High spatial resolution AEM observations of yttrium segregation in chromia scales grown on Co-45%Cr

1986 ◽  
Vol 44 ◽  
pp. 518-519
Author(s):  
K. Przybylski ◽  
A. J. Garratt-Reed ◽  
G. J. Yurek
Keyword(s):  
Spatial Resolution ◽  
Outer Surface ◽  
Maximum Concentration ◽  
High Spatial Resolution ◽  
Reactive Elements ◽  
Chromia Scales

The addition of so-called “reactive” elements such as yttrium to alloys is known to enhance the protective nature of Cr2O3 or Al2O3 scales. However, the mechanism by which this enhancement is achieved remains unclear. An A.E.M. study has been performed of scales grown at 1000°C for 25 hr. in pure O2 on Co-45%Cr implanted at 70 keV with 2x1016 atoms/cm2 of yttrium. In the unoxidized alloys it was calculated that the maximum concentration of Y was 13.9 wt% at a depth of about 17 nm. SIMS results showed that in the scale the yttrium remained near the outer surface.

Cristal-growth dynamics of n-doped gaAs

1992 ◽  
Vol 50 (2) ◽  
pp. 1544-1545
Author(s):  
Pham V. Huong ◽  
Stéphanie Bouchet ◽  
Jean-Claude Launay
Keyword(s):  
Crystal Growth ◽  
Spatial Resolution ◽  
Epitaxial Layer ◽  
Outer Surface ◽  
Gaas Substrate ◽  
Structural Modification ◽  
Growth Dynamics ◽  
Argon Laser ◽  
High Anisotropy ◽  
Crystal Gaas

Microstructure of epitaxial layers of doped GaAs and its crystal growth dynamics on single crystal GaAs substrate were studied by Raman microspectroscopy with a Dilor OMARS instrument equipped with a 1024 photodiode multichannel detector and a ion-argon laser Spectra-Physics emitting at 514.5 nm.The spatial resolution of this technique, less than 1 μm2, allows the recording of Raman spectra at several spots in function of thickness, from the substrate to the outer deposit, including areas around the interface (Fig.l).The high anisotropy of the LO and TO Raman bands is indicative of the orientation of the epitaxial layer as well as of the structural modification in the deposit and in the substrate at the interface.With Sn doped, the epitaxial layer also presents plasmon in Raman scattering. This fact is already very well known, but we additionally observed that its frequency increases with the thickness of the deposit. For a sample with electron density 1020 cm-3, the plasmon L+ appears at 930 and 790 cm-1 near the outer surface.

Integration of Core-Edge Spectroscopy Methods for the Study of Polymers

1996 ◽  
Vol 54 ◽  
pp. 154-155
Author(s):  
E. G. Rightor
Keyword(s):  
Excited State ◽  
Polymer Blends ◽  
Gas Phase ◽  
Spatial Resolution ◽  
High Spatial Resolution ◽  
Electronic States ◽  
Core Electron ◽  
Bulk Solids ◽  
Development Application

Core edge spectroscopy methods are versatile tools for investigating a wide variety of materials. They can be used to probe the electronic states of materials in bulk solids, on surfaces, or in the gas phase. This family of methods involves promoting an inner shell (core) electron to an excited state and recording either the primary excitation or secondary decay of the excited state. The techniques are complimentary and have different strengths and limitations for studying challenging aspects of materials. The need to identify components in polymers or polymer blends at high spatial resolution has driven development, application, and integration of results from several of these methods.

Color Hologram Generation Using High Spatial Resolution Camera

2013 ◽  
Vol 67 (3) ◽  
pp. J108-J115
Author(s):  
Kosuke Nomura ◽  
Ryutaro Oi ◽  
Takanori Senoh ◽  
Taiichiro Kurita ◽  
Takayuki Hamamoto
Keyword(s):  
Spatial Resolution ◽  
High Spatial Resolution
Sign in / Sign up

Export Citation Format

Share Document