Side Reactions in the Formation of Polyurethanes: Model Reactions Between Phenylisocyanate and 1-Butanol

1987 ◽  
Vol 24 (10) ◽  
pp. 1151-1166 ◽  
Author(s):  
M. Špirková ◽  
M. Kubín ◽  
K. Dušek
Keyword(s):  
Side Reactions ◽  
Model Reactions

Model reactions for the study of hydrogenation and acidic activity of palladium catalysts

1987 ◽  
Vol 52 (8) ◽  
pp. 2019-2027 ◽  
Author(s):  
Libor Červený ◽  
Nguyen Thi Du ◽  
Ivo Paseka
Keyword(s):  
Palladium Catalysts ◽  
Styrene Oxide ◽  
Side Reactions ◽  
Pd Catalysts ◽  
Variable Parameters ◽  
Acid Properties ◽  
Liquid Phase Hydrogenation ◽  
Acid Catalysed Reactions ◽  
Different Content ◽  
Model Reactions

Palladium catalysts have been used to study the hydrogenation of 1-phenyl-2-butene-1-ol which is accompanied by several side reactions considered to be acid-catalysed. Another model reaction studied was dehydration and subsequent hydrogenation or hydrogenolysis of 1-phenyl-1,3-propanediol to 3-phenyl-1-propanol, accompanied by formation of propylbenzene. The dehydration and propylbenzene formation can be again classified as acid-catalysed reactions. Another one is methanolysis of styrene oxide taking place under conditions of liquid phase hydrogenation due to the acid properties of Pd-H systems. Hydrogenation activity of Pd catalysts was tested by hydrogenation of cyclohexene. Sixteen Pd catalysts on different supports and with different content of active component were used, their activity and selectivity was determined and the effect of variable parameters in the synthesis of these catalysts on the activity and selectivity is discussed.

Aldehyde gold clusters for molecular labeling

1995 ◽  
Vol 53 ◽  
pp. 858-859
Author(s):  
James F. Hainfeld ◽  
Frederic R. Furuya
Keyword(s):  
Covalent Bond ◽  
Aldehyde Group ◽  
Gold Clusters ◽  
Side Reactions ◽  
Amino Groups ◽  
Sodium Cyanoborohydride ◽  
Schiff’S Base ◽  
Protein Molecules ◽  
Hydroxysuccinimide Esters ◽  
Primary Amino

Glutaraldehyde is a useful tissue and molecular fixing reagents. The aldehyde moiety reacts mainly with primary amino groups to form a Schiff's base, which is reversible but reasonably stable at pH 7; a stable covalent bond may be formed by reduction with, e.g., sodium cyanoborohydride (Fig. 1). The bifunctional glutaraldehyde, (CHO-(CH2)3-CHO), successfully stabilizes protein molecules due to generally plentiful amines on their surface; bovine serum albumin has 60; 59 lysines + 1 α-amino. With some enzymes, catalytic activity after fixing is preserved; with respect to antigens, glutaraldehyde treatment can compromise their recognition by antibodies in some cases. Complicating the chemistry somewhat are the reported side reactions, where glutaraldehyde reacts with other amino acid side chains, cysteine, histidine, and tyrosine. It has also been reported that glutaraldehyde can polymerize in aqueous solution. Newer crosslinkers have been found that are more specific for the amino group, such as the N-hydroxysuccinimide esters, and are commonly preferred for forming conjugates. However, most of these linkers hydrolyze in solution, so that the activity is lost over several hours, whereas the aldehyde group is stable in solution, and may have an advantage of overall efficiency.

Inhibition of Fibrinolysis and Fibrinogenolysis in Man: Comparison of ε-Aminocaproic Acid and Kallikrein Inhibitor

1963 ◽  
Vol 10 (01) ◽  
pp. 106-119 ◽  
Author(s):  
E Beck ◽  
R Schmutzler ◽  
F Duckert ◽  
Keyword(s):  
Aminocaproic Acid ◽  
Side Reactions ◽  
In Vitro Tests ◽  
Factor V ◽  
Clinical Use ◽  
Strong Inhibitor ◽  
Kallikrein Inhibitor ◽  
Therapeutic Possibilities

SummaryInhibitor of kallikrein and trypsin (KI) extracted from bovine parotis was compared with ε-aminocaproic acid (EACA): both substances inhibit fibrinolysis induced with streptokinase. EACA is a strong inhibitor of fibrinolysis in concentrations higher than 0, 1 mg per ml plasma. The same amount and higher concentrations are not able to inhibit completely the proteolytic-side reactions of fibrinolysis (fibrinogenolysis, diminution of factor V, rise of fibrin-polymerization-inhibitors). KI inhibits well proteolysis of plasma components in concentrations higher than 2,5 units per ml plasma. Much higher amounts of KI are needed to inhibit fibrinolysis as demonstrated by our in vivo and in vitro tests.Combination of the two substances for clinical use is suggested. Therapeutic possibilities are discussed.

Energetic Control of Redox-Active Polymers Towards Safe Organic Bioelectronic Materials

2019 ◽  
Author(s):  
Alexander Giovannitti ◽  
Reem B. Rashid ◽  
Quentin Thiburce ◽  
Bryan D. Paulsen ◽  
Camila Cendra ◽  
...  
Keyword(s):  
Molecular Oxygen ◽  
Organic Semiconductors ◽  
Side Reaction ◽  
Semiconducting Polymers ◽  
Side Reactions ◽  
Redox Active ◽  
Donor Acceptor ◽  
Electrochemical Devices ◽  
Biological Environment ◽  
Device Operation

<p>Avoiding faradaic side reactions during the operation of electrochemical devices is important to enhance the device stability, to achieve low power consumption, and to prevent the formation of reactive side‑products. This is particularly important for bioelectronic devices which are designed to operate in biological systems. While redox‑active materials based on conducting and semiconducting polymers represent an exciting class of materials for bioelectronic devices, they are susceptible to electrochemical side‑reactions with molecular oxygen during device operation. We show that this electrochemical side reaction yields hydrogen peroxide (H<sub>2</sub>O<sub>2</sub>), a reactive side‑product, which may be harmful to the local biological environment and may also accelerate device degradation. We report a design strategy for the development of redox-active organic semiconductors based on donor-acceptor copolymers that prevent the formation of H<sub>2</sub>O<sub>2</sub> during device operation. This study elucidates the previously overlooked side-reactions between redox-active conjugated polymers and molecular oxygen in electrochemical devices for bioelectronics, which is critical for the operation of electrolyte‑gated devices in application-relevant environments.</p>

Visible-Light Activated [2+2] Photocycloaddition Reaction Enabled Identification of Carbon-Carbon Double Bonds Position Isomerism in Structural Lipidomics

2020 ◽  
Author(s):  
Guifang Feng ◽  
Yanhong Hao ◽  
Liang Wu ◽  
Suming Chen
Keyword(s):  
Visible Light ◽  
Uv Light ◽  
Practical Importance ◽  
Side Reactions ◽  
Potential Health ◽  
Fundamental Interest ◽  
Unsaturated Lipids ◽  
Health Damage ◽  
Global Identification ◽  
Polyunsaturated Lipids

The photocycloaddition of olefins with carbonyls is of fundamental interest and practical importance in C=C bond location in unsaturated lipids. However, the traditional UV light activated [2+2] photocycloaddition reaction suffers side reactions and potential health damage. Here, we reported the first example of visible-light activated [2+2] photocycloaddition of anthraquinone with unsaturated lipids. This reaction showed great capability for locating the C=C bonds in various kinds of monounsaturated and polyunsaturated lipids by combining with tandem mass spectrometry (MS), such as fatty acids, phospholipids and glycerides. Based on this developed reaction, a workflow with liquid chromatography tandem MS method was developed for the global identification of unsaturated lipids in human serum, and 86 of monounsaturated and complicated polyunsaturated lipids were identified with definitive positions of C=C bonds. This approach provides new insights both on the photocycloaddition reactions and the structural lipidomics.

Influence of VC and FEC Additives on Interphase Properties of Carbon in Li-Ion Cells Investigated by Combined EIS & EQCM-D

2020 ◽  
Author(s):  
Paul Kitz ◽  
Matthew Lacey ◽  
Petr Novák ◽  
Erik Berg
Keyword(s):  
Electrochemical Impedance ◽  
Solid Electrolyte Interphase ◽  
Electrochemical Quartz Crystal Microbalance ◽  
Gas Analysis ◽  
Side Reactions ◽  
Ion Diffusion ◽  
Battery Cell ◽  
Anode Passivation ◽  
Order Of Magnitude ◽  
Li Ion

<div>The electrolyte additives vinylene carbonate (VC) and fluoroethylene carbonate (FEC) are well known for increasing the lifetime of a Li-ion battery cell by supporting the formation of an effective solid electrolyte interphase (SEI) at the anode. In this study combined simultaneous electrochemical impedance spectroscopy (EIS) and <i>operando</i> electrochemical quartz crystal microbalance with dissipation monitoring (EQCM-D) are employed together with <i>in situ</i> gas analysis (OEMS) to study the influence of VC and FEC on the passivation process and the interphase properties at carbon-based anodes. In small quantities both additives reduce the initial interphase mass loading by 30 to 50 %, but only VC also effectively prevents continuous side reactions and improves anode passivation significantly. VC and FEC are both reduced at potentials above 1 V vs. Li<sup>+</sup>/Li in the first cycle and change the SEI composition which causes an increase of the SEI shear storage modulus by over one order of magnitude in both cases. As a consequence, the ion diffusion coefficient and conductivity in the interphase is also significantly affected. While small quantities of VC in the initial electrolyte increase the SEI conductivity, FEC decomposition products hinder charge transport through the SEI and thus increase overall anode impedance significantly. </div>

A Convenient Way for the Synthesis of Mono N-Alkylated Ethanolamine

2020 ◽  
Author(s):  
ZHE LI ◽  
Changren Yan
Keyword(s):  
Side Reactions ◽  
By Products

<p><i>N-</i>alkylated ethanol amines, especially the <i>N-</i>monoalkylated ethanol amines, feature widely applications in industries. This manuscript would introduce a new methodology to prepare <i>N-</i>monoalkylated ethanol amine derivatives that could avoid potential side reactions forming <i>N,N-</i>dialkylated by-products.</p>

The Stabilizing Effect of Pre-Equilibria: A Trifluoromethyl Complex as CF2 Reservoir in Catalytic Olefin Difluorocarbenation

2020 ◽  
Author(s):  
Thomas Louis-Goff ◽  
Huu Vinh Trinh ◽  
Eileen Chen ◽  
Arnold L. Rheingold ◽  
Christian Ehm ◽  
...  
Keyword(s):  
High Selectivity ◽  
Side Reactions ◽  
Theoretical Studies ◽  
Attractive Feature ◽  
Catalyst Recovery ◽  
Wide Range ◽  
Stabilizing Effect ◽  
Experimental And Theoretical Studies

A new, efficient, catalytic difluorocarbenation of olefins to give 1,1-difluorocyclopropanes is presented. The catalyst, an organobismuth complex, uses TMSCF<sub>3</sub> as a stoichiometric difluorocarbene source. We demonstrate both the viability and robustness of this reaction over a wide range of alkenes and alkynes, including electron-poor alkenes, to generate the corresponding 1,1-difluorocyclopropanes and 1,1-difluorocyclopropenes. Ease of catalyst recovery from the reaction mixture is another attractive feature of this method. In depth experimental and theoretical studies showed that the key difluorocarbene-generating step proceeds through a bismuth non-redox synchronous mechanism generating a highly reactive free CF<sub>2</sub> in an endergonic pre-equilibrium. It is the reversibility when generating the difluorocarbene that accounts for the high selectivity, while minimizing CF<sub>2</sub>-recombination side-reactions.

A Facile, Efficient and Selective Deprotection of P - Methoxy Benzyl Ethers Using Zinc (II) Trifluoromethanesulfonate

2019 ◽  
Vol 16 (12) ◽  
pp. 955-958
Author(s):  
Reddymasu Sireesha ◽  
Reddymasu Sreenivasulu ◽  
Choragudi Chandrasekhar ◽  
Mannam Subba Rao
Keyword(s):  
Room Temperature ◽  
Protecting Groups ◽  
Side Reactions ◽  
Reaction Conditions ◽  
Acid Sensitivity ◽  
Time Period ◽  
Protective Groups ◽  
Benzyl Ethers ◽  
Last Stage ◽  
Zinc Triflate

: Deprotection is significant and conducted over mild reaction conditions, in order to restrict any more side reactions with sensitive functional groups as well as racemization or epimerization of stereo center because the protective groups are often cleaved at last stage in the synthesis. P - Methoxy benzyl (PMB) ether appears unique due to its easy introduction and removal than the other benzyl ether protecting groups. A facile, efficient and highly selective cleavage of P - methoxy benzyl ethers was reported by using 20 mole% Zinc (II) Trifluoromethanesulfonate at room temperature in acetonitrile solvent over 15-120 min. time period. To study the generality of this methodology, several PMB ethers were prepared from a variety of substrates having different protecting groups and subjected to deprotection of PMB ethers using Zn(OTf)2 in acetonitrile. In this methodology, zinc triflate cleaves only PMB ethers without affecting acid sensitivity, base sensitivity and also chiral epoxide groups.

Reactions in Activated Peroxide Systems and their Influences on Bleaching Performance

2020 ◽  
Vol 17 ◽  
Author(s):  
Xiaoyan Wang ◽  
Jinmei Du ◽  
Changhai Xu
Keyword(s):  
Aqueous Solution ◽  
Hydrogen Peroxide ◽  
Energy Efficiency ◽  
Textile Industry ◽  
High Energy ◽  
Side Reactions ◽  
Competitive Reactions ◽  
High Energy Efficiency ◽  
Hydrolysis Of ◽  
Bleach Activators

Abstract:: Activated peroxide systems are formed by adding so-called bleach activators to aqueous solution of hydrogen peroxide, developed in the seventies of the last century for use in domestic laundry for their high energy efficiency and introduced at the beginning of the 21st century to the textile industry as an approach toward overcoming the extensive energy consumption in bleaching. In activated peroxide systems, bleach activators undergo perhydrolysis to generate more kinetically active peracids that enable bleaching under milder conditions while hydrolysis of bleach activators and decomposition of peracids may occur as side reactions to weaken the bleaching efficiency. This mini-review aims to summarize these competitive reactions in activated peroxide systems and their influence on bleaching performance.

Sign in / Sign up

Export Citation Format

Share Document