scholarly journals Calculation studies of the influence of exhaust gas recirculation on the characteristics of the natural gas-fueled diesel engine

2021 ◽  
Vol 2061 (1) ◽  
pp. 012065
Author(s):  
I I Libkind ◽  
A V Gonturev
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Fuel Mixture ◽  
Exhaust Gas Recirculation ◽  
Intake Manifold ◽  
Nox Emissions ◽  
Exhaust Gas ◽  
Diesel Cycle ◽  
Gas Fueled ◽  
Gas Recirculation

Abstract When converting diesel engines to run on natural gas on the gas-diesel cycle, additional problems arise associated with the high thermal stress of the exhaust valves and valve seats at high loads and engine speeds. There is also an increase in NOx emissions due to higher combustion temperatures of natural gas. One of the ways to improve the economic and environmental performance of engines operating on a gas-diesel cycle with a lean air-fuel mixture is to optimize the combustion of the air-fuel mixture by using an exhaust gas recirculation system (EGR). The principle of operation of this system is as follows: exhaust gas entering the intake manifold and further into the combustion chamber reduces the oxygen concentration in the air-fuel mixture, which leads to a dilution effect and, accordingly, to a decrease in combustion temperature and a decrease in NOx content. In order to study the influence of EGR on the dual-fuel gas and diesel engine parameters in the AVL Boost software package, a computer model of the existing 6ChN13/15 engine was developed. A low-pressure EGR system with an exhaust gas cooler was simulated on this engine. Values of NOx emissions, brake specific fuel consumption (BSFC) and brake efficiency have been obtained at different recirculation rate by calculation method. These values allow to estimate the feasibility of using a cooled EGR in a natural gas-fueled diesel engine.

Tuneable model predictive control of a turbocharged diesel engine with dual loop exhaust gas recirculation

2017 ◽  
Vol 232 (8) ◽  
pp. 1105-1120 ◽  
Author(s):  
Yunfan Zhang ◽  
Guoxiang Lu ◽  
Hongming Xu ◽  
Ziyang Li
Keyword(s):  
Diesel Engine ◽  
Model Predictive Control ◽  
Predictive Control ◽  
Mimo System ◽  
Exhaust Gas Recirculation ◽  
Intake Manifold ◽  
Exhaust Gas ◽  
Strong Nonlinearity ◽  
Turbocharged Diesel Engine ◽  
Gas Recirculation

The air path of a turbocharged diesel engine is a multi-input multi-output (MIMO) system with strong nonlinearity, coupling effect, delay and actuator constraints. This makes the design and tuning of the controller complex. In this paper, a tuneable model predictive control (TMPC) controller for a diesel engine’s air path with dual loop exhaust gas recirculation (DLEGR) is presented. The objective is to regulate the intake manifold pressure and exhaust gas recirculation (EGR) mass flow in each loop to meet the time-varying setpoints through coordinated control of the variable geometry turbocharger (VGT) and EGR valves. The TMPC controller adopts the design framework of an MPC controller. This controller is also able to provide a map-based switching scheme for the local controller and the controller’s weightings. A comparison between the TMPC controller and a conventional PID controller is conducted on a validated real-time engine model. The simulation results show that the TMPC controller achieves lower overshoot, faster response and a shorter settling time on the manipulated objects. These improvements are beneficial for obtaining lower fuel consumption. In order to test the capability of the TMPC controller, it is validated on a hardware in the loop (HIL) platform. The results show that the agreement between the simulation and the actual ECU’s response is good.

Reduction of emissions in an automotive direct injection diesel engine dual-fuelled with natural gas by using variable exhaust gas recirculation

2003 ◽  
Vol 217 (8) ◽  
pp. 719-725 ◽  
Author(s):  
V Pirouzpanah ◽  
R Khoshbakhti Sarai
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Direct Injection ◽  
Exhaust Gas Recirculation ◽  
Exhaust Emission ◽  
Exhaust Gas ◽  
Compressed Natural Gas ◽  
Pilot Fuel ◽  
Unburned Hydrocarbons ◽  
Gas Recirculation

An experimental study was conducted to determine the performance and exhaust emission characteristics of an automotive direct injection dual-fuelled diesel engine. Natural gas was used such that 65 per cent of engine brake power was supplied from compressed natural gas and the rest was supplied from diesel fuel. The objective of this work is to investigate the possibility of decreasing exhaust emission with the lowest performance sacrifice. At part loads, a dual-fuelled engine inevitably suffers from lower thermal efficiency and higher carbon monoxide (CO) emission. This is mainly due to leaner mixture and incomplete combustion, which is a consequence of the smaller amount of pilot fuel. To resolve these problems, the e ects of cooled exhaust gas recirculation (EGR) were investigated. The experimental results show that the application of EGR, at higher loads with 10 per cent EGR and at part loads with 15 per cent EGR, can considerably reduce NO x and other exhaust emissions such as unburned hydrocarbons, CO and soot. Results show that the performance parameters almost remain at the baseline engine level.

Numerical Modelling of Internal Combustion Engines Fuelled by Hydrogen-Natural Gas Blends

2008 ◽  
Author(s):  
Antonio Mariani ◽  
Biagio Morrone ◽  
Andrea Unich
Keyword(s):  
Natural Gas ◽  
Internal Combustion Engines ◽  
Exhaust Gas Recirculation ◽  
Internal Combustion ◽  
Flame Speed ◽  
Operating Conditions ◽  
Nox Emissions ◽  
Exhaust Gas ◽  
Combustion Engines ◽  
Gas Recirculation

The strict rules that European Community has given for reducing vehicle emissions require new views on the choice of combustion engines and fuels. In fact, the rules will probably introduce in the near future limitations on carbon dioxide (CO2) emissions. Internal combustion engines are responsible for emission of unburned hydrocarbons (HC), nitrogen oxides (NOx) and particulate matter (PM). The aim of the present paper is the study of the effects of hydrogen-natural gas blends (HCNG) on the performance, efficiency and NOx emissions of internal combustion engines (ICE). A numerical engine model has been developed to display how the presence of hydrogen in such mixtures impacts on flame speed and burn rates. The model allows the comparison of different fuels, in terms of engine brake efficiency and pollutant emissions. An important variable for the combustion process is the ignition timing which is set employing Maximum Brake Torque (MBT) spark advance. Engine operating conditions considered in the numerical analysis have been obtained by imposing engine speed and load. Brake power, efficiency and NOx emissions are calculated for the most frequent operating conditions met by automotive engines, i.e. part load and low speed. The effect of natural gas (NG) enrichment by hydrogen on flame speed has been considered. Thus, faster combustion and the reduction of energy content in the air-fuel mixtures due to the lower density of hydrogen are taken into account. Hydrogen enrichment of natural gas improves combustion stability in critical conditions, allowing the use of extremely lean mixtures or high Exhaust Gas Recirculation rates. The results show that by employing an MBT spark advance, the HCNG blends furnish improvements of engine brake efficiency compared with compressed natural gas (CNG), which are more relevant at part loads and for the higher hydrogen content. Anyway, higher NOx emissions are observed due to the increased temperatures into the cylinders. Thus, the analysis also takes into account the Exhaust Gas Recirculation (EGR) dilution technique to reduce the NOx emissions. A large reduction of such pollutant, which has been estimated greater than 50%, can be achieved by using a 10% EGR. Furthermore higher engine efficiency is obtained using EGR due to reduced pumping work, reduced heat loss to the walls because of lower gas temperature and a reduction in the degree of dissociation in the high temperature burned gases.

Evaluation of Emissions Characteristics of Marine Diesel Engine Intake of Exhaust Gas of Lean Burn Gas Engine

2017 ◽  
Vol 140 (2) ◽  
Author(s):  
Yoshifuru Nitta ◽  
Dong-Hoon Yoo ◽  
Sumito Nishio ◽  
Yasuhisa Ichikawa ◽  
Koichi Hirata ◽  
...  
Keyword(s):  
Diesel Engine ◽  
Natural Gas ◽  
Co2 Emissions ◽  
Exhaust Gas Recirculation ◽  
Marine Diesel Engine ◽  
Exhaust Gas ◽  
Lean Burn ◽  
Gas Engine ◽  
Marine Diesel ◽  
Gas Recirculation

The need for reductions of nitrogen oxides (NOx), sulfur oxides (SOx), and carbon dioxide (CO2) emissions has been acknowledged on the global level. However, it is difficult to meet the strengthened emissions regulations by using the conventional marine diesel engines. Therefore, lean burn gas engines have been recently attracting attention in the maritime industry. Because they use natural gas as fuel and can simultaneously reduce both NOx and CO2 emissions. On the other hand, since methane is the main component of natural gas, the slipped methane, which is the unburned methane emitted from the lean burn gas engines, might have a potential impact on global warming. The authors have proposed a combined exhaust gas recirculation (C-EGR) system to reduce the slipped methane from the gas engines and NOx from marine diesel engines by providing the exhaust gas from lean burn gas engine to the intake manifold of the marine diesel engine using a blower. Since the exhaust gas from the gas engine includes slipped methane, this system could reduce both the NOx from the marine diesel engine and the slipped methane from the lean burn gas engine simultaneously. This paper introduces the details of the proposed C-EGR system and presents the experimental results of emissions characteristics on the C-EGR system. As a result, it was confirmed that the C-EGR system attained more than 75% reduction of the slipped methane in the intake gas. Additionally, the NOx emission from the diesel engine decreased with the effect of the exhaust gas recirculation (EGR) system.

Sign in / Sign up

Export Citation Format

Share Document