Minor closed loop control of stepping motors for use in high speed positioning

1981 ◽  
Vol 21 (3-4) ◽  
pp. 217-225
Author(s):  
J.W. Vraets ◽  
D. French
2014 ◽  
Vol 989-994 ◽  
pp. 3062-3069
Author(s):  
Heng Du ◽  
Bin Huang ◽  
Lin Wang ◽  
Shu Mei Chen

In the research and development of the precise closed-loop control system in large hydraulic press, the touch screen and PLC are frequently applied to design, debug and test for the system. Though a better closed-loop control characteristic can be acquired after repeated testing by this way, the comprehensive state data of hydraulic press are unable to get, which leads to a long research cycle and also restricts the maintenance and upgrade with the equipment in the later period. In order to obtain the whole state information of hydraulic press easily and effectively, a monitor system of precise closed-loop control in large hydraulic press is designed. Based on reasonable cooperation of sensors and high-speed data-acquisition card, high-speed and precise signal acquisition is realized. In addition, data-acquisition software program is designed base on LabVIEW, it can achieve the functions of collecting, storing, displaying and analyzing data. Through the real measuring and analyzing on a certain large ceramic hydraulic press, the status of key parameters can be acquired effectively during the whole pressing process. So the monitoring system supplies the significant data basis to the precise closed-loop control, accelerates the design and development of high characteristic precise closed-loop control and also strongly supports to the maintenance and upgrade with the equipments in the later period.


2010 ◽  
Vol 139-141 ◽  
pp. 1852-1855
Author(s):  
Cheng Xue ◽  
Yu Shi ◽  
Ding Fan ◽  
Hao Zhong ◽  
Ming Xiao Shi

Dual-bypass MIG welding (DB-GMAW) is a new kind of high speed MIG welding with three arcs. In order to monitor the weld process and control it, a high speed weld system of DB-GMAW was built. The system was run by LabVIEW programs, including getting data of system and control output signals. The test result of system showed that all equipments could be used in the same time. Beside images of weld pool and arc, the weld voltages and currents of every part had been acquired. The signals of bypass current and weld speed also had been input TIG welding sources and worktable motor successfully. Meanwhile, the high speed weld formation had a good quality, and all of these established the closed-loop control of high speed DB-GMAW.


2021 ◽  
pp. 1063293X2110019
Author(s):  
Fu-Shin Lee ◽  
Chen-I Lin ◽  
Zhi-Yu Chen ◽  
Ru-Xiao Yang

Based upon the CANopen communication protocol and the LabVIEW graphic programing procedures, this paper develops a closed-loop control architecture for a parallel three-axis (Delta) robotic arm mechanism. The accomplishments include prototyping a parallel three-axis robotic arm mechanism, assembling servomotors with associated encoders and gearsets, coding CANopen communication scripts for servomotor controllers and a host supervision GUI, coding forward/inverse kinematics scripts to compute the required servomotor rotations and the coordinates of a movable platform or the mechanism, coding tracking error compensation scripts for effective closed-loop griper control, and coding integration scripts to command and supervise the mechanism motion on the LabVIEW-based host GUI. During the development stage, this research designed and prototyped the parallel three-axis robotic arm mechanism based upon basic Delta robot kinematics. To control the mechanism effectively and accurately, this study implemented the CANopen communication protocol, which characterizes high speed and stable transmission. The protocol applies to the CANopen communication channels among the controllers and the host supervision GUI. On the LabVIEW development platform, the coded supervision GUI performs issuing/receiving messages to the CANopen-based controllers. The controllers excite the servomotors and actuate the parallel mechanism to track prescribed trajectories in a closed-loop control fashion. Meanwhile, an electromagnet attached to the movable platform of the robotic mechanism performs satisfactory picking/placing object actions.


1987 ◽  
Vol 107 (2) ◽  
pp. 271-278
Author(s):  
Tadashi Fukao ◽  
Akira Chiba ◽  
Mikihiko Matsui

2011 ◽  
Vol 467-469 ◽  
pp. 978-983
Author(s):  
Zhi Peng Ma ◽  
Xing Yu Zhao ◽  
Fu Jun Wang ◽  
Da Wei Zhang

To study the dynamic performance and control strategy of a kind of high speed precision positioning XY table with a new kind of decoupling mechanism, the electromechanical co-simulation model with three closed-loop control system using proportional–integral–derivative controller (PID controller) is constructed. By use of finite element analysis (FEA) and co-simulation method, the preloaded spring as the key component in the decoupling mechanism is optimized. The matching law of the spring stiffness and preload is presented. The decoupling mechanism influence on the dynamic performance of the XY table during the movement is fully discussed. Based on the electromechanical model, a three closed-loop control scheme with disturbance observer and feed-forward controller is proposed. Co-simulation results demonstrate the validity of the control strategy.


2011 ◽  
Vol 127 ◽  
pp. 126-129
Author(s):  
Li Hong Wang ◽  
Yue Ling Zhao

A stepping motor position closed loop control system was designed, which adopts displacement sensor to examine the position of the load. The system’s hardware constitute was given here, and the pulse control project was given at the same time. It uses the high-speed pulse output of PLC to export the adjustable frequency pulse. The adjustment of the frequency based on the error of initial value and actual value. On one hand, it can realize fast and accurate position control. On the other hand, it can overcome the weakness of losing step. Thus makes the system have better control function.


2018 ◽  
Author(s):  
Judith Lim ◽  
Tansu Celikel

AbstractObjectiveClose-loop control of brain and behavior will benefit from real-time detection of behavioral events to enable low-latency communication with peripheral devices. In animal experiments, this is typically achieved by using sparsely distributed (embedded) sensors that detect animal presence in select regions of interest. High-speed cameras provide high-density sampling across large arenas, capturing the richness of animal behavior, however, the image processing bottleneck prohibits real-time feedback in the context of rapidly evolving behaviors.ApproachHere we developed an open-source software, named PolyTouch, to track animal behavior in large arenas and provide rapid close-loop feedback in ~5.7 ms, ie. average latency from the detection of an event to analog stimulus delivery, e.g. auditory tone, TTL pulse, when tracking a single body. This stand-alone software is written in JAVA. The included wrapper for MATLAB provides experimental flexibility for data acquisition, analysis and visualization.Main resultsAs a proof-of-principle application we deployed the PolyTouch for place awareness training. A user-defined portion of the arena was used as a virtual target; visit (or approach) to the target triggered auditory feedback. We show that mice develop awareness to virtual spaces, tend to stay shorter and move faster when they reside in the virtual target zone if their visits are coupled to relatively high stimulus intensity (≥49dB). Thus, close-loop presentation of perceived aversive feedback is sufficient to condition mice to avoid virtual targets within the span of a single session (~20min).SignificanceNeuromodulation techniques now allow control of neural activity in a cell-type specific manner in spiking resolution. Using animal behavior to drive closed-loop control of neural activity would help to address the neural basis of behavioral state and environmental context-dependent information processing in the brain.


Sign in / Sign up

Export Citation Format

Share Document