Indoor positioning using federated Kalman Filter

2018 ◽  
Author(s):  
Tank Ayabakan ◽  
Feza Kerestecioglu
Keyword(s):  
Kalman Filter ◽  
Indoor Positioning ◽  
Federated Kalman Filter

scholarly journals Attitude and Heading Estimation for Indoor Positioning Based on the Adaptive Cubature Kalman Filter

Micromachines ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 79
Author(s):  
Jijun Geng ◽  
Linyuan Xia ◽  
Dongjin Wu
Keyword(s):  
Kalman Filter ◽  
Angular Rate ◽  
Indoor Positioning ◽  
Location Based Services ◽  
Statistical Characteristics ◽  
Fading Memory ◽  
Limited Memory ◽  
Cubature Kalman Filter ◽  
The Mean ◽  
Heading Estimation

The demands for indoor positioning in location-based services (LBS) and applications grow rapidly. It is beneficial for indoor positioning to combine attitude and heading information. Accurate attitude and heading estimation based on magnetic, angular rate, and gravity (MARG) sensors of micro-electro-mechanical systems (MEMS) has received increasing attention due to its high availability and independence. This paper proposes a quaternion-based adaptive cubature Kalman filter (ACKF) algorithm to estimate the attitude and heading based on smart phone-embedded MARG sensors. In this algorithm, the fading memory weighted method and the limited memory weighted method are used to adaptively correct the statistical characteristics of the nonlinear system and reduce the estimation bias of the filter. The latest step data is used as the memory window data of the limited memory weighted method. Moreover, for restraining the divergence, the filter innovation sequence is used to rectify the noise covariance measurements and system. Besides, an adaptive factor based on prediction residual construction is used to overcome the filter model error and the influence of abnormal disturbance. In the static test, compared with the Sage-Husa cubature Kalman filter (SHCKF), cubature Kalman filter (CKF), and extended Kalman filter (EKF), the mean absolute errors (MAE) of the heading pitch and roll calculated by the proposed algorithm decreased by 4–18%, 14–29%, and 61–77% respectively. In the dynamic test, compared with the above three filters, the MAE of the heading reduced by 1–8%, 2–18%, and 2–21%, and the mean of location errors decreased by 9–22%, 19–31%, and 32–54% respectively by using the proposed algorithm for three participants. Generally, the proposed algorithm can effectively improve the accuracy of heading. Moreover, it can also improve the accuracy of attitude under quasistatic conditions.

scholarly journals Evaluation of Multi-Sensor Fusion Methods for Ultrasonic Indoor Positioning

2021 ◽  
Vol 11 (15) ◽  
pp. 6805
Author(s):  
Khaoula Mannay ◽  
Jesús Ureña ◽  
Álvaro Hernández ◽  
José M. Villadangos ◽  
Mohsen Machhout ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Experimental Tests ◽  
Indoor Positioning ◽  
Location Based Services ◽  
Smart Devices ◽  
Final Position ◽  
Positioning Systems ◽  
Local Positioning System ◽  
Tightly Coupled ◽  
Position Estimate

Indoor positioning systems have become a feasible solution for the current development of multiple location-based services and applications. They often consist of deploying a certain set of beacons in the environment to create a coverage volume, wherein some receivers, such as robots, drones or smart devices, can move while estimating their own position. Their final accuracy and performance mainly depend on several factors: the workspace size and its nature, the technologies involved (Wi-Fi, ultrasound, light, RF), etc. This work evaluates a 3D ultrasonic local positioning system (3D-ULPS) based on three independent ULPSs installed at specific positions to cover almost all the workspace and position mobile ultrasonic receivers in the environment. Because the proposal deals with numerous ultrasonic emitters, it is possible to determine different time differences of arrival (TDOA) between them and the receiver. In that context, the selection of a suitable fusion method to merge all this information into a final position estimate is a key aspect of the proposal. A linear Kalman filter (LKF) and an adaptive Kalman filter (AKF) are proposed in that regard for a loosely coupled approach, where the positions obtained from each ULPS are merged together. On the other hand, as a tightly coupled method, an extended Kalman filter (EKF) is also applied to merge the raw measurements from all the ULPSs into a final position estimate. Simulations and experimental tests were carried out and validated both approaches, thus providing average errors in the centimetre range for the EKF version, in contrast to errors up to the meter range from the independent (not merged) ULPSs.

Attitude Determination by Integration of Multi-Sensors Based on Federated Kalman Filter

2014 ◽  
Vol 602-605 ◽  
pp. 2958-2961
Author(s):  
Tao Lai ◽  
Guang Long Wang ◽  
Wen Jie Zhu ◽  
Feng Qi Gao
Keyword(s):  
Kalman Filter ◽  
Inertial Measurement Unit ◽  
Attitude Determination ◽  
Angular Rate ◽  
General Structure ◽  
Test System ◽  
Measurement Unit ◽  
Storage Test ◽  
Inertial Measurement ◽  
Federated Kalman Filter

Micro inertial measurement unit integration storage test system is a typical multi-sensor information fusion system consists of microsensors. The Federated Kalman filter is applied to micro inertial measurement unit integration storage test system. The general structure and characteristics of Federated Kalman filter is expounded. The four-order Runge-Kutta method based on quaternion differential equation was used to dispose the output angular rate data from gyroscope, and the recurrence expressions was established too. The control system based ARM Cortex-M4 master-slave structure is adopted in this paper. The result shown that the dimensionality reduced algorithm significantly reduces implementation complexity of the method and the amount computation. The filtering effect and real-time performance have much increased than traditionally method.

scholarly journals A SINS/DVL/USBL Integrated Navigation and Positioning IoT System with Multiple Sources Fusion and Federated Kalman Filter

2021 ◽  
Author(s):  
Qinghua Luo ◽  
Xiaozhen Yan ◽  
Chenxu Wang ◽  
Yang Shao ◽  
Zhiquan Zhou ◽  
...  
Keyword(s):  
Kalman Filter ◽  
Autonomous Underwater Vehicle ◽  
Integrated Navigation ◽  
Multiple Sources ◽  
Random Drift ◽  
Position Information ◽  
Federated Kalman Filter ◽  
Ocean Environment ◽  
Important Position ◽  
Multiple Resource

Abstract The navigation and positioning subsystem offers important position information for an autonomous underwater vehicle (AUV) system. It plays a crucial role during the underwater exploration and operations of AUV. Many scholars research underwater navigation and positioning. And many promising methods and systems were presented. However, as the diversity of ocean environment, the random drift of the gyroscope, error accumulation, the diversity of tasks, and other negative factors, the navigation and positioning result is uncertain and incredible. The accuracy, stability and robustness are not guaranteed, which can not meet the increasing application requirement. Therefore, we put forward a SINS/DVL/USBL integrated navigation and positioning IoT system with multiple resource fusion and a federated Kalman filter. In this method, we first present an improved SINS/DVL combined subsystem with filtering gain compensation strategy. The accuracy and stability of the navigation and position system can be enhanced. Secondly, We proposed a USBL positioning subsystem with the Kalman filtering acoustic signals to improve USBL positioning performance. Lastly, we present a federated Kalman Filter to fuse the positioning information from the SINS/DVL combined positioning subsystem and the USBL positioning subsystem. Through the above three methods, we can improve the positioning accuracy and robustness. Comprehensive simulation results indicated the feasibility and effectiveness of the proposed SINS/DVL/USBL integrated navigation and positioning system.

Sign in / Sign up

Export Citation Format

Share Document