ◽  
Wide Range

Thickness is one of the key indicators characterizing the quality and functional properties of coatings. Various indirect methods (electromagnetic, radiation, optical) most often used in practice to measure thickness are based on the functional dependence of a particular physical parameter of the system «base – coating» on the coating thickness. The sensitivity of these procedures to the certain properties of coatings imposes the main restriction to the accuracy of measurements. Therefore, the development and implementation of the approaches based on direct measurements of geometric parameters of the coating appears expedient. These methods often belong to the class of «destructive» and, in addition to measuring instruments, require the use of special equipment. To ensure the uniformity of measurements in the laboratory or technological control, these methods are isolated as a separate procedure (method) and must undergo metrological certification in accordance with GOST R 8.563–2009. We present implementation, metrological certification and practical application of the method for measuring thickness of coatings by crater-grinding method. The principles of technical implementation of test equipment, measurement procedure and calculation formulas are described. The results of evaluating the accuracy indicators of the proposed procedure by calculation and experimental methods are presented. In both cases, the relative error did not exceed 6%. The applicability of the developed technique is shown for a wide range of coating materials (from soft metals to superhard ceramics) of different thickness (with from units to hundreds of micrometers). Apart from the goals of process control and outgoing inspection, the method can be recommended as a reference measurement procedure for calibration of measures and adjusting samples for various types of thickness gauges.

Wear and microstructural properties of coatings on Weldox 700 steel

2020 ◽  
Vol 62 (6) ◽  
pp. 645-651 ◽  
Author(s):  
Cihan Özorak ◽  
Faik Okay ◽  
Ebru Özorak ◽  
Serkan Islak
Keyword(s):  
Microstructural Properties ◽  
Properties Of Coatings
Sign in / Sign up

Export Citation Format

Share Document