scholarly journals Analysing Interface Bonding in 5G WLANs

Author(s):  
Michael Dilmore ◽  
Angela Doufexi ◽  
George Oikonomou
Keyword(s):  
2021 ◽  
Vol 11 (15) ◽  
pp. 6801
Author(s):  
Polina Viktorovna Polyakova ◽  
Julia Alexandrovna Pukhacheva ◽  
Stepan Aleksandrovich Shcherbinin ◽  
Julia Aidarovna Baimova ◽  
Radik Rafikovich Mulyukov

The aluminum–magnesium (Al–Mg) composite materials possess a large potential value in practical application due to their excellent properties. Molecular dynamics with the embedded atom method potentials is applied to study Al–Mg interface bonding during deformation-temperature treatment. The study of fabrication techniques to obtain composites with improved mechanical properties, and dynamics and kinetics of atom mixture are of high importance. The loading scheme used in the present work is the simplification of the scenario, experimentally observed previously to obtain Al–Cu and Al–Nb composites. It is shown that shear strain has a crucial role in the mixture process. The results indicated that the symmetrical atomic movement occurred in the Mg–Al interface during deformation. Tensile tests showed that fracture occurred in the Mg part of the final composite sample, which means that the interlayer region where the mixing of Mg, and Al atoms observed is much stronger than the pure Mg part.


2021 ◽  
Vol 21 (10) ◽  
pp. 5235-5240
Author(s):  
Hua-Hui Chen ◽  
Jing-Jing Cao ◽  
Hai-Ping Hong ◽  
Nan Zheng ◽  
Jie Ren ◽  
...  

In Situ transformed carbon fibers/Al2O3 ceramic matrix nanocomposites with Cao–MgO–SiO2 sintering agent were prepared by hot-pressed sintering technology in vacuum. In the sintering process, pre-oxidized polyacrylonitrile fibers (below named as pre-oxidized PAN fibers) were used as the precursors of In Situ transformed carbon fibers. The micro/nanostructure of composites and interface between In Situ transformed carbon fibers and matrix were investigated, as well as the properties of composites. The results showed that the composites could be sintered well at a relatively low temperature of 1650 °C. During the sintering, the precursors, pre-oxidized PAN fibers, were In Situ transformed into carbon fibers, and the In Situ transformed carbon fibers had the graphitelike structure along the fiber axial direction. The carbon atoms arrangement in the surface layer of the fiber was more orderly than the core. A typical diffraction peak of carbon fiber at 26°, which corresponded to the (002) crystal plane, was observed, and the inter-planar spacing was approximately 0.34 nm. The CaO–MgO–SiO2 sintering agent formed MgAl2O4 and CaAl2Si2O8 phases in the interface between In Situ transformed carbon fibers and matrix, therefore improving the interface bonding, and thereby modifying the mechanical properties of the composites.


2008 ◽  
Vol 23 (4) ◽  
pp. 1155-1162 ◽  
Author(s):  
Yu-Yun Peng ◽  
Tsung-Eong Hsieh ◽  
Chia-Hung Hsu

Nanocomposite films containing ZnO quantum dots (QDs) and SiOxNy matrix were prepared by target-attached radio frequency sputtering. Photoluminescence (PL) dominated by violet and blue emissions was observed from all ZnO QD–SiOxNy nanocomposite films with dot diameters ranging from 2.77 to 6.65 nm. X-ray photoemission spectroscopy (XPS) revealed the formation of nitrogen-correlated bonding configurations in both the SiOxNy matrix and the dot/matrix interfaces. The nitrogen-correlated configuration at the interface produced a substantial polarization effect at dot surface. The suppression of green-yellow emission observed in photoluminescence spectra of all samples was ascribed to the hole-trapping process promoted by the enhancement of the surface polarization.


Micromachines ◽  
2012 ◽  
Vol 3 (2) ◽  
pp. 427-441 ◽  
Author(s):  
Kai-Seng Koh ◽  
Jitkai Chin ◽  
Joanna Chia ◽  
Choon-Lai Chiang

Sign in / Sign up

Export Citation Format

Share Document