Measurement of Atmospheric Dry Deposition Flux and Resultant Deposition Velocity of Inorganic Pollutants in the Provincial Capital of Punjab, Pakistan

2008 ◽  
Vol 9 (4) ◽  
pp. 290-294 ◽  
Author(s):  
S. N. A. Tahir ◽  
Sahibzad Khan
2020 ◽  
Author(s):  
Athanasios Nenes ◽  
Maria Kanakidou ◽  
Spyros Pandis ◽  
Armistead Russell ◽  
Shaojie Song ◽  
...  

<p>Nitrogen oxides (NOx) and ammonia (NH<sub>3</sub>) from anthropogenic and biogenic emissions are central contributors to particulate matter (PM) concentrations worldwide. Ecosystem productivity can also be strongly modulated by the atmospheric deposition of this inorganic "reactive nitrogen" nutrient. The response of PM and nitrogen deposition to changes in the emissions of both compounds is typically studied on a case-by-case basis, owing in part to the complex thermodynamic interactions of these aerosol precursors with other PM constituents. In the absence of rain, much of the complexity of nitrogen deposition is driven by the large difference in dry deposition velocity when a nitrogen-containing molecule is in the gas or condensed phase.</p><p>Here we present a simple but thermodynamically consistent approach that expresses the chemical domains of sensitivity of aerosol particulate matter to NH<sub>3</sub> and HNO<sub>3</sub> availability in terms of aerosol pH and liquid water content. From our analysis, four policy-relevant regimes emerge in terms of sensitivity: i) NH<sub>3</sub>-sensitive, ii) HNO<sub>3</sub>-sensitive, iii) combined NH<sub>3</sub> and HNO<sub>3</sub> sensitive, and, iv) a domain where neither NH<sub>3</sub> and HNO<sub>3</sub> are important for PM levels (but only nonvolatile precursors such as NVCs and sulfate). When this framework is applied to ambient measurements or predictions of PM and gaseous precursors, the “chemical regime” of PM sensitivity to NH3 and HNO3 availability is directly determined. </p><p>The same framework is then extended to consider the impact of gas-to-particle partitioning, on the deposition velocity of NH<sub>3</sub> and HNO<sub>3</sub> individually, and combined affects the dry deposition of inorganic reactive nitrogen. Four regimes of deposition velocity emerge: i) HNO<sub>3</sub>-fast, NH<sub>3</sub>-slow, ii) HNO<sub>3</sub>-slow, NH<sub>3</sub>-fast, iii) HNO<sub>3</sub>-fast, NH<sub>3</sub>-fast, and, iv) HNO<sub>3</sub>-slow, NH<sub>3</sub>-slow. Conditions that favor strong partitioning of species to the aerosol phase strongly delay the deposition of reactive nitrogen species and promotes their accumulation in the boundary layer and potential for long-range transport. </p><p>The use of these regimes allows novel insights and is an important tool to evaluate chemical transport models. Most notably, we find that nitric acid displays considerable variability of dry deposition flux, with maximum deposition rates found in the Eastern US (close to gas-deposition rates) and minimum rates for North Europe and China. Strong reductions in deposition velocity lead to considerable accumulation of nitrate aerosol in the boundary layer –up to 10-fold increases in PM2.5 nitrate aerosol, eventually being an important contributor to high PM2.5 levels observed during haze episodes. With this new understanding, aerosol pH and associated liquid water content can be understood as control parameters that drive PM formation and dry deposition flux and arguably can catalyze the accumulation of aerosol precursors that cause intense haze events throughout the globe.</p>


PLoS ONE ◽  
2016 ◽  
Vol 11 (7) ◽  
pp. e0158616 ◽  
Author(s):  
Lijuan Zhu ◽  
Jiakai Liu ◽  
Ling Cong ◽  
Wenmei Ma ◽  
Wu Ma ◽  
...  

2018 ◽  
Author(s):  
Shelley C. van der Graaf ◽  
Enrico Dammers ◽  
Martijn Schaap ◽  
Jan Willem Erisman

Abstract. Atmospheric levels of reactive nitrogen have substantially increased during the last century resulting in increased nitrogen deposition to ecosystems, causing harmful effects such as soil acidification, reduction in plant biodiversity and eutrophication in lakes and the ocean. Recent developments in the use of atmospheric remote sensing enabled us to resolve concentration fields of NH3 with larger spatial coverage and these observations may be used to improve the quantification of NH3 deposition. In this paper we use a relatively simple, data-driven method to derive dry deposition fluxes and surface concentrations of NH3 for Europe and for the Netherlands. The aim of this paper is to determine for the applicability and the limitations of this method for NH3 using space-born observations of the Infrared Atmospheric Sounding Interferometer (IASI) and the LOTOS-EUROS atmospheric transport model. The original modelled dry NH3 deposition flux from LOTOS-EUROS and the flux inferred from IASI are compared to indicate areas with large discrepancies between the two and where potential model improvements are needed. The largest differences in derived dry deposition fluxes occur in large parts of Central Europe, where the satellite-observed NH3 concentrations are higher than the modelled ones, and in Switzerland, northern Italy (Po Valley) and southern Turkey, where the modelled NH3 concentrations are higher than the satellite-observed ones. A sensitivity analysis of 8 model input parameters important for NH3 dry deposition modelling showed that the IASI-derived dry NH3 deposition fluxes may vary from ~ 20 % up to ~ 50 % throughout Europe. Variations in the dry deposition velocity used for NH3 led to the largest deviations in the IASI-derived dry NH3 deposition flux and should be focused on in the future. A comparison of NH3 surface concentrations with in-situ measurements of several established networks (EMEP, MAN and LML) showed no significant, or consistent improvement in the IASI-derived NH3 surface concentrations compared to the originally modelled NH3 surface concentrations from LOTOS-EUROS. It is concluded that the IASI-derived NH3 deposition fluxes do not show strong improvements compared to modelled NH3 deposition fluxes and there is future need for better, more robust, methods to derive NH3 dry deposition fluxes.


2018 ◽  
Vol 18 (17) ◽  
pp. 13173-13196 ◽  
Author(s):  
Shelley C. van der Graaf ◽  
Enrico Dammers ◽  
Martijn Schaap ◽  
Jan Willem Erisman

Abstract. Atmospheric levels of reactive nitrogen have increased substantially during the last century resulting in increased nitrogen deposition to ecosystems, causing harmful effects such as soil acidification, reduction in plant biodiversity and eutrophication in lakes and the ocean. Recent developments in the use of atmospheric remote sensing enabled us to resolve concentration fields of NH3 with larger spatial coverage. These observations may be used to improve the quantification of NH3 deposition. In this paper, we use a relatively simple, data-driven method to derive dry deposition fluxes and surface concentrations of NH3 for Europe and for the Netherlands. The aim of this paper is to determine the applicability and the limitations of this method for NH3. Space-born observations of the Infrared Atmospheric Sounding Interferometer (IASI) and the LOTOS-EUROS atmospheric transport model are used. The original modelled dry NH3 deposition flux from LOTOS-EUROS and the flux inferred from IASI are compared to indicate areas with large discrepancies between the two. In these areas, potential model or emission improvements are needed. The largest differences in derived dry deposition fluxes occur in large parts of central Europe, where the satellite-observed NH3 concentrations are higher than the modelled ones, and in Switzerland, northern Italy (Po Valley) and southern Turkey, where the modelled NH3 concentrations are higher than the satellite-observed ones. A sensitivity analysis of eight model input parameters important for NH3 dry deposition modelling showed that the IASI-derived dry NH3 deposition fluxes may vary from ∼ 20 % up to ∼50 % throughout Europe. Variations in the NH3 dry deposition velocity led to the largest deviations in the IASI-derived dry NH3 deposition flux and should be focused on in the future. A comparison of NH3 surface concentrations with in situ measurements of several established networks – the European Monitoring and Evaluation Programme (EMEP), Meetnet Ammoniak in Natuurgebieden (MAN) and Landelijk Meetnet Luchtkwaliteit (LML) – showed no significant or consistent improvement in the IASI-derived NH3 surface concentrations compared to the originally modelled NH3 surface concentrations from LOTOS-EUROS. It is concluded that the IASI-derived NH3 deposition fluxes do not show strong improvements compared to modelled NH3 deposition fluxes and there is a future need for better, more robust, methods to derive NH3 dry deposition fluxes.


2013 ◽  
Vol 13 (5) ◽  
pp. 14221-14248 ◽  
Author(s):  
Z. W. Wang ◽  
C. A. Pedersen ◽  
X. S. Zhang ◽  
J. C. Gallet ◽  
J. Ström ◽  
...  

Abstract. Light absorbing aerosol, in particular elemental carbon (EC), in snow and ice enhance absorption of solar radiation, reduce the albedo, and is an important climate driver. In this study, measurements of EC concentration in air and snow are performed concurrently at Changbai Station, Northeastern China, from 2009 to 2012. The mean EC concentration for surface snow is 987 ± 1510 ng g−1 with a range of 7 to 7636 ng g−1. EC levels in surface snow around (about 50 km) Changbai Mountain are lower than those collected on the same day at Changbai station, and decrease with distance from Changbai station, indicating that EC load in snow around Changbai Mountain is influenced by local source emissions. Scavenging ratios of EC by snow are calculated through comparing the concentrations of EC in fresh snow with those in air. The upper-limit of mean scavenging ratio is 137.4 ± 99.7 with median 149.4, which is smaller than those reported from Arctic areas. The non-rimed snow process may be one of significant factors for interpreting the difference of scavenging ratio in this area with the Arctic areas. Finally, wet and dry depositional fluxes of EC have been estimated, and the upper-limit of EC wet deposition flux is 0.46 ± 0.38 μg cm−2 month−1 during the three consecutive snow season, and 1.32 ± 0.95 μg cm−2 month−1 for dry deposition flux from December to February during study period. During these three years, 77% of EC in snow is attributed to the dry deposition, indicating that dry deposition processes play a major role for EC load in snow in the area of Changbai, Northeastern China. Based on the dry deposition fluxes of EC and hourly black carbon (BC) concentrations in air, the estimated mean dry deposition velocity is 2.81 × 10−3 m s−1 with the mean median of 3.15 × 10−3 m s−1. These preliminary estimates for the scavenging ratio and dry deposition velocity of EC on snow surface will be beneficial for numerical models, and improve simulations of EC transport, fate and radiative forcing in order to ultimately make better climate prediction.


Sign in / Sign up

Export Citation Format

Share Document