Position-singularity analysis of a special class of the Stewart parallel mechanisms with two dissimilar semi-symmetrical hexagons

Robotica ◽  
2012 ◽  
Vol 31 (1) ◽  
pp. 123-136 ◽  
Author(s):  
Baokun Li ◽  
Yi Cao ◽  
Qiuju Zhang ◽  
Zhen Huang
Keyword(s):  
Special Class ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
Geometric Characteristics ◽  
Characteristic Plane ◽  
The Matrix ◽  
Grassmann Line Geometry ◽  
Moving Platform ◽  
Singularity Locus

SUMMARYIn this paper, for a special class of the Stewart parallel mechanism, whose moving platform and base one are two dissimilar semi-symmetrical hexagons, the position-singularity of the mechanism for a constant-orientation is analyzed systematically. The force Jacobian matrix [J]T is constructed based on the principle of static equilibrium and the screw theory. After expanding the determinant of the simplified matrix [D], whose rank is the same as the rank of the matrix [J]T, a cubic symbolic expression that represents the 3D position-singularity locus of the mechanism for a constant-orientation is derived and graphically represented. Further research shows that the 3D position-singularity surface is extremely complicated, and the geometric characteristics of the position-singularity locus lying in a general oblique plane are very difficult to be identified. However, the position-singularity locus lying in the series of characteristic planes, where the moving platform coincides, are all quadratic curves compromised of infinite many sets of hyperbolas, four pairs of intersecting lines and a parabola. For some special orientations, the quadratic curve can degenerate into two lines or even one line, all of which are parallel to the ridgeline. Two theorems are presented and proved for the first time when the geometric characteristics of the position-singularity curves in the characteristic plane are analyzed. Moreover, the kinematic property of the position-singularity curves is obtained using the Grassmann line geometry and the screw theory. The theoretical results are demonstrated with several numeric examples.

scholarly journals A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

2020 ◽  
Vol 33 (1) ◽  
Author(s):  
Yongquan Li ◽  
Yang Zhang ◽  
Lijie Zhang
Keyword(s):  
Closed Loop ◽  
Screw Theory ◽  
Line Graph ◽  
Degree Of Freedom ◽  
Parallel Mechanisms ◽  
Type Synthesis ◽  
Allocation Criteria ◽  
Grassmann Line Geometry ◽  
Moving Platform ◽  
Atlas Method

Abstract The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms, or using screw theory to perform multiple getting intersection and union to complete type synthesis. The number of redundant parallel mechanisms obtained by these two methods is limited. In this paper, based on Grassmann line geometry and Atlas method, a novel and effective method for type synthesis of redundant actuated parallel mechanisms (PMs) with closed-loop units is proposed. Firstly, the degree of freedom (DOF) and constraint line graph of the moving platform are determined successively, and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph, and a branch constraint allocation scheme is formulated based on the allocation criteria. Secondly, a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units. Finally, the branch chains that meet the requirements of branch chains configuration criteria and F&C (degree of freedom & constraint) line graph are assembled. In this paper, two types of 2 rotational and 1 translational (2R1T) redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational (2T1R) redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples, and 238, 92 and 15 new configurations were synthesized. All the mechanisms contain closed-loop units, and the mechanisms and the actuators both have good symmetry. Therefore, all the mechanisms have excellent comprehensive performance, in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled. The instantaneous analysis shows that all mechanisms are not instantaneous, which proves the feasibility and practicability of the method.

Singularity Analysis on a Special Class of Cable-Suspended Parallel Mechanisms With Pairwise Cable Arrangement and Actuation Redundancy

2019 ◽  
Vol 142 (2) ◽  
Author(s):  
Lewei Tang ◽  
Pengshuai Shi ◽  
Li Wu ◽  
Xiaoyu Wu ◽  
Xiaoqiang Tang
Keyword(s):  
Special Class ◽  
Degrees Of Freedom ◽  
Full Rank ◽  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
End Effector ◽  
Actuation Redundancy ◽  
Translational Movement ◽  
The Matrix ◽  
Redundant Actuators

Abstract This paper presents a singularity study on a special class of spatial cable-suspended parallel mechanisms (CSPMs) with merely three translational degrees of freedom using redundant actuators. This paper focuses on the CSPMs that have the capability to perform the purely translational movement with pairwise cables as parallelograms. There are two types of singularity to be discussed, which result from dynamic equations of CSPMs and the parallelogram constraint of pairwise cables. To ensure three-translational dofs without rotation of the end-effector, the matrix formed by normals of the planes based on each pairwise cables should maintain in full rank. In the case study, four typical designs of CSPMs with a planar end-effector and a spatial end-effector are discussed to clarify and conclude the singularity features of CSPMs with actuation redundancy. The results show that for some architectures there exist both types of singularity for redundantly actuated CSPMs with pairwise cables but for some other architectures the redundant actuation exerts no effect on the singularity issue.

scholarly journals Position-Singularity Analysis of a Class of the 3/6-Gough-Stewart Manipulators Based on Singularity-Equivalent-Mechanism

10.5772/45664 ◽  
2012 ◽  
Vol 9 (1) ◽  
pp. 9 ◽  
Author(s):  
Hui Zhou ◽  
Yi Cao ◽  
Baokun Li ◽  
Meiping Wu ◽  
Jinghu Yu ◽  
...  
Keyword(s):  
Screw Theory ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Parallel Manipulators ◽  
Singularity Analysis ◽  
Polynomial Expression ◽  
Moving Platform ◽  
Singularity Locus ◽  
Three Dimensional Space ◽  
Equivalent Mechanism

This paper addresses the problem of identifying the property of the singularity loci of a class of 3/6-Gough-Stewart manipulators for general orientations in which the moving platform is an equilateral triangle and the base is a semiregular hexagon. After constructing the Jacobian matrix of this class of 3/6-Gough-Stewart manipulators according to the screw theory, a cubic polynomial expression in the moving platform position parameters that represents the position-singularity locus of the manipulator in a three-dimensional space is derived. Graphical representations of the position-singularity locus for different orientations are given so as to demonstrate the results. Based on the singularity kinematics principle, a novel method referred to as ‘singularity-equivalent-mechanism' is proposed, by which the complicated singularity analysis of the parallel manipulator is transformed into a simpler direct position analysis of the planar singularity-equivalent-mechanism. The property of the position-singularity locus of this class of parallel manipulators for general orientations in the principal-section, where the moving platform lies, is identified. It shows that the position-singularity loci of this class of 3/6-Gough-Stewart manipulators for general orientations in parallel principal-sections are all quadratic expressions, including a parabola, four pairs of intersecting lines and infinite hyperbolas. Finally, the properties of the position-singularity loci of this class of 3/6-Gough-Stewart parallel manipulators in a three-dimensional space for all orientations are presented.

Position and Orientation Characteristic Equation for Topological Design of Parallel Mechanisms

2008 ◽  
Author(s):  
Ting-Li Yang ◽  
An-Xin Liu ◽  
Qiong Jin ◽  
Yu-Feng Luo ◽  
Hui-Ping Shen ◽  
...  
Keyword(s):  
Topological Structure ◽  
Parallel Mechanism ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Output Link ◽  
Geometrical Meaning ◽  
Operation Rules ◽  
The Matrix ◽  
Position And Orientation ◽  
Symbolic Operation

This paper presents the explicit mapping relations between topological structure of parallel mechanism and position and orientation characteristic (in short, POC) of its motion output link. It deals with: (1) The symbolic representation and the invariant of topological structure of mechanism; (2) The matrix representation of POC of motion output link; (3) The POC equations of parallel mechanism and its symbolic operation rules. The symbolic operation involves simple mathematic tools and fewer operation rules, and has clear geometrical meaning. So, it is easy to use. The forward operation of the POC equations can be used for structural analysis; its inverse operation can be used for structural synthesis. The method proposed in this paper is totally different from the methods based on screw theory and based on displacement subgroup.

Design of a new gravity balanced parallel mechanism with Schönflies motion

2016 ◽  
Vol 230 (17) ◽  
pp. 3111-3134 ◽  
Author(s):  
Long Kang ◽  
Se-Min Oh ◽  
Wheekuk Kim ◽  
Byung-Ju Yi
Keyword(s):  
Parallel Mechanism ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Force Transmission ◽  
Kinematic Modeling ◽  
Potential Applications ◽  
Structure Description ◽  
Grassmann Line Geometry ◽  
Schönflies Motion ◽  
Forward Kinematic

In this paper, a new gravity-balanced 3T1R parallel mechanism is addressed. Firstly, structure description, inverse and forward kinematic modeling are performed in detail. Secondly, Jacobian derivation based on screw theory and singularity analysis using Grassmann Line Geometry is performed, and then optimal kinematic design with respect to workspace size, kinematic isotropy and maximum force transmission ratio are conducted. Thirdly, the gravity balancing design using both counterweights and springs is proposed and a prototype of this mechanism is also presented. Results of analysis show that the proposed mechanism has quite a few potential applications.

A class of reconfigurable parallel mechanisms with five-bar metamorphic linkage

2016 ◽  
Vol 231 (11) ◽  
pp. 2089-2099 ◽  
Author(s):  
Chunxu Tian ◽  
Yuefa Fang ◽  
Sheng Guo ◽  
Haibo Qu
Keyword(s):  
Potential Application ◽  
Degrees Of Freedom ◽  
Screw Theory ◽  
Parallel Mechanisms ◽  
Constraint Force ◽  
Motion Modes ◽  
Moving Platform ◽  
Five Phases ◽  
Serial Chains

This paper presents a planar five-bar metamorphic linkage which has five phases resulting from locking of motors. Reconfigurable limbs are constructed by integrating the five-bar metamorphic linage as sub-chains. The branch transition of metamorphic linkage is analyzed. By adding appropriate joints to the planer five-bar metamorphic linkage, reconfigurable limbs whose constraint can switch among no constraint, a constrained force and a constrained couple are obtained. Serial limb structures that can provide a constraint force and a constraint couple are synthesized based on screw theory. Reconfigurable limbs that have five configurations associated with the five phases of the five-bar metamorphic linkage are assembled with 4-DOF (degrees-of-freedom) serial chains. A class of reconfigurable parallel mechanisms is derived by connecting the moving platform to the base with three identical kinematic limbs. These parallel mechanisms can perform various output motion modes such as 3T, 3R, 2T1R, 1T2R, 3T1R, 2T2R, 1T3R, 2T3R, 3T2R and 3T3R. Finally, the potential application of the proposed mechanisms is analyzed and conclusions are drawn.

scholarly journals Constraint and Singularity Analysis of the Exechon

2012 ◽  
Vol 162 ◽  
pp. 141-150 ◽  
Author(s):  
Semaan Amine ◽  
Stéphane Caro ◽  
Philippe Wenger
Keyword(s):  
Projective Space ◽  
Screw Theory ◽  
Singularity Analysis ◽  
Motion Pattern ◽  
Geometric Conditions ◽  
Moving Platform

This paper deals with the constraint and the singularity analysis of the Exechon. Using the screw theory, the constraint and actuation wrenches acting on the moving platform are analyzed. The motion pattern of the Exechon is characterized based on a representation of the constraint wrenches in the projective space. A wrench graph representing the constraint and actuation wrench systems in the projective space is obtained. Based on this wrench graph, a superbracket of the Exechon is formulated. Finally, this superbracket is explored to provide the geometric conditions for the parallel singularities of the Exechon.

Force Analysis of Spatial Single Closed-Loop Overconstrained Mechanisms

2016 ◽  
Author(s):  
Wenlan Liu ◽  
Yundou Xu ◽  
Jiantao Yao ◽  
Yongsheng Zhao
Keyword(s):  
Closed Loop ◽  
Screw Theory ◽  
Driving Forces ◽  
Parallel Mechanisms ◽  
Force Analysis ◽  
Moving Platform ◽  
Compliance Matrices ◽  
Overconstrained Mechanisms ◽  
Force Problem ◽  
Deformation Compatibility

Taking the Bennett and Schatz mechanisms as examples, force analyses of spatial single closed-loop (SSCL) overconstrained mechanisms are demonstrated aiming to obtain the driving forces/torques and joint reactions of this kind of mechanisms. Firstly, regarding the SSCL overconstrained mechanisms as parallel mechanisms with two supporting limbs, the constraint wrenches and actuation wrenches imposed on the moving platform by the two limbs are discussed, and the mobility of each mechanism is analyzed based on the screw theory. Then, the compliance matrices of the limbs’ constraint wrenches are derived, which contribute to solve the statically indeterminate force problem of the mechanisms. Next, by combining the force and moment equilibrium equation of the moving platform with the deformation compatibility equation of the corresponding mechanism, the magnitudes of all constraint wrenches and actuation wrenches are solved. Furthermore, the driving forces/torques and joint reactions are derived. Finally, the numerical and simulation results of the two mechanisms are presented.

Combinatorial Method for Characterizing Singular Configurations in Parallel Mechanisms

2015 ◽  
Author(s):  
Avshalom Sheffer ◽  
Offer Shai
Keyword(s):  
Singularity Analysis ◽  
Parallel Mechanisms ◽  
Line Geometry ◽  
Combinatorial Method ◽  
Combinatorial Characterization ◽  
Singular Configurations ◽  
Grassmann Line Geometry ◽  
2D And 3D ◽  
Grassmann Cayley Algebra

The paper presents a method for finding the different singular configurations of several types of parallel mechanisms/robots using the combinatorial method. The main topics of the combinatorial method being used are: equimomental line/screw, self-stresses, Dual Kennedy theorem and circle, and various types of 2D and 3D Assur Graphs such as: triad, tetrad and double triad. The paper introduces combinatorial characterization of 3/6 SP and compares it to singularity analysis of 3/6 SP using Grassmann Line Geometry and Grassmann-Cayley Algebra. Finally, the proposed method is applied for characterizing the singular configurations of more complex parallel mechanisms such as 3D tetrad and 3D double-triad.

scholarly journals Kinematic analysis of a novel 3-CRU translational parallel mechanism

2015 ◽  
Vol 6 (1) ◽  
pp. 57-64 ◽  
Author(s):  
B. Li ◽  
Y. M. Li ◽  
X. H. Zhao ◽  
W. M. Ge
Keyword(s):  
Parallel Mechanism ◽  
Degrees Of Freedom ◽  
Jacobian Matrix ◽  
Screw Theory ◽  
Structural Characteristics ◽  
Parallel Mechanisms ◽  
Reachable Workspace ◽  
Potential Applications ◽  
Moving Platform ◽  
And Performance

Abstract. In this paper, a modified 3-DOF (degrees of freedom) translational parallel mechanism (TPM) three-CRU (C, R, and U represent the cylindrical, revolute, and universal joints, respectively) structure is proposed. The architecture of the TPM is comprised of a moving platform attached to a base through three CRU jointed serial linkages. The prismatic motions of the cylindrical joints are considered to be actively actuated. Kinematics and performance of the TPM are studied systematically. Firstly, the structural characteristics of the mechanism are described, and then some comparisons are made with the existing 3-CRU parallel mechanisms. Although these two 3-CRU parallel mechanisms are both composed of the same CRU limbs, the types of freedoms are completely different due to the different arrangements of limbs. The DOFs of this TPM are analyzed by means of screw theory. Secondly, both the inverse and forward displacements are derived in closed form, and then these two problems are calculated directly in explicit form. Thereafter, the Jacobian matrix of the mechanism is derived, the performances of the mechanism are evaluated based on the conditioning index, and the performance of a 3-CRU TPM changing with the actuator layout angle is investigated. Thirdly, the workspace of the mechanism is obtained based on the forward position analysis, and the reachable workspace volume is derived when the actuator layout angle is changed. Finally, some conclusions are given and the potential applications of the mechanism are pointed out.

Sign in / Sign up

Export Citation Format

Share Document