Separation of Arsenic and Extraction of Zinc and Copper from High-arsenic Copper Smelting Dusts by Alkali Leaching Followed by Sulfuric Acid Leaching

Author(s):  
Yuhui Zhang ◽  
Xiaoyan Feng ◽  
Long Qian ◽  
Jin Luan ◽  
Bingjie Jin
Metallurgist ◽  
2016 ◽  
Vol 60 (3-4) ◽  
pp. 456-459 ◽  
Author(s):  
K. A. Karimov ◽  
S. S. Naboichenko

2013 ◽  
Vol 634-638 ◽  
pp. 3363-3367
Author(s):  
He Fei Zhao ◽  
Shu Ming Wen ◽  
Shao Jun Bai ◽  
Ci Yun Chen ◽  
Qi Cheng Feng

The experimental study on removal of arsenic from sulfuric-acid residue of high-arsenic was conducted in this paper. Reduction roasting–magnetic separation and sulfuric acid leaching were discussed, and the results showed that the harmful impurity arsenic can't be effectively removed by the reduction roasting-magnetic separation process from sulfuric-acid residue. The content of arsenic would be enriched with the growth of magnetic iron grade, while the effect of the arsenic removal was obvious for sulfuric acid leaching. The leach residue, in which the content of arsenic was only 0.24% with 92.29% of arsenic leaching rate was obtained from the raw ore with 2.78% of arsenic by the sulfuric acid leaching process. And the iron grade of sulfuric-acid residue reached 61.88% while content of non-ferrous metal was very Low, which can be used as a raw material of iron-smelting. This study provided a certain amount of technical support for the similar high arsenic sulfuric-acid residue recycling.


Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 810
Author(s):  
Zhanyong Guo ◽  
Ping Guo ◽  
Guang Su ◽  
Fachuang Li

In this paper, nickel-containing residue, a typical solid waste produced in the battery production process, was used to study the cavitation characteristics of ultrasonic waves in a liquid–solid reaction. The ultrasonically-enhanced leaching technology for multicomponent and complex nickel-containing residue was studied through systematic ultrasonic-conventional comparative experiments. An ultrasonic leaching kinetics model was established which provided reliable technological guidance and basic theory for the comprehensive utilization of nickel-containing residue. In the study, it was found that ultrasonically-enhanced leaching for 40 min obtained the same result as conventional leaching for 80 min, and the Ni extraction degree reached more than 95%. According to the kinetic fitting of the leaching process, it was found that the sulfuric acid leaching process belonged to the diffusion-controlled model of solid product layers under conventional and ultrasonic conditions, and the activation energy of the reaction was Ea1 = 17.74 kJ/mol and Ea2 = 5.04 kJ/mol, respectively.


2021 ◽  
pp. 105799
Author(s):  
Chengjin Xu ◽  
Ling Li ◽  
Miaomiao Zhang ◽  
Xiao Meng ◽  
Xiujing Peng ◽  
...  

2013 ◽  
Vol 789 ◽  
pp. 522-530 ◽  
Author(s):  
Latifa Hanum Lalasari ◽  
Rudi Subagja ◽  
Akhmad Herman Yuwono ◽  
Florentinus Firdiyono ◽  
Sri Harjanto ◽  
...  

lmenite (FeO.TiO2) ore from Bangka island-Indonesia is a potential raw material for synthesizing titanium dioxide (TiO2), which can be used further as pigmen and photocatalyst. The fabrication of TiO2 particles from ilmenite can be carried out through the solvent extraction using sulfuric acid route. Therefore, the solubility of the ilmenite ore in sulfuric acid environment is one of the key factors to obtain the desired TiO2 particles. The current research is aimed at comparing the solubility of pristine Bangka ilmenite ore with that of precedingly decomposed by sodium hidroxide (NaOH) in pressurized and atmospheric reflux reactors. The dissolution of both precursors was carried out in those reactors under various temperatures of 75, 100, 125, 150 and 175°C. The results showed that the optimum dilution was achieved at 150°C. The obtained recovery of ilmenite was 88.8 % for the pressurized reactor and 75.5% for the atmospheric reflux reactor. The solubility of titanium (Ti) element increased steadily to reach a recovery of 68% at 150°C and decreased significantly afterwards. It was also found that the increase of iron (Fe) element solubility was proportional to the increase of processing temperatures.


Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1392
Author(s):  
Alidor Shikika ◽  
Francois Zabene ◽  
Fabrice Muvundja ◽  
Mac C. Mugumaoderha ◽  
Julien L. Colaux ◽  
...  

A novel approach for Ta and Nb extraction consisting of the pre-treatment of a coltan-bearing ore with an ammonium bifluoride sub-molten salt and subsequent acid leaching has been studied. The effects from ore granulometry, ammonium bifluoride (ABF) to ore mass ratio, temperature and duration of fluorination on the degree of Ta and Nb extraction were examined. The ABF to ore ratio and process temperature were found to have the most pronounced impact on extraction efficiency. The following optimal process conditions were determined: ore granulometric fraction (−75 + 45 µm), ABF-ore (5/1), fluorination temperature (200 °C) and fluorination time (2.5 h). Maintaining these parameters enabled about 94% of Ta and 95% of Nb to be brought into solution during the sulfuric-acid-leaching stage. A comparison of the proposed method with previously reported studies suggests that due to the effects of mechanical agitation and the recirculation of the HF-containing gaseous phase back into the process, the dosage rate of ABF at the fluorination stage could be reduced significantly without sacrificing the overall recovery of Ta and Nb. In such a way, the approach could offer added environmental benefits since release of fluoride-containing effluents into the environment could be limited.


2021 ◽  
Author(s):  
Sukhbat Sandag-Ochir ◽  
Zagarzusem Tsedendamba ◽  
Orgilbayar Batkhuyag ◽  
Jargalsaikhan Lkhasuren ◽  
Khasbaatar Dashkhuu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document