Emergency Call Fusion Analysis System for Disaster Response

REFUGEE BASED DATA COLLECTION IN DISASTER RESPONSE

Jurnal Pertahanan ◽

10.33172/jp.v6i2.640 ◽

2020 ◽

Vol 6 (2) ◽

pp. 151

Author(s):

Muhammad Lulu Latif Usman ◽

Fifing Fifing ◽

Asep Adang Supriyadi ◽

Luthfiyah Sakinah

Keyword(s):

Information System ◽

Data Collection ◽

Disaster Response ◽

System Analysis ◽

Disaster Risk ◽

Life Cycles ◽

Requirement Analysis ◽

Waterfall Model ◽

Analysis System ◽

National Disaster

<p>Indonesia's high disaster risk requires an information system that can improve effectiveness in disaster response. Therefore, there is a need for an application that could be a means for various information in disaster response in Indonesia. This research uses the Development Life Cycles or SDLC Software, specified with the Waterfall Model. This model has 4 phases, as following: requirement analysis, system analysis, implementation, verification, and maintenance. From this research, a victim-based data collection application can collect data at the disaster site regularly. It also can replace the previous conventional methods so that it can facilitate the National Disaster Management Authority (BNPB) in carrying out information to the community. The results of this study are the prototype of data collection applications in helping disaster response.</p>

Download Full-text

Automated Image Analysis Of Nuclear And Cytoplasmic Changes In Exfoliated Cells From Tracheas Treated With Carcinogen

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100078638 ◽

1977 ◽

Vol 35 ◽

pp. 220-221

Author(s):

S.F. Stinson ◽

J.C. Lilga ◽

M.B. Sporn

Keyword(s):

Image Analysis ◽

Pattern Analysis ◽

Relative Proportion ◽

Automated Image Analysis ◽

Image Analyzer ◽

Cross Sectional ◽

Exfoliated Cells ◽

Neoplastic Lesions ◽

Analysis System ◽

Morphologic Criterion

Increased nuclear size, resulting in an increase in the relative proportion of nuclear to cytoplasmic sizes, is an important morphologic criterion for the evaluation of neoplastic and pre-neoplastic cells. This paper describes investigations into the suitability of automated image analysis for quantitating changes in nuclear and cytoplasmic cross-sectional areas in exfoliated cells from tracheas treated with carcinogen.Neoplastic and pre-neoplastic lesions were induced in the tracheas of Syrian hamsters with the carcinogen N-methyl-N-nitrosourea. Cytology samples were collected intra-tracheally with a specially designed catheter (1) and stained by a modified Papanicolaou technique. Three cytology specimens were selected from animals with normal tracheas, 3 from animals with dysplastic changes, and 3 from animals with epidermoid carcinoma. One hundred randomly selected cells on each slide were analyzed with a Bausch and Lomb Pattern Analysis System automated image analyzer.

Download Full-text

Digital Processing of STEM Images

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100097752 ◽

1981 ◽

Vol 39 ◽

pp. 236-237

Author(s):

A. V. Crewe ◽

M. Ohtsuki

Keyword(s):

High Resolution ◽

Low Dose ◽

Assembly Language ◽

Processing System ◽

Principal Component ◽

Digital Processing ◽

Image Analysis System ◽

Black And White ◽

Analysis System ◽

Dose Imaging

We have assembled an image processing system for use with our high resolution STEM for the particular purpose of working with low dose images of biological specimens. The system is quite flexible, however, and can be used for a wide variety of images.The original images are stored on magnetic tape at the microscope using the digitized signals from the detectors. For low dose imaging, these are “first scan” exposures using an automatic montage system. One Nova minicomputer and one tape drive are dedicated to this task.The principal component of the image analysis system is a Lexidata 3400 frame store memory. This memory is arranged in a 640 x 512 x 16 bit configuration. Images are displayed simultaneously on two high resolution monitors, one color and one black and white. Interaction with the memory is obtained using a Nova 4 (32K) computer and a trackball and switch unit provided by Lexidata.The language used is BASIC and uses a variety of assembly language Calls, some provided by Lexidata, but the majority written by students (D. Kopf and N. Townes).

Download Full-text

Chemical Classification and Particle Sizing of Foundry Sands

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100118813 ◽

1985 ◽

Vol 43 ◽

pp. 388-389

Author(s):

D.S. DeMiglio

Keyword(s):

Image Analysis ◽

Energy Dispersive Spectrometer ◽

Image Analysis System ◽

Representative Sampling ◽

Foundry Sands ◽

Large Atomic Number ◽

Backscattered Electron ◽

Sand Particles ◽

Analysis System ◽

Reclamation System

Much progress has been made in recent years towards the development of closed-loop foundry sand reclamation systems. However, virtually all work to date has determined the effectiveness of these systems to remove surface clay and metal oxide scales by a qualitative inspection of a representative sampling of sand particles. In this investigation, particles from a series of foundry sands were sized and chemically classified by a Lemont image analysis system (which was interfaced with an SEM and an X-ray energy dispersive spectrometer) in order to statistically document the effectiveness of a reclamation system developed by The Pangborn Company - a subsidiary of SOHIO.The following samples were submitted: unreclaimed sand; calcined sand; calcined & mechanically scrubbed sand and unused sand. Prior to analysis, each sample was sprinkled onto a carbon mount and coated with an evaporated film of carbon. A backscattered electron photomicrograph of a field of scale-covered particles is shown in Figure 1. Due to a large atomic number difference between sand particles and the carbon mount, the backscattered electron signal was used for image analysis since it had a uniform contrast over the shape of each particle.

Download Full-text

Automated high-resolution microscopy: the approaches so far

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100125312 ◽

1987 ◽

Vol 45 ◽

pp. 58-61

Author(s):

W. O. Saxton

Keyword(s):

High Resolution ◽

Early Stage ◽

Automatic Recording ◽

Microprocessor Control ◽

Alternative Systems ◽

Electron Image ◽

Complete Automation ◽

Analysis System ◽

High Resolution Microscopy

Recent commercial microscopes with internal microprocessor control of all major functions have already demonstrated some of the benefits anticipated from such systems, such as continuous magnification, rotation-free diffraction and magnification, automatic recording of mutually registered focal series, and fewer control knobs. Complete automation of the focusing, stigmating and alignment of a high resolution microscope, allowing focal series to be recorded at preselected focus values as well, is still imminent rather than accomplished, however; some kind of image pick-up and analysis system, fed with the electron image via a TV camera, is clearly essential for this, but several alternative systems and algorithms are still being explored. This paper reviews the options critically in turn, and stresses the need to consider alignment and focusing at an early stage, and not merely as an optional extension to a basic proposal.

Download Full-text