Direct numerical simulation of hypersonic turbulent boundary layers. Part 3. Effect of Mach number

2011 ◽  
Vol 672 ◽  
pp. 245-267 ◽  
Author(s):  
L. DUAN ◽  
I. BEEKMAN ◽  
M. P. MARTÍN
Keyword(s):  
Mach Number ◽  
Boundary Layers ◽  
Large Scale ◽  
Free Stream ◽  
Turbulent Boundary Layers ◽  
Thermodynamic Quantities ◽  
Reynolds Analogy ◽  
Number Range ◽  
Free Stream Mach Number ◽  
Mach Numbers

In this paper, we perform direct numerical simulations (DNS) of turbulent boundary layers with nominal free-stream Mach number ranging from 0.3 to 12. The main objective is to assess the scalings with respect to the mean and turbulence behaviours as well as the possible breakdown of the weak compressibility hypothesis for turbulent boundary layers at high Mach numbers (M > 5). We find that many of the scaling relations, such as the van Driest transformation for mean velocity, Walz's relation, Morkovin's scaling and the strong Reynolds analogy, which are derived based on the weak compressibility hypothesis, remain valid for the range of free-stream Mach numbers considered. The explicit dilatation terms such as pressure dilatation and dilatational dissipation remain small for the present Mach number range, and the pressure–strain correlation and the anisotropy of the Reynolds stress tensor are insensitive to the free-stream Mach number. The possible effects of intrinsic compressibility are reflected by the increase in the fluctuations of thermodynamic quantities (p′rms/pw, ρ′rms/ρ, T′rms/T) and turbulence Mach numbers (Mt, M′rms), the existence of shocklets, the modification of turbulence structures (near-wall streaks and large-scale motions) and the variation in the onset of intermittency.

Compressibility and Variable Density Effects in Turbulent Boundary layers

2006 ◽  
Vol 129 (4) ◽  
pp. 441-448 ◽  
Author(s):  
Kunlun Liu ◽  
Richard H. Pletcher
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Turbulent Boundary Layer ◽  
Boundary Layers ◽  
Wall Temperature ◽  
Stokes Equations ◽  
Variable Density ◽  
Turbulent Boundary Layers ◽  
Reynolds Analogy ◽  
Density Effects

Two compressible turbulent boundary layers have been calculated by using direct numerical simulation. One case is a subsonic turbulent boundary layer with constant wall temperature for which the wall temperature is 1.58 times the freestream temperature and the other is a supersonic adiabatic turbulent boundary layer subjected to a supersonic freestream with a Mach number 1.8. The purpose of this study is to test the strong Reynolds analogy (SRA), the Van Driest transformation, and the applicability of Morkovin’s hypothesis. For the first case, the influence of the variable density effects will be addressed. For the second case, the role of the density fluctuations, the turbulent Mach number, and dilatation on the compressibility will be investigated. The results show that the Van Driest transformation and the SRA are satisfied for both of the flows. Use of local properties enable the statistical curves to collapse toward the corresponding incompressible curves. These facts reveal that both the compressibility and variable density effects satisfy the similarity laws. A study about the differences between the compressibility effects and the variable density effects associated with heat transfer is performed. In addition, the difference between the Favre average and Reynolds average is measured, and the SGS terms of the Favre-filtered Navier-Stokes equations are calculated and analyzed.

scholarly journals Nonlinear unsteady streaks engendered by the interaction of free-stream vorticity with a compressible boundary layer

2017 ◽  
Vol 817 ◽  
pp. 80-121 ◽  
Author(s):  
Elena Marensi ◽  
Pierre Ricco ◽  
Xuesong Wu
Keyword(s):  
Boundary Layer ◽  
Mach Number ◽  
Wind Tunnel ◽  
Boundary Layers ◽  
Free Stream ◽  
Nonlinear Interactions ◽  
Compressible Boundary Layer ◽  
Displacement Effect ◽  
Free Stream Mach Number ◽  
First Time

The nonlinear response of a compressible boundary layer to unsteady free-stream vortical fluctuations of the convected-gust type is investigated theoretically and numerically. The free-stream Mach number is assumed to be of $O(1)$ and the effects of compressibility, including aerodynamic heating and heat transfer at the wall, are taken into account. Attention is focused on low-frequency perturbations, which induce strong streamwise-elongated components of the boundary-layer disturbances, known as streaks or Klebanoff modes. The amplitude of the disturbances is intense enough for nonlinear interactions to occur within the boundary layer. The generation and nonlinear evolution of the streaks, which acquire an $O(1)$ magnitude, are described on a self-consistent and first-principle basis using the mathematical framework of the nonlinear unsteady compressible boundary-region equations, which are derived herein for the first time. The free-stream flow is studied by including the boundary-layer displacement effect and the solution is matched asymptotically with the boundary-layer flow. The nonlinear interactions inside the boundary layer drive an unsteady two-dimensional flow of acoustic nature in the outer inviscid region through the displacement effect. A close analogy with the flow over a thin oscillating airfoil is exploited to find analytical solutions. This analogy has been widely employed to investigate steady flows over boundary layers, but is considered herein for the first time for unsteady boundary layers. In the subsonic regime the perturbation is felt from the plate in all directions, while at supersonic speeds the disturbance only propagates within the dihedron defined by the Mach line. Numerical computations are performed for carefully chosen parameters that characterize three practical applications: turbomachinery systems, supersonic flight conditions and wind tunnel experiments. The results show that nonlinearity plays a marked stabilizing role on the velocity and temperature streaks, and this is found to be the case for low-disturbance environments such as flight conditions. Increasing the free-stream Mach number inhibits the kinematic fluctuations but enhances the thermal streaks, relative to the free-stream velocity and temperature respectively, and the overall effect of nonlinearity becomes weaker. An abrupt deviation of the nonlinear solution from the linear one is observed in the case pertaining to a supersonic wind tunnel. Large-amplitude thermal streaks and the strong abrupt stabilizing effect of nonlinearity are two new features of supersonic flows. The present study provides an accurate signature of nonlinear streaks in compressible boundary layers, which is indispensable for the secondary instability analysis of unsteady streaky boundary-layer flows.

Investigation of Flat-Plate Hypersonic, Turbulent Boundary Layers With Heat Transfer

1961 ◽  
Vol 28 (3) ◽  
pp. 323-329 ◽  
Author(s):  
Eva M. Winkler
Keyword(s):  
Heat Transfer ◽  
Boundary Layer ◽  
Friction Coefficient ◽  
Mach Number ◽  
Flat Plate ◽  
Skin Friction ◽  
Boundary Layers ◽  
Skin Friction Coefficient ◽  
Turbulent Boundary Layers ◽  
Reynolds Analogy

Naturally turbulent boundary layers on a cooled flat plate have been investigated at several distances from the leading edge of the plate at a Mach number of 5.2 for three rates of steady-state heat transfer to the surface. Measurements of Pitot and static pressures and of total and wall temperatures made it possible to compute velocity profiles, static-temperature profiles, and boundary-layer parameters without resorting to assumptions. The data demonstrate that the Reynolds analogy between skin friction and heat transfer is valid for all conditions of the present experiments. With increasing rate of heat transfer to the surface, the skin-friction coefficient was found to decrease, a phenomenon opposite to that predicted by theories and empirical relations. On the basis of the present data and other published results of compressible and incompressible turbulent boundary-layer skin friction, a simple relation was devised which describes closely the variation of the skin-friction coefficient with Mach number, heat-transfer rate, and momentum-thickness Reynolds number.

scholarly journals Interactions of large-scale free-stream turbulence with turbulent boundary layers

2016 ◽  
Vol 802 ◽  
pp. 79-107 ◽  
Author(s):  
Eda Dogan ◽  
Ronald E. Hanson ◽  
Bharathram Ganapathisubramani
Keyword(s):  
Boundary Layer ◽  
Turbulent Boundary Layer ◽  
Boundary Layers ◽  
Large Scale ◽  
Free Stream ◽  
Turbulent Boundary Layers ◽  
Scale Interactions ◽  
Free Stream Turbulence ◽  
Small Scales ◽  
Near Wall

The scale interactions occurring within a turbulent boundary layer are investigated in the presence of free-stream turbulence. The free-stream turbulence is generated by an active grid. The free stream is monitored by a single-component hot-wire probe, while a second probe is roved across the height of the boundary layer at the same streamwise location. Large-scale structures occurring in the free stream are shown to penetrate the boundary layer and increase the streamwise velocity fluctuations throughout. It is speculated that, depending on the extent of the penetration, i.e. based on the level of free-stream turbulence, the near-wall turbulence production peaks at different wall-normal locations than the expected location of $y^{+}\approx 15$ for a canonical turbulent boundary layer. It is shown that the large scales dominating the log region have a modulating effect on the small scales in the near-wall region; this effect becomes more significant with increasing turbulence in the free stream, i.e. similarly increasing $Re_{\unicode[STIX]{x1D706}_{0}}$. This modulating interaction and its Reynolds-number trend have similarities with canonical turbulent boundary layers at high Reynolds numbers where the interaction between the large scales and the envelope of the small scales exhibits a pure amplitude modulation (Hutchins & Marusic, Phil. Trans. R. Soc. Lond. A, vol. 365 (1852), 2007, pp. 647–664; Mathis et al., J. Fluid Mech., vol. 628, 2009, pp. 311–337). This similarity has encouraging implications towards generalising scale interactions in turbulent boundary layers.

Direct simulation of turbulent supersonic boundary layers by an extended temporal approach

2001 ◽  
Vol 429 ◽  
pp. 187-216 ◽  
Author(s):  
THIERRY MAEDER ◽  
NIKOLAUS A. ADAMS ◽  
LEONHARD KLEISER
Keyword(s):  
Numerical Simulation ◽  
Mach Number ◽  
Direct Numerical Simulation ◽  
Boundary Layers ◽  
Stokes Equations ◽  
Navier Stokes ◽  
Mean Flow ◽  
Navier Stokes Equations ◽  
Number Range ◽  
Mach Numbers

The present paper addresses the direct numerical simulation of turbulent zero-pressure-gradient boundary layers on a flat plate at Mach numbers 3, 4.5 and 6 with momentum-thickness Reynolds numbers of about 3000. Simulations are performed with an extended temporal direct numerical simulation (ETDNS) method. Assuming that the slow streamwise variation of the mean boundary layer is governed by parabolized Navier–Stokes equations, the equations solved locally in time with a temporal DNS are modified by a distributed forcing term so that the parabolized Navier–Stokes equations are recovered for the spatial average. The correct mean flow is obtained without a priori knowledge, the streamwise mean-flow evolution being approximated from its upstream history. ETDNS reduces the computational effort by up to two orders of magnitude compared to a fully spatial simulation.We present results for a constant wall temperature Tw chosen to be equal to its laminar adiabatic value, which is about 2.5 T∞, 4.4 T∞ and 7 T∞, respectively, where T∞ is the free-stream temperature for the three Mach numbers considered. The simulations are initialized with transition-simulation data or with re-scaled turbulent data at different parameters. We find that the ETDNS results closely match experimental mean-flow data. The van Driest transformed velocity profiles follow the incompressible law of the wall with small logarithmic regions.Of particular interest is the significance of compressibility effects in a Mach number range around the limit of M∞ ≃ 5, up to which Morkovin's hypothesis is believed to be valid. The results show that pressure dilatation and dilatational dissipation correlations are small throughout the considered Mach number range. On the other hand, correlations derived from Morkovin's hypothesis are not necessarily valid, as is shown for the strong Reynolds analogy.

366 Study on properties of turbulent boundary layers affected by large-scale free-stream turbulence

2011 ◽  
Vol 2011.60 (0) ◽  
pp. _366-1_-_366-2_
Author(s):  
Saori TSUKUDA ◽  
Hiroki SUZUKI ◽  
Kouji NAGATA ◽  
Tomoyuki KITAYAMA ◽  
Yasuhiko SAKAI ◽  
...  
Keyword(s):  
Boundary Layers ◽  
Large Scale ◽  
Free Stream ◽  
Turbulent Boundary Layers ◽  
Scale Free ◽  
Free Stream Turbulence

Conditional statistics and flow structures in turbulent boundary layers buffeted by free-stream disturbances

2019 ◽  
Vol 866 ◽  
pp. 526-566 ◽  
Author(s):  
Jiho You ◽  
Tamer A. Zaki
Keyword(s):  
Boundary Layer ◽  
Shear Stress ◽  
Kinetic Energy ◽  
Boundary Layers ◽  
Large Scale ◽  
Free Stream ◽  
Turbulent Boundary Layers ◽  
Direct Numerical Simulations ◽  
Free Stream Turbulence ◽  
Conditional Statistics

Direct numerical simulations are performed to study zero-pressure-gradient turbulent boundary layers beneath quiescent and vortical free streams. The inflow boundary layer is computed in a precursor simulation of laminar-to-turbulence transition, and the free-stream vortical forcing is obtained from direct numerical simulations of homogeneous isotropic turbulence. A level-set approach is employed in order to objectively distinguish the boundary-layer and free-stream fluids, and to accurately evaluate their respective contributions to flow statistics. When free-stream turbulence is present, the skin friction coefficient is elevated relative to its value in the canonical boundary-layer configuration. An explanation is provided in terms of an increase in the power input into production of boundary-layer turbulence kinetic energy. This increase takes place deeper than the extent of penetration of the external perturbations towards the wall, and also despite the free-stream perturbations being void of any Reynolds shear stress. Conditional statistics demonstrate that the free-stream turbulence has two effects on the boundary layer: one direct and the other indirect. The low-frequency components of the free-stream turbulence penetrate the logarithmic layer. The associated wall-normal Reynolds stress acts against the mean shear to enhance the shear stress, which in turn enhances turbulence production. This effect directly enlarges the scale and enhances the energy of outer large-scale motions in the boundary layer. The second, indirect effect is the influence of these newly formed large-scale structures. They modulate the near-wall shear stress and, as a result, increase the turbulence kinetic energy production in the buffer layer, which is deeper than the extent of penetration of free-stream turbulence towards the wall.

Aero-optics of subsonic turbulent boundary layers

2012 ◽  
Vol 696 ◽  
pp. 122-151 ◽  
Author(s):  
Kan Wang ◽  
Meng Wang
Keyword(s):  
Boundary Layer ◽  
Reynolds Number ◽  
Boundary Layers ◽  
Dominant Role ◽  
Elevation Angle ◽  
Turbulent Boundary Layers ◽  
Density Field ◽  
Small Scale ◽  
Number Range ◽  
Scale Turbulence

AbstractCompressible large-eddy simulations are carried out to study the aero-optical distortions caused by Mach 0.5 flat-plate turbulent boundary layers at Reynolds numbers of ${\mathit{Re}}_{\theta } = 875$, 1770 and 3550, based on momentum thickness. The fluctuations of refractive index are calculated from the density field, and wavefront distortions of an optical beam traversing the boundary layer are computed based on geometric optics. The effects of aperture size, small-scale turbulence, different flow regions and beam elevation angle are examined and the underlying flow physics is analysed. It is found that the level of optical distortion decreases with increasing Reynolds number within the Reynolds-number range considered. The contributions from the viscous sublayer and buffer layer are small, while the wake region plays a dominant role, followed by the logarithmic layer. By low-pass filtering the fluctuating density field, it is shown that small-scale turbulence is optically inactive. Consistent with previous experimental findings, the distortion magnitude is dependent on the propagation direction due to anisotropy of the boundary-layer vortical structures. Density correlations and length scales are analysed to understand the elevation-angle dependence and its relation to turbulence structures. The applicability of Sutton’s linking equation to boundary-layer flows is examined, and excellent agreement between linking equation predictions and directly integrated distortions is obtained when the density length scale is appropriately defined.

Effects of Embedded Vortices on Film-Cooled Turbulent Boundary Layers

1989 ◽  
Vol 111 (1) ◽  
pp. 71-77 ◽  
Author(s):  
P. M. Ligrani ◽  
A. Ortiz ◽  
S. L. Joseph ◽  
D. L. Evans
Keyword(s):  
Heat Transfer ◽  
Boundary Layers ◽  
Film Cooling ◽  
Free Stream ◽  
Flow Behavior ◽  
Local Heat Transfer ◽  
Local Heat ◽  
Turbulent Boundary Layers ◽  
Stream Velocity ◽  
Longitudinal Vortices

Heat transfer effects of longitudinal vortices embedded within film-cooled turbulent boundary layers on a flat plate were examined for free-stream velocities of 10 m/s and 15 m/s. A single row of film-cooling holes was employed with blowing ratios ranging from 0.47 to 0.98. Moderate-strength vortices were used with circulating-to-free stream velocity ratios of −0.95 to −1.10 cm. Spatially resolved heat transfer measurements from a constant heat flux surface show that film coolant is greatly disturbed and that local Stanton numbers are altered significantly by embedded longitudinal vortices. Near the downwash side of the vortex, heat transfer is augmented, vortex effects dominate flow behavior, and the protection from film cooling is minimized. Near the upwash side of the vortex, coolant is pushed to the side of the vortex, locally increasing the protection provided by film cooling. In addition, local heat transfer distributions change significantly as the spanwise location of the vortex is changed relative to film-cooling hole locations.

Sign in / Sign up

Export Citation Format

Share Document