Ni-Al Film Multilayered Structure Effect on Melting Threshold and Melt Thickness in Ni-Al Surface Alloy Forming Process

2020 ◽  
Author(s):  
Daria Shepel' ◽  
Evgenii Yakovlev ◽  
Alexey Markov ◽  
Vsevolod Petrov ◽  
Andrey Solovyov
Keyword(s):  
Multilayered Structure ◽  
Surface Alloy ◽  
Structure Effect ◽  
Forming Process ◽  
Melting Threshold

Study on Bladder Forming of the Shallow Basin-Shaped Aluminum Sheet Parts

2014 ◽  
Vol 599-601 ◽  
pp. 591-594
Author(s):  
Ji Lin Tu ◽  
Yong Jun Wang ◽  
Sheng Min Wei ◽  
Xiao Peng Hui ◽  
Chao Bin Qiu
Keyword(s):  
Structure Effect ◽  
Aluminum Sheet ◽  
Forming Process ◽  
Die Structure ◽  
Forming Analysis ◽  
One Step ◽  
Shallow Basin ◽  
The One

The shallow basin-shaped aluminum sheet part had buckling defects after the bladder forming. Analysis the buckling defects’ mechanism, according to these, we proposed one step bladder forming process, used rolling leveler which could reduced the buckling height to level sheet before bladder forming, and made experiments to compare the structure effect of buckling height among the four kinds of die structure. The results showed that the one step bladder forming process is valid, and used the original die with sheet edge fold when it was bladder forming.

The Potentials of Scanning Microscopy

1968 ◽  
Vol 26 ◽  
pp. 352-353
Author(s):  
A. V. Crewe
Keyword(s):  
Salient Feature ◽  
Secondary Emission ◽  
Resolving Power ◽  
X Rays ◽  
Scanning Microscope ◽  
Forming Process ◽  
Additional Tool ◽  
Detection Systems ◽  
Conventional Microscope ◽  
Present Information

If the resolving power of a scanning electron microscope can be improved until it is comparable to that of a conventional microscope, it would serve as a valuable additional tool in many investigations.The salient feature of scanning microscopes is that the image-forming process takes place before the electrons strike the specimen. This means that several different detection systems can be employed in order to present information about the specimen. In our own particular work we have concentrated on the use of energy loss information in the beam which is transmitted through the specimen, but there are also numerous other possibilities (such as secondary emission, generation of X-rays, and cathode luminescence).Another difference between the pictures one would obtain from the scanning microscope and those obtained from a conventional microscope is that the diffraction phenomena are totally different. The only diffraction phenomena which would be seen in the scanning microscope are those which exist in the beam itself, and not those produced by the specimen.

Microscopy of porous ceramics

1989 ◽  
Vol 47 ◽  
pp. 438-439
Author(s):  
H. M. Kerch ◽  
R. A. Gerhardt
Keyword(s):  
Porous Ceramics ◽  
Specimen Preparation ◽  
High Porosity ◽  
Ion Milling ◽  
Forming Process ◽  
Preparation Methods ◽  
Pore Texture ◽  
Proper Design ◽  
And Function ◽  
Function Information

Highly porous ceramics are employed in a variety of engineering applications due to their unique mechanical, optical, and electrical characteristics. In order to achieve proper design and function, information about the pore structure must be obtained. Parameters of importance include pore size, pore volume, and size distribution, as well as pore texture and geometry. A quantitative determination of these features for high porosity materials by a microscopic technique is usually not done because artifacts introduced by either the sample preparation method or the image forming process of the microscope make interpretation difficult.Scanning electron microscopy for both fractured and polished surfaces has been utilized extensively for examining pore structures. However, there is uncertainty in distinguishing between topography and pores for the fractured specimen and sample pullout obscures the true morphology for samples that are polished. In addition, very small pores (nm range) cannot be resolved in the S.E.M. On the other hand, T.E.M. has better resolution but the specimen preparation methods involved such as powder dispersion, ion milling, and chemical etching may incur problems ranging from preferential widening of pores to partial or complete destruction of the pore network.

Platelet Microtubules in Clot Structure Formation and Contractile Force Generation: Investigation of a Controversy

1986 ◽  
Vol 56 (01) ◽  
pp. 023-027 ◽  
Author(s):  
C J Jen ◽  
L V McIntire
Keyword(s):  
Network Formation ◽  
Contractile Force ◽  
Second Phase ◽  
Clot Retraction ◽  
Forming Process ◽  
Microtubule Organization ◽  
Physiological Processes ◽  
Fibrin Network ◽  
Two Parameters

SummaryWhether platelet microtubules are involved in clot retraction/ contraction has been controversial. To address this question we have simultaneously measured two clotting parameters, clot structural rigidity and isometric contractile force, using a rheological technique. For recalcified PRP clots these two parameters began rising together at about 15 min after CaCl2 addition. In the concentration range affecting microtubule organization in platelets, colchicine, vinca alkaloids and taxol demonstrated insignificant effects on both clotting parameters of a recalcified PRP clot. For PRP clots induced by adding small amounts of exogenous thrombin, the kinetic curves of clot rigidity were biphasic and without a lag time. The first phase corresponded to a platelet-independent network forming process, while the second phase corresponded to a platelet-dependent process. These PRP clots began generating contractile force at the onset of the second phase. For both rigidity and force parameters, only the second phase of clotting kinetics was retarded by microtubule affecting reagents. When PRP samples were clotted by adding a mixture of CaCl2 and thrombin, the second phase clotting was accelerated and became superimposed on the first phase. The inhibitory effects of micro tubule affecting reagents became less pronounced. Thrombin clotting of a two-component system (washed platelets/ purified fibrinogen) was also biphasic, with the second phase being microtubule-dependent. In conclusion, platelet microtubules are important in PRP clotted with low concentrations of thrombin, during which fibrin network formation precedes platelet-fibrin interactions. On the other hand they are unimportant if a PRP clot is induced by recalcification, during which the fibrin network is constructed in the presence of platelet-fibrin interactions. The latter is likely to be more analogous to physiological processes in vivo.

Study of the process of forming a hole for a thread at manufacturing a high nut

2020 ◽  
Vol 76 (8) ◽  
pp. 841-846
Author(s):  
I. G. Shubin ◽  
A. A. Kurkin
Keyword(s):  
Metal Flow ◽  
Nonlinear Dependence ◽  
Geometrical Parameters ◽  
Relative Height ◽  
Forming Process ◽  
Normal Height ◽  
Accuracy Class ◽  
Limit Values ◽  
Program Complex ◽  
Class B

During manufacturing nuts of increased height, a problem of obtaining correct cylindrical form of the hole for thread and overall geometrical parameters arises. To solve the problem it is necessary to know regularity of the blank forming process. Results of the study of a technological process of high hexahedral nuts forming presented. The nuts were M18 of 22 mm height, M16 of 19 mm height and M12 of normal height 10 mm according to GOST 5915–70, accuracy class B, steel grade 10 according to GOST 10702–78. The volumetric stamping was accomplished at the five-position automatic presses of АА1822 type. It was determined, that unevenness of the metal flow in the process of plastic deformation of blanks of increased height nuts was caused by different stress conditions by their sections. To simulate the mode of deformation, the program complex QForm-3D was chosen. The complex ensured to forecast with necessary accuracy the metal flow in a blank, as well as to define the deformation force and arising stress in the working instrument. The simulation showed the presence of regularity between preliminary formed buffle and deviation of dimensions and form of a blank wall after its finishing piercing, which can be expressed by a nonlinear dependence. The limit values of the relative height of the buffle С/D = 0.56–0.588 defined, exceeding which will result in rejection of the finished product. Accounting the limit values of the relative height of the buffle will enable to correct a mode of technological operations and technological instruments at stamping of high hexahedral nuts.

Upscaling of foam forming technology for pilot scale

TAPPI Journal ◽  
2019 ◽  
Vol 18 (8) ◽  
Author(s):  
JANI LEHMONEN ◽  
TIMO RANTANEN ◽  
KARITA KINNUNEN-RAUDASKOSKI
Keyword(s):  
Production Efficiency ◽  
Strength Loss ◽  
Pilot Scale ◽  
Foam Density ◽  
Forming Process ◽  
Production Scale ◽  
Forming Technology ◽  
Wet Pressing ◽  
Foam Forming ◽  
Board Industry

The need for production cost savings and changes in the global paper and board industry during recent years have been constants. Changes in the global paper and board industry during past years have increased the need for more cost-efficient processes and production technologies. It is known that in paper and board production, foam typically leads to problems in the process rather than improvements in production efficiency. Foam forming technology, where foam is used as a carrier phase and a flowing medium, exploits the properties of dispersive foam. In this study, the possibility of applying foam forming technology to paper applications was investigated using a pilot scale paper forming environment modified for foam forming from conventional water forming. According to the results, the shape of jet-to-wire ratios was the same in both forming methods, but in the case of foam forming, the achieved scale of jet-to-wire ratio and MD/CD-ratio were wider and not behaving sensitively to shear changes in the forming section as a water forming process would. This kind of behavior would be beneficial when upscaling foam technology to the production scale. The dryness results after the forming section indicated the improvement in dewatering, especially when foam density was at the lowest level (i.e., air content was at the highest level). In addition, the dryness results after the pressing section indicated a faster increase in the dryness level as a function of foam density, with all density levels compared to the corresponding water formed sheets. According to the study, the bonding level of water- and foam-laid structures were at the same level when the highest wet pressing value was applied. The results of the study show that the strength loss often associated with foam forming can be compensated for successfully through wet pressing.

Conjectures, Hypotheses, and Theories of Drumlin Formation (In memory of Stanislaw Baranowski)

1981 ◽  
Vol 27 (97) ◽  
pp. 503-505 ◽  
Author(s):  
Ian J. Smalley
Keyword(s):  
Shear Strength ◽  
Pore Water ◽  
Stress Level ◽  
Critical Stress ◽  
Pore Water Pressure ◽  
Water Pressure ◽  
Glacial Till ◽  
Forming Process ◽  
Stress Levels

AbstractRecent investigations have shown that various factors may affect the shear strength of glacial till and that these factors may be involved in the drumlin-forming process. The presence of frozen till in the deforming zone, variation in pore-water pressure in the till, and the occurrence of random patches of dense stony-till texture have been considered. The occurrence of dense stony till may relate to the dilatancy hypothesis and can be considered a likely drumlin-forming factor within the region of critical stress levels. The up-glacier stress level now appears to be the more important, and to provide a sharper division between drumlin-forming and non-drumlin-forming conditions.

Sign in / Sign up

Export Citation Format

Share Document