Efficient Design Module Capture and Representation for Product Family Reuse

2017 ◽  
Vol 17 (3) ◽  
Author(s):  
Michael Lundin ◽  
Erik Lejon ◽  
Andreas Dagman ◽  
Mats Näsström ◽  
Peter Jeppsson
Keyword(s):  
Computer Aided Design ◽  
Business Models ◽  
Product Family ◽  
Product Lifecycle Management ◽  
Cad Model ◽  
Efficient Design ◽  
Complex Design ◽  
Computer Aided ◽  
Plm System ◽  
Design Capture

New business models and more integrated product development processes require designers to make use of knowledge more efficiently. Capture and reuse are means of coping, but support, techniques, and mechanisms have yet to be sufficiently addressed. This paper consequently explores how computer-aided technologies (CAx) and a computer-aided design (CAD) model-oriented approach can be used to improve the efficiency of design module capture and representation for product family reuse. The first contribution of this paper is the investigation performed at a Swedish manufacturing company and a set of identified challenges related to design capture and representation for reuse in product family development. The second contribution is a demonstrated and evaluated set of systems and tools, which exemplifies how these challenges can be approached. Efficient design capture is achieved by a combination of automated and simplified design capture, derived from the design implementation (CAD model definition) to the extent possible. Different design representations can then be accessed by the designer using the CAD-internal tool interface. A web application is an example of more general-purpose representation to tailor design content, all of which is managed by a product lifecycle management (PLM) system. Design capture is based on a modular view block definition, stored in formal information models, management by a PLM system, for consistent and reliable design content. It was, however, introduced to support the rich and expressive forms of capture and representation required to facilitate understanding, use, and reuse of varied and increasingly complex designs. A key element in being able to describe a complex design and its implementation has been capture and representation of a set of design states. The solution has been demonstrated to effectively be able to capture and represent significant portions of a step-by-step design training material and the implementation of complex design module through a set of design decisions taken. The validity and relevance of the proposed solution is strengthened by the level of acceptance and perceived value from experienced users, together with the fact that the company is implementing parts of it today.

scholarly journals Automatized Evaluation of Students’ CAD Models

2021 ◽  
Vol 11 (4) ◽  
pp. 145
Author(s):  
Nenad Bojcetic ◽  
Filip Valjak ◽  
Dragan Zezelj ◽  
Tomislav Martinec
Keyword(s):  
Computer Aided Design ◽  
Three Dimensional ◽  
Computer Application ◽  
Test Cases ◽  
Cad Model ◽  
Computer Solution ◽  
3D Cad ◽  
Computer Aided ◽  
Cad Models ◽  
Aided Design

The article describes an attempt to address the automatized evaluation of student three-dimensional (3D) computer-aided design (CAD) models. The driving idea was conceptualized under the restraints of the COVID pandemic, driven by the problem of evaluating a large number of student 3D CAD models. The described computer solution can be implemented using any CAD computer application that supports customization. Test cases showed that the proposed solution was valid and could be used to evaluate many students’ 3D CAD models. The computer solution can also be used to help students to better understand how to create a 3D CAD model, thereby complying with the requirements of particular teachers.

scholarly journals COMPLEX USAGE OF 4D INFORMATION MODELLING CONCEPT FOR BUILDING DESIGN, ESTIMATION, SHEDULING AND DETERMINATION OF EFFECTIVE VARIANT

2006 ◽  
Vol 12 (2) ◽  
pp. 91-98 ◽  
Author(s):  
Vladimir Popov ◽  
Saulius Mikalauskas ◽  
Darius Migilinskas ◽  
Povilas Vainiūnas
Keyword(s):  
Computer Aided Design ◽  
Information Technologies ◽  
Investment Project ◽  
Building Design ◽  
Product Lifecycle Management ◽  
Information Modeling ◽  
Information Modelling ◽  
Computer Aided ◽  
Aided Design

With the growth of information technologies in the field of construction industry, the concept of CAD (Computer Aided Design), which denotes just design operations using a computer acquires a new meaning and changes the contents lightening design process based on product modelling and further numerical simulation construction process and facility managing. New definitions as Building Information Modelling (BIM) and Product Lifecycle Management (PLM) are more and more usable as the definition of a new way approaching the design and documentation managing of building projects. The presented computer aided design technology based on the concept of graphical ‐ information modeling of a building, is combined with resource demand calculations, comparison of alternatives and determination of duration of all the stages of investment project life. The software based on this combined 4D PLM model is to be created as a means to manage effectively the investment project, starting from planning, designing, economical calculations, construction and afterwards to manage the finished building and to utilize it.

Software Development Tools to Automate CAD/CAM Systems

2014 ◽  
pp. 190-224 ◽  
Author(s):  
N. A. Fountas ◽  
A. A. Krimpenis ◽  
N. M. Vaxevanidis
Keyword(s):  
Process Planning ◽  
Computer Aided Design ◽  
Data Exchange ◽  
Computational Thinking ◽  
Product Lifecycle Management ◽  
Engineering Software ◽  
Computer Aided ◽  
Cad Cam ◽  
Manufacturing Software ◽  
Software Automation

In today’s modern manufacturing, software automation is crucial element for leveraging novel methodologies and integrate various engineering software environments such Computer aided design (CAD), Computer aided process planning (CAPP), or Computer aided manufacturing (CAM) with programming modules with a common and a comprehensive interface; thus creating solutions to cope with repetitive tasks or allow argument passing for data exchange. This chapter discusses several approaches concerning engineering software automation and customization by employing programming methods. The main focus is given to design, process planning and manufacturing since these phases are of paramount importance when it comes to product lifecycle management. For this reason, case studies concerning software automation and problem definition for the aforementioned platforms are presented mentioning the benefits of programming when guided by successful computational thinking and problem mapping.

Laser Additive Manufacturing

3D Printing ◽  
2017 ◽  
pp. 154-171 ◽  
Author(s):  
Rasheedat M. Mahamood ◽  
Esther T. Akinlabi
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Process ◽  
Computer Aided Design ◽  
Selective Laser Sintering ◽  
Three Dimensional ◽  
Cad Model ◽  
Laser Additive Manufacturing ◽  
Computer Aided ◽  
Manufacturing Technologies ◽  
Aided Design

Laser additive manufacturing is an advanced manufacturing process for making prototypes as well as functional parts directly from the three dimensional (3D) Computer-Aided Design (CAD) model of the part and the parts are built up adding materials layer after layer, until the part is competed. Of all the additive manufacturing process, laser additive manufacturing is more favoured because of the advantages that laser offers. Laser is characterized by collimated linear beam that can be accurately controlled. This chapter brings to light, the various laser additive manufacturing technologies such as: - selective laser sintering and melting, stereolithography and laser metal deposition. Each of these laser additive manufacturing technologies are described with their merits and demerits as well as their areas of applications. Properties of some of the parts produced through these processes are also reviewed in this chapter.

Computer aided design (CAD) model search and retrieval using frequency domain file conversion

2020 ◽  
Vol 36 ◽  
pp. 101554
Author(s):  
Wenjin Li ◽  
Gary Mac ◽  
Nektarios Georgios Tsoutsos ◽  
Nikhil Gupta ◽  
Ramesh Karri
Keyword(s):  
Frequency Domain ◽  
Computer Aided Design ◽  
Cad Model ◽  
Model Search ◽  
Computer Aided ◽  
Aided Design ◽  
Search And Retrieval

A CAD Template Approach to Support Web-Based Customer Centric Product Design

2005 ◽  
Vol 5 (4) ◽  
pp. 381-387 ◽  
Author(s):  
Zahed Siddique ◽  
Karunakar Boddu
Keyword(s):  
Product Design ◽  
Design Process ◽  
Mass Customization ◽  
Computer Aided Design ◽  
Cad Model ◽  
Entire Family ◽  
Web Based ◽  
Computer Aided ◽  
Aided Design ◽  
Configurable Products

In order to provide products that can be tailored to the need of the customer, it is necessary to integrate the customer into the design process. In this paper we present a mass customization computer-aided design (CAD) framework that helps to integrate the customer into the design of user-configurable products. A template approach, which considers both modularity and scaling, is utilized to concisely represent a CAD model of the entire family. The system accepts user selections and parameters to automatically create a CAD model of the customized product in real time and then shows the model to the user. The system is implemented using PRO/ENGINEER and demonstrated through customization of bicycle frames.

Curvature Estimation for Metrology of Non-Rigid Parts

2013 ◽  
Author(s):  
Ali Aidibe ◽  
Souheil-Antoine Tahan
Keyword(s):  
Residual Stresses ◽  
Manufacturing Process ◽  
Computer Aided Design ◽  
Cad Model ◽  
New Approach ◽  
Profile Deviation ◽  
Defect Area ◽  
Computer Aided ◽  
Curvature Estimation ◽  
Aided Design

At the end of the manufacturing process, engineers need to know if a manufactured part fits its computer-aided design (CAD) model and how is the amplitude of inherent variation of manufacturing process. Non-rigid parts, at free state condition, may have a significant different form than their CAD model due to gravity loads; residual stresses induced distortion and/or assembly load. Today, a complicated and expensive specialized fixture is needed to conform these parts. To tackle the above challenges, we present in this paper a new approach for metrology of fixtureless non-rigid parts. This approach combines the curvature properties of manufactured parts with the extreme value statistic test as identification method to distinguish profile deviation due to the manufacturing process from part’s deformation due to the flexibility of the part and to determine whether the tolerance fits the CAD model or no. This approach is tested on simulated typical industrial sheet metal giving satisfying results in terms of percentage of errors in defect area and in peak profile deviation estimated.

scholarly journals Smooth Track and Trade

2012 ◽  
Vol 134 (02) ◽  
pp. 30-31
Author(s):  
Jean Thilmany
Keyword(s):  
Computer Aided Design ◽  
Product Lifecycle Management ◽  
Document Management ◽  
Design System ◽  
Commercial Aircraft ◽  
Related Data ◽  
Document Management System ◽  
Design Documents ◽  
Aided Design ◽  
Plm System

This article discusses implementation of a new product lifecycle management (PLM) system at Parker Hannifin Corp.’s aerospace group. This group employs 6100 across its 18 design centers located around the world, where engineers create parts for commercial aircraft, including helicopters, and many military aircrafts. Managers within the Parker Hannifin aerospace group had been tracking digital documents with a document-management system since the early 1990s. The group recently upgraded its PLM system and is working on supplier access to design documents stored within the system. The new PLM system was rolled out in 2008. The Enovia MatrixOne system is from the same vendor that supplies the company’s main computer-aided design system, which is Catia from Dassault Systèmes of Paris. Regardless of how that project plays out, Parker Hannifin is now miles ahead of where it was only a few years ago when it comes to managing design documents and related data. The smoothing of any chinks among suppliers and in maintaining legacy information has all been worth the upgrade.

Sign in / Sign up

Export Citation Format

Share Document