Face stability analysis of EPB shield tunnel in dense sand stratum considering the evolution of failure pattern

2021 ◽  
Vol 130 ◽  
pp. 103890
Author(s):  
Cheng Cheng ◽  
Pengpeng Ni ◽  
Wen Zhao ◽  
Pengjiao Jia ◽  
Song Gao ◽  
...  
2019 ◽  
Vol 2019 ◽  
pp. 1-9
Author(s):  
Weiping Liu ◽  
Shaofeng Wan ◽  
Xinqiang Song ◽  
Mingfu Fu ◽  
Lina Hu

The sufficient support pressure is essential to guarantee the safe construction of shield tunnel. Thus, it is necessary to analyze the stability and assess the limit support pressure of the tunnel face. The main methods for face stability analysis mostly focused on finite element method, limit equilibrium method, and numerical simulation method. In this paper, the slip line method is applied to analyze the stability of the tunnel face. The soil is supposed as ideal isotropic, homogeneous, and incompressible continuous material, which obeys the Mohr–Coulomb yield criterion. A mathematical model of the limit equilibrium boundary value problem is established. The slip line method is used to solve the slip line field and stress field of the soil behind the tunnel face. Limit support pressure and failure mechanism of the tunnel face are then obtained. In addition, comparisons between the results of this study and those of existing approach are performed, and the influence factors are also discussed. The results show that the slip line method is proven to be reliable for the evaluation of limit support pressure of the tunnel face stability.


2014 ◽  
Vol 10 (5) ◽  
pp. 683-692 ◽  
Author(s):  
R. P. Chen ◽  
L. J. Tang ◽  
X. S. Yin ◽  
Y. M. Chen ◽  
X. C. Bian

2013 ◽  
Vol 2013 ◽  
pp. 1-11 ◽  
Author(s):  
Yuyou Yang ◽  
Qinghong Zhou ◽  
Hongan Li ◽  
Xuegang Huang ◽  
Xiaoming Tu

This paper focuses on the face stability analysis of Double-O-Tube shield tunnel. This kind of analysis is significant to ensure the safety of workers and reduce the influence on the surrounding environment. The key point of the stability analysis is to determine the supporting pressure applied to the face by the shield. A collapse failure will occur when the supporting pressure is not sufficient to prevent the movement of the soil mass towards the tunnel. A three-dimensional collapse failure mechanism was presented in this paper. Based on the mechanism of a single circular shield tunnel, the mechanism of Double-O-Tube shield tunnel was established by using the fact that both of the mechanisms are symmetrical. Then by means of the kinematic theorem of limit analysis, the numerical results were obtained, and a design chart was provided. The finite difference software FLAC3D was applied to investigate the face failure mechanism of DOT shield tunnel established in this paper; the critical supporting pressures of the collapse failure mechanism in different strata (sand and silt) were calculated. Through comparative analysis, the theoretical values were very close to the numerical values. This shows that the face failure mechanism of DOT shield tunnel is reasonable, and it can be applied to the sand and silt strata.


2021 ◽  
Vol 112 ◽  
pp. 103904
Author(s):  
Fabricio Fernández ◽  
Jhonatan E.G. Rojas ◽  
Eurípedes A. Vargas ◽  
Raquel Q. Velloso ◽  
Daniel Dias

2021 ◽  
Vol 11 (7) ◽  
pp. 2995
Author(s):  
Tae-Hwan Kim ◽  
In-Mo Lee ◽  
Hee-Young Chung ◽  
Jeong-Jun Park ◽  
Young-Moo Ryu

Soil conditioning is a key factor in increasing tunnel face stability and extraction efficiency of excavated soil when excavating tunnels using an earth pressure balance (EPB) shield tunnel boring machine (TBM). Weathered granite soil, which is abundant in the Korean Peninsula (also in Japan, Hong Kong, and Singapore), has different characteristics than sand and clay; it also has particle-crushing characteristics. Conditioning agents were mixed with weathered granite soils of different individual particle-size gradations, and three characteristics (workability, permeability, and compressibility) were evaluated to find an optimal conditioning method. The lower and upper bounds of the water content that are needed for a well-functioning EPB shield TBM were also proposed. Through a trial-and-error experimental analysis, it was confirmed that soil conditioning using foam only was possible when the water content was controlled within the allowable range, that is, between the upper and lower bounds; when water content exceeded the upper bound, soil conditioning with solidification agents was needed along with foam. By taking advantage of the particle-crushing characteristics of the weathered granite soil, it was feasible to adopt the EPB shield TBM even when the soil was extremely coarse and cohesionless by conditioning with polymer slurries along with foam. Finally, the application ranges of EPB shield TBM in weathered granite soil were proposed; the newly proposed ranges are wider and expanded to coarser zones compared with those proposed so far.


Author(s):  
Ping Lu ◽  
Dajun Yuan ◽  
Jian Chen ◽  
Dalong Jin ◽  
Jun Wu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document