ABSTRACTIn the present paper different tunneling mechanisms in conventional and half-metallic ferromagnetic tunnel junctions are analyzed within the same general method. Theoretically calculated direct tunneling in iron group systems leads to about a 30% change in resistance, which is close but lower than experimentally observed values. It is shown that the larger observed values of the TMR might be a result of tunneling involving surface polarized states. We find that tunneling via resonant defect states in the barrier radically decreases the TMR (down to 4% with Fe-based electrodes), and a resonant tunnel diode structure would give a TMR of about 8%. With regards to inelastic tunneling, magnons and phonons exhibit opposite effects: one-magnon emission generally results in spin mixing and, consequently, reduces the TMR, whereas phonons are shown to enhance the TMR. The inclusion of both magnons and phonons reasonably explains an unusual bias dependence of the TMR.The model presented here is applied qualitatively to half-metallics with 100% spin polarization, where one-magnon processes are suppressed and the change in resistance in the absence of spin-mixing on impurities may be arbitrarily large. Even in the case of imperfect magnetic configurations, the resistance change can be a few 1000 percent. Examples of half-metallic systems are CrO2/TiO2 and CrO2/RuO2, and an account of their peculiar band structures is presented. The implications and relation of these systems to CMR materials, which are nearly half-metallic, are discussed.
The antiphase boundary in half-metallic Heusler alloy Co2Fe(Al,Si): atomic structure, spin polarization reversal, and domain wall effects