Structure-decoupled dual-mass MEMS gyroscope with self-adaptive closed-loop detection

Author(s):  
Yong Yin ◽  
Shourong Wang ◽  
Cunchao Wang ◽  
Bo Yang
2020 ◽  
Vol 30 (5) ◽  
pp. 055007 ◽  
Author(s):  
Feng Bu ◽  
Xi Wang ◽  
Bo Fan ◽  
Shuwen Guo ◽  
Dacheng Xu ◽  
...  

2021 ◽  
pp. 115646
Author(s):  
Jianfang Chang ◽  
Na Dong ◽  
Donghui Li ◽  
Minghui Qin

Author(s):  
Maxime Duquesnoy ◽  
Raphaël Lévy ◽  
Jean-Michel Melkonian ◽  
Guillaume Aoust ◽  
Myriam Raybaut ◽  
...  

Micromachines ◽  
2019 ◽  
Vol 10 (8) ◽  
pp. 496
Author(s):  
Cheng Li ◽  
Bo Yang ◽  
Xin Guo ◽  
Lei Wu

A digital excitation-calibration technique of dual-mass MEMS gyroscope for closed-loop mode-matching control is presented in this paper. The technique, which takes advantage of the symmetrical amplitude response of MEMS gyroscope, exploits a two-side excitation signal to actuate the sense mode to obtain the corresponding DC tuning voltage. The structural characteristics of dual-mass decoupled MEMS gyroscope and the tuning principle of excitation-calibration technique are introduced firstly. Then, the scheme of digital excitation-calibration system for the real-time mode-matching control is presented. Simultaneously, open-loop analysis and closed-loop analysis are deduced, respectively, to analyze the sources of tuning error and system stability. To verify the validity of the scheme and theoretical analysis, the system model was established by SIMULINK. The simulation results are proved to be consistent with the theoretical analysis, verifying the feasibility of the digital excitation-calibration technique. The control algorithms of the system were implemented with a FPGA device. Experimental results demonstrate that digital excitation-calibration technique can realize mode-matching within 1 s. The prototype with real-time mode-matching control has a bias instability of 0.813 ∘ /h and an ARW (Angular Random Walk) of 0.0117 ∘ / h . Compared to the mode-mismatching condition, the bias instability and ARW are improved by 3.25 and 4.49 times respectively.


Sensors ◽  
2019 ◽  
Vol 19 (22) ◽  
pp. 4945 ◽  
Author(s):  
Wenlei Liu ◽  
Sentang Wu ◽  
Zhongbo Wu ◽  
Xiaolong Wu

The novel contribution of this paper is to propose an incremental pose map optimization for monocular vision simultaneous localization and mapping (SLAM) based on similarity transformation, which can effectively solve the scale drift problem of SLAM for monocular vision and eliminate the cumulative error by global optimization. With the method of mixed inverse depth estimation based on a probability graph, the problem of the uncertainty of depth estimation is effectively solved and the robustness of depth estimation is improved. Firstly, this paper proposes a method combining the sparse direct method based on histogram equalization and the feature point method for front-end processing, and the mixed inverse depth estimation method based on a probability graph is used to estimate the depth information. Then, a bag-of-words model based on the mean initialization K-means is proposed for closed-loop feature detection. Finally, the incremental pose map optimization method based on similarity transformation is proposed to process the back end to optimize the pose and depth information of the camera. When the closed loop is detected, global optimization is carried out to effectively eliminate the cumulative error of the system. In this paper, indoor and outdoor environmental experiments are carried out using open data sets, such as TUM and KITTI, which fully proves the effectiveness of this method. Closed-loop detection experiments using hand-held cameras verify the importance of closed-loop detection. This method can effectively solve the scale drift problem of monocular vision SLAM and has strong robustness.


2019 ◽  
Vol 31 (2) ◽  
pp. 025401
Author(s):  
Junyi Hou ◽  
Lei Yu ◽  
Changdi Li ◽  
Shumin Fei

Sign in / Sign up

Export Citation Format

Share Document