scholarly journals Simplified metrics for advanced window systems. Effects on the estimation of energy use for space heating and cooling

2017 ◽  
Vol 122 ◽  
pp. 613-618 ◽  
Author(s):  
Francesco Goia ◽  
Martina Romeo ◽  
Marco Perino
Keyword(s):  
Energy Use ◽  
Space Heating ◽  
Heating And Cooling ◽  
Window Systems

scholarly journals A Complementary Approach to Traditional Energy Balances for Assessing Energy Efficiency Measures in Final Uses: The Case of Space Heating and Cooling in Argentina

2020 ◽  
Vol 12 (16) ◽  
pp. 6563
Author(s):  
Roque G Stagnitta ◽  
Matteo V Rocco ◽  
Emanuela Colombo
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Primary Energy ◽  
Embodied Energy ◽  
Space Heating ◽  
Output Analysis ◽  
Final Energy ◽  
Heating And Cooling ◽  
Energy Balances ◽  
The Impact

Energy balances have been historically conceived based on a supply-side perspective, providing neither detailed information about energy conversion into useful services nor the effects that may be induced by the application of policies in other sectors to energy consumption. This article proposes an approach to a thorough assessment of the impact of efficiency policies on final energy uses, focusing on residential space heating and cooling, and capable of: (1) quantifying final useful services provided and (2) accounting for the global impact of efficiency policies on final energy use, taking advantage of Input–Output analysis. This approach is applied in five cities of Argentina. Firstly, the quantity of energy service provided (i.e., level of thermal comfort) for each city is evaluated and compared with the defined target. It is found out that heating comfort is guaranteed approximately as established, whereas in the cooling case the provision is twice the established level. Secondly, primary energy consumption of heating and cooling services is evaluated before and after different efficiency improvement policies. The results show that the major primary energy saving (52%) is obtained from the upgrading appliances scenario and reflect the importance of accounting for embodied energy in goods and services involved in interventions.

COMPARISON OF COOLING AND HEATING REQUIREMENTS BETWEEN BRICK VENEER AND FIBRO CEMENT WALLING SYSTEM

2017 ◽  
Vol 4 (1) ◽  
Author(s):  
Swapan Saha ◽  
Dharma Hagare ◽  
Jiaqi Zhou ◽  
Md Kamrul Hassan
Keyword(s):  
Energy Consumption ◽  
Energy Cost ◽  
Energy Use ◽  
Net Present Value ◽  
Space Heating ◽  
Heating And Cooling ◽  
Space Cooling ◽  
Brick Veneer ◽  
Save Energy ◽  
Modern House

Space cooling and heating in residential sector is significant contributor to energy consumption in Australia. Therefore, it is important to reduce the cooling and heating requirements. The selection of a good walling system helps to save energy by homes. This research compared the thermal efficiency of a modern house (constructed using brick veneer walls with concrete floor slab) with an old house (constructed using fibro cement walls raised timber floor) using the AccuRate simulation tool. A standard house with two living rooms, one kitchen, one laundry and four bedrooms are simulated in a Sydney Suburb in Australia. It was found that modern house showed lower inside temperature variation than the old house all year around. The results also showed that the modern house has a lower energy consumption for space heating and cooling than the old house. The annual energy use for space heating and cooling in both the modern house and old house were 5197 kWh and 15,712 kWh respectively. Moreover, the annual energy costs were found to be $1,403 and $4,242 respectively for modern and old houses. The modern brick veneer house saved about 33 % of energy compared to old old house. When the net present value of the energy cost for f both houses over 50 years is computed, the energy cost of modern house was found to be $25,629 while it of old house is was $77,488 for the old house.

scholarly journals THE SIMULATION ANALYSIS OF A PROPOSED ‘HYDRONIC RADIATOR’ SYSTEM TOWARDS LOW COST HOUSING OPERATION IN TEMPERATE AND HOT TROPICAL CLIMATES

2020 ◽  
Vol 15 (1) ◽  
pp. 73-86
Author(s):  
Masa Noguchi ◽  
Koon Beng Ooi
Keyword(s):  
Energy Use ◽  
Simulation Analysis ◽  
Low Cost ◽  
Heat Removal ◽  
Space Heating ◽  
Geothermal Heat ◽  
Renewable Sources ◽  
Heating And Cooling ◽  
Test House ◽  
Flow Through

ABSTRACT Fuel poverty is one of the global concerns affecting not only users' financial capacity or affordability for maintaining housing operation but also the occupants' health and wellbeing. Space heating and cooling require a relatively large amount of domestic energy use in housing. Therefore, this study was formed with the aim to propose an innovative approach to utilising free, clean renewable sources of energy applicable to the space heating and cooling of housing in both cold and hot regions. Accordingly, housing test facilities based in Melbourne, Australia, and Kuching, Malaysia, were selected and used for this study that examined the thermal performance of a proposed ‘hydronic radiator’ (HR) system through simulation and onsite measurements. The geothermal heat capacity of a ‘vertical ground heat exchanger’ (VGHE) installed in the house in Melbourne was examined previously by the authors and the VGHE measured data was also applied to this HR performance simulation. The water that circulates through the HRs is heated by sunlight and VGHE or cooled by night sky radiation. This study drew conclusions that the sole utilisation of renewable sources through these proposed HR space heating and cooling systems can provide thermally accessible or comfortable indoor living environments in both heating or cooling dominant regions. Thus, fuel poverty issues may be alleviated through HR system application. The HRs can remove a ‘sensible’ portion of metabolic heat, but they cannot effectively contribute to the ‘latent’ heat removal. Thus, the future potential use or effect of ‘flow-through’ HRs, which are integrated into a underfloor air distribution (UFAD) plenum, was also dsicussed in this study. In the test house located in Melbourne, the flow-through HR UFAD system is currently under development. Therefore, the performance will be measured once the system has come into operation for further testing.

scholarly journals Gender and Energy for Space Heating and Cooling

2020 ◽  
Vol 15 (3) ◽  
pp. 368-374
Author(s):  
Prerana Tuladhar
Keyword(s):  
Energy Consumption ◽  
Energy Use ◽  
Residential Buildings ◽  
Energy Sector ◽  
Space Heating ◽  
Consumption Pattern ◽  
Gender Relation ◽  
The Sustainable Development ◽  
Heating And Cooling ◽  
Energy Consumption Pattern

Energy is one of the crucial aspects now-a-days to be considered from the household chores to the educational, transportation, industrial and many other sectors. Apart from cooking, space heating and cooling also have greater impact as buildings consume about 40% of world’s energy use and major part of energy is used for space heating and cooling [1]. Gender is another aspect that should be taken in to consideration in the energy sector. Discrimination between men and women, either it may be in the knowledge regarding energy sector, profession, application and practices etc. is seen in our society. Therefore, this paper seeks to investigate the impacts of space heating and cooling in the energy consumption pattern of Residential buildings. This paper explores how the gender issues in the energy sector can be addressed and how can it lead towards the sustainable development of the society and then nation. At the same time, paper highlights the changes and improvements in the energy consumption pattern with the enrollment of women in the energy sector. The conclusions are derived from the several literature studies and explorative data analysis with the concern of gender relation with the energy efficiency in the space heating and cooling of residential buildings.

Monthly utilisation factors for building energy calculations

2016 ◽  
Vol 38 (3) ◽  
pp. 318-326 ◽  
Author(s):  
Roger Hitchin
Keyword(s):  
Linear Model ◽  
Energy Use ◽  
Potential Temperature ◽  
Energy Performance ◽  
Space Heating ◽  
Base Temperature ◽  
Outdoor Temperature ◽  
Energy Performance Of Buildings ◽  
Heating And Cooling ◽  
The Mean

Monthly utilisation factors are the basis of many procedures for calculation of monthly heating or cooling requirements for buildings, notably in the procedure described in standard ISO 13790:2008 ‘Energy performance of buildings – Calculation of energy use for space heating and cooling’, which is widely used for the implementation of the Energy Performance of Buildings Directive in Europe. The procedures used to determine the values of the factors are invariably empirical rather than being derived from first principles, with the principal parameter being the ratio between monthly mean heat gains and monthly mean heat losses for the space in question. This article shows that this ratio is inherently insufficient to define the values and illustrates how months with similar values of the ratio can have different utilisation factors. It also shows that, if daily heating requirement is proportional to outdoor temperature, the key building parameter needed to determine the utilisation factor is the familiar base temperature. The base temperature can be expressed in terms of the monthly gain: loss ratio and the mean indoor and external temperatures: the day-to-day frequency distributions of outdoor temperature is also important. Finally, the article demonstrates that, for many situations, the ISO 13790 procedure and a linear model with residuals produce similar estimates of monthly heating requirement. However, this is not true towards the upper end of its observed range. In this situation, the linear model produces lower values for utilisation factors and correspondingly higher heating (and cooling) requirements. This effect is most marked when the mean indoor and outdoor temperatures are close or the space is well-insulated (causing a given heat gain to represent a higher potential temperature difference). Practical application: Monthly utilisation factors are the basis of many procedures for the calculation of monthly heating or cooling requirements for buildings, notably in the procedure described in standard ISO 13790:2008 ‘Energy performance of buildings – Calculation of energy use for space heating and cooling’, which is widely used for the implementation of the Energy Performance of Buildings Directive in Europe. This article shows that an alternative approach based on the concept of energy signatures, although producing very similar results in many situations, is a more robust and extendable basis for monthly heating and cooling energy demand calculations.

Heat Gains, Heating and Cooling in Nordic Housing with Electrical Space Heating

2015 ◽  
Vol 10 (5) ◽  
pp. 599
Author(s):  
Cristina E. Molina ◽  
Matti Lehtonen ◽  
Merkebu Degefa
Keyword(s):  
Space Heating ◽  
Heating And Cooling

Mine water as a resource: space heating and cooling via use of heat pumps

2003 ◽  
Vol 11 (2) ◽  
pp. 191-198 ◽  
Author(s):  
David Banks ◽  
Helge Skarphagen ◽  
Robin Wiltshire ◽  
Chris Jessop
Keyword(s):  
Mine Water ◽  
Heat Pumps ◽  
Space Heating ◽  
Heating And Cooling ◽  
Resource Space
Sign in / Sign up

Export Citation Format

Share Document