Uncertainty Analysis of Inflow Conditions on an HPT Gas Turbine Nozzle: Effect on Particle Deposition

2020 ◽  
Author(s):  
R. Friso ◽  
N. Casari ◽  
M. Pinelli ◽  
A. Suman ◽  
F. Montomoli
Keyword(s):  
Gas Turbine ◽  
Energy Efficient ◽  
Gas Turbines ◽  
Particle Deposition ◽  
Operating Conditions ◽  
Wide Range ◽  
And Performance ◽  
Gas Turbine Nozzle ◽  
The Impact ◽  
Inflow Conditions

Abstract Gas turbines (GT) are often forced to operate in harsh environmental conditions. Therefore, the presence of particles in their flow-path is expected. With this regard, deposition is a problem that severely affects gas turbine operation. Components’ lifetime and performance can dramatically vary as a consequence of this phenomenon. Unfortunately, the operating conditions of the machine can vary in a wide range, and they cannot be treated as deterministic. Their stochastic variations greatly affect the forecasting of life and performance of the components. In this work, the main parameters considered affected by the uncertainty are the circumferential hot core location and the turbulence level at the inlet of the domain. A stochastic analysis is used to predict the degradation of a high-pressure-turbine (HPT) nozzle due to particulate ingestion. The GT’s component analyzed as a reference is the HPT nozzle of the Energy-Efficient Engine (E3). The uncertainty quantification technique used is the probabilistic collocation method (PCM). This work shows the impact of the operating conditions uncertainties on the performance and lifetime reduction due to deposition. Sobol indices are used to identify the most important parameter and its contribution to life. The present analysis enables to build confidence intervals on the deposit profile and on the residual creep-life of the vane.

scholarly journals Comprehensive Thermodynamic Analysis of the Humphrey Cycle for Gas Turbines with Pressure Gain Combustion

Energies ◽  
2018 ◽  
Vol 11 (12) ◽  
pp. 3521 ◽  
Author(s):  
Panagiotis Stathopoulos
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Combustion Process ◽  
Ideal Gas ◽  
Point Of View ◽  
Pressure Gain Combustion ◽  
Combustion Technology ◽  
Secondary Air ◽  
And Performance ◽  
The Impact

Conventional gas turbines are approaching their efficiency limits and performance gains are becoming increasingly difficult to achieve. Pressure Gain Combustion (PGC) has emerged as a very promising technology in this respect, due to the higher thermal efficiency of the respective ideal gas turbine thermodynamic cycles. Up to date, only very simplified models of open cycle gas turbines with pressure gain combustion have been considered. However, the integration of a fundamentally different combustion technology will be inherently connected with additional losses. Entropy generation in the combustion process, combustor inlet pressure loss (a central issue for pressure gain combustors), and the impact of PGC on the secondary air system (especially blade cooling) are all very important parameters that have been neglected. The current work uses the Humphrey cycle in an attempt to address all these issues in order to provide gas turbine component designers with benchmark efficiency values for individual components of gas turbines with PGC. The analysis concludes with some recommendations for the best strategy to integrate turbine expanders with PGC combustors. This is done from a purely thermodynamic point of view, again with the goal to deliver design benchmark values for a more realistic interpretation of the cycle.

Experimental Investigations of Pressure Drop in the Combustion Chamber of Gas Turbine

1989 ◽  
Author(s):  
Marek Dzida ◽  
Krzysztof Kosowski
Keyword(s):  
Pressure Drop ◽  
Combustion Chamber ◽  
Gas Turbine ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Experimental Results ◽  
Experimental Investigations ◽  
Relative Pressure ◽  
Wide Range ◽  
Few Data

In bibliography we can find many methods of determining pressure drop in the combustion chambers of gas turbines, but there is only very few data of experimental results. This article presents the experimental investigations of pressure drop in the combustion chamber over a wide range of part-load performances (from minimal power up to take-off power). Our research was carried out on an aircraft gas turbine of small output. The experimental results have proved that relative pressure drop changes with respect to fuel flow over the whole range of operating conditions. The results were then compared with theoretical methods.

Analysis of Part Electric Gas Turbine: A Novel Hybrid Propulsion Concept

2019 ◽  
Author(s):  
M. S. N. Murthy ◽  
Subhash Kumar ◽  
Sheshadri Sreedhara
Keyword(s):  
Gas Turbine ◽  
Electric Motor ◽  
Gas Turbines ◽  
Operating Conditions ◽  
Variable Speed ◽  
Hybrid Propulsion ◽  
Design Point ◽  
Part Load ◽  
Wide Range ◽  
Efficient Option

Abstract A gas turbine engine (GT) is very complex to design and manufacture considering the power density it offers. Development of a GT is also iterative, expensive and involves a long lead time. The components of a GT, viz compressor, combustor and turbine are strongly dependent on each other for the overall performance characteristics of the GT. The range of compressor operation is dependent on the functional and safe limits of surging and choking. The turbine operating speeds are required to be matched with that of compressor for wide range of operating conditions. Due to this constrain, design for optimum possible performance is often sacrificed. Further, once catered for a design point, gas turbines offer low part load efficiencies at conditions away from design point. As a more efficient option, a GT is practically achievable in a split configuration, where the compressor and turbine rotate on different shafts independently. The compressor is driven by a variable speed electric motor. The power developed in the combustor using the compressed air from the compressor and fuel, drives the turbine. The turbine provides mechanical shaft power through a gear box if required. A drive taken from the shaft rotates an electricity generator, which provides power for the compressor’s variable speed electric motor through a power bank. Despite introducing, two additional power conversions compared to a conventional GT, this split configuration named as ‘Part Electric Gas Turbine’, has a potential for new applications and to achieve overall better efficiencies from a GT considering the poor part load characteristics of a conventional GT.

Risk-Based Assessment of Unplanned Outage Events and Costs for Combined-Cycle-Plants

2012 ◽  
Author(s):  
Dale Grace ◽  
Thomas Christiansen
Keyword(s):  
Power Systems ◽  
Gas Turbine ◽  
Cash Flow ◽  
Gas Turbines ◽  
Operational Reliability ◽  
Combined Cycle ◽  
Maintenance Costs ◽  
Wide Range ◽  
Turbine Equipment ◽  
The Impact

Unexpected outages and maintenance costs reduce plant availability and can consume significant resources to restore the unit to service. Although companies may have the means to estimate cash flow requirements for scheduled maintenance and on-going operations, estimates for unplanned maintenance and its impact on revenue are more difficult to quantify, and a large fleet is needed for accurate assessment of its variability. This paper describes a study that surveyed 388 combined-cycle plants based on 164 D/E-class and 224 F-class gas turbines, for the time period of 1995 to 2009. Strategic Power Systems, Inc. (SPS®), manager of the Operational Reliability Analysis Program (ORAP®), identified the causes and durations of forced outages and unscheduled maintenance and established overall reliability and availability profiles for each class of plant in 3 five-year time periods. This study of over 3,000 unit-years of data from 50 Hz and 60 Hz combined-cycle plants provides insight into the types of events having the largest impact on unplanned outage time and cost, as well as the risks of lost revenue and unplanned maintenance costs which affect plant profitability. Outage events were assigned to one of three subsystems: the gas turbine equipment, heat recovery steam generator (HRSG) equipment, or steam turbine equipment, according to the Electric Power Research Institute’s Equipment Breakdown Structure (EBS). Costs to restore the unit to service for each main outage cause were estimated, as were net revenues lost due to unplanned outages. A statistical approach to estimated costs and lost revenues provides a risk-based means to quantify the impact of unplanned events on plant cash flow as a function of class of gas turbine, plant subsystem, and historical timeframe. This statistical estimate of the costs of unplanned outage events provides the risk-based assessment needed to define the range of probable costs of unplanned events. Results presented in this paper demonstrate that non-fuel operation and maintenance costs are increased by roughly 8% in a typical combined-cycle power plant due to unplanned maintenance events, but that a wide range of costs can occur in any single year.

Analysis of Gas Turbine Rotating Cavities by an One-Dimensional Model

2009 ◽  
Author(s):  
Riccardo Da Soghe ◽  
Bruno Facchini ◽  
Luca Innocenti ◽  
Mirko Micio
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Design Tool ◽  
Operating Conditions ◽  
Outer Flow ◽  
One Dimensional ◽  
Wide Range ◽  
Air System ◽  
Secondary Air ◽  
Radial Outflow

Reliable design of secondary air system is one of the main tasks for the safety, unfailing and performance of gas turbine engines. To meet the increasing demands of gas turbines design, improved tools in prediction of the secondary air system behavior over a wide range of operating conditions are needed. A real gas turbine secondary air system includes several components, therefore its analysis is not carried out through a complete CFD approach. Usually, that predictions are performed using codes, based on simplified approach which allows to evaluate the flow characteristics in each branch of the air system requiring very poor computational resources and few calculation time. Generally the available simplified commercial packages allow to correctly solve only some of the components of a real air system and often the elements with a more complex flow structure cannot be studied; among such elements, the analysis of rotating cavities is very hard. This paper deals with a design-tool developed at the University of Florence for the simulation of rotating cavities. This simplified in-house code solves the governing equations for steady one-dimensional axysimmetric flow using experimental correlations both to incorporate flow phenomena caused by multidimensional effects, like heat transfer and flow field losses, and to evaluate the circumferential component of velocity. Although this calculation approach does not enable a correct modeling of the turbulent flow within a wheel space cavity, the authors tried to create an accurate model taking into account the effects of inner and outer flow extraction, rotor and stator drag, leakages, injection momentum and, finally, the shroud/rim seal effects on cavity ingestion. The simplified calculation tool was designed to simulate the flow in a rotating cavity with radial outflow both with a Batchelor and/or Stewartson flow structures. A primary 1D-code testing campaign is available in the literature [1]. In the present paper the authors develop, using CFD tools, reliable correlations for both stator and rotor friction coefficients and provide a full 1D-code validation comparing, due to lack of experimental data, the in house design-code predictions with those evaluated by CFD.

On Compressor Station Layout

2003 ◽  
Author(s):  
Rainer Kurz ◽  
Sebouh Ohanian ◽  
Matt Lubomirsky
Keyword(s):  
Gas Turbine ◽  
Electric Motor ◽  
Operating Conditions ◽  
Performance Characteristics ◽  
General Context ◽  
Operational Flexibility ◽  
Gas Engine ◽  
Wide Range ◽  
The Individual ◽  
The Impact

This paper discusses issues that influence the decision on the arrangement of compressors and the type of equipment in gas pipeline compressor stations. Different concepts such as multiple small units versus single large units are considered, both regarding their impact on the individual station and the overall pipeline. The necessity of standby units is discussed. Various concepts for drivers (gas turbine, gas motor and electric motor) and compressors (centrifugal and reciprocating) are analyzed. The importance of considering all possible operating conditions is stressed. With the wide range of possible operating conditions for the pipeline in mind, the discussion will be brought into the general context of operational flexibility, availability, reliability, installation issues, remote control, and operability of gas turbine driven centrifugal compressors compared to other solutions such as electric motor driven compressors or gas engine driven reciprocating compressors. The impact of different concepts on emissions and fuel cost is discussed. Among the assumptions in this paper are the performance characteristics of the compressor. It will be outlined how these performance characteristics influence the conclusions.

Heavy Duty Gas Turbine Simulation: Global Performances Estimation and Secondary Air System Modifications

2006 ◽  
Author(s):  
Carlo Carcasci ◽  
Bruno Facchini ◽  
Stefano Gori ◽  
Luca Bozzi ◽  
Stefano Traverso
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Cooling System ◽  
Energy System ◽  
Operating Conditions ◽  
Coupled Analysis ◽  
Ambient Conditions ◽  
Air System ◽  
Secondary Air ◽  
And Performance

This paper reviews a modular-structured program ESMS (Energy System Modular Simulation) for the simulation of air-cooled gas turbines cycles, including the calculation of the secondary air system. The program has been tested for the Ansaldo Energia gas turbine V94.3A, which is one of the more advanced models in the family Vx4.3A with a rated power of 270 MW. V94.3A cooling system has been modeled with SASAC (Secondary Air System Ansaldo Code), the Ansaldo code used to predict the structure of the flow through the internal air system. The objective of the work was to investigate the tuning of the analytical program on the basis of the data from design and performance codes in use at Ansaldo Energy Gas Turbine Department. The results, both at base load over different ambient conditions and in critical off-design operating points (full-speed-no-load and minimum-load), have been compared with APC (Ansaldo Performance Code) and confirmed by field data. The coupled analysis of cycle and cooling network shows interesting evaluations for components life estimation and reliability during off-design operating conditions.

scholarly journals Industrial Gas Turbine Performance: Compressor Fouling and On-Line Washing

2014 ◽  
Vol 136 (10) ◽  
Author(s):  
Uyioghosa Igie ◽  
Pericles Pilidis ◽  
Dimitrios Fouflias ◽  
Kenneth Ramsden ◽  
Panagiotis Laskaridis
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Engine Performance ◽  
Operating Conditions ◽  
Compressor Cascade ◽  
Compressor Blades ◽  
Turbine Performance ◽  
Industrial Gas Turbines ◽  
On Line ◽  
The Impact

Industrial gas turbines are susceptible to compressor fouling, which is the deposition and accretion of airborne particles or contaminants on the compressor blades. This paper demonstrates the blade aerodynamic effects of fouling through experimental compressor cascade tests and the accompanied engine performance degradation using turbomatch, an in-house gas turbine performance software. Similarly, on-line compressor washing is implemented taking into account typical operating conditions comparable with industry high pressure washing. The fouling study shows the changes in the individual stage maps of the compressor in this condition, the impact of degradation during part-load, influence of control variables, and the identification of key parameters to ascertain fouling levels. Applying demineralized water for 10 min, with a liquid-to-air ratio of 0.2%, the aerodynamic performance of the blade is shown to improve, however most of the cleaning effect occurred in the first 5 min. The most effectively washed part of the blade was the pressure side, in which most of the particles deposited during the accelerated fouling. The simulation of fouled and washed engine conditions indicates 30% recovery of the lost power due to washing.

Exploration of Compact Combustors for Reheat Cycle Aero Engine Applications

2006 ◽  
Author(s):  
J. Zelina ◽  
D. T. Shouse ◽  
J. S. Stutrud ◽  
G. J. Sturgess ◽  
W. M. Roquemore
Keyword(s):  
Gas Turbine ◽  
Temperature Rise ◽  
Gas Turbines ◽  
Gas Turbine Engine ◽  
Operating Conditions ◽  
Combustion System ◽  
Turbine Engine ◽  
Lean Blowout ◽  
Power Extraction ◽  
Wide Range

An aero gas turbine engine has been proposed that uses a near-constant-temperature (NCT) cycle and an Inter-Turbine Burner (ITB) to provide large amounts of power extraction from the low-pressure turbine. This level of energy is achieved with a modest temperature rise across the ITB. The additional energy can be used to power a large geared fan for an ultra-high bypass ratio transport aircraft, or to drive an alternator for large amounts of electrical power extraction. Conventional gas turbines engines cannot drive ultra-large diameter fans without causing excessively high turbine temperatures, and cannot meet high power extraction demands without a loss of engine thrust. Reducing the size of the combustion system is key to make use of a NCT gas turbine cycle. Ultra-compact combustor (UCC) concepts are being explored experimentally. These systems use high swirl in a circumferential cavity about the engine centerline to enhance reaction rates via high cavity g-loading on the order of 3000 g’s. Any increase in reaction rate can be exploited to reduce combustor volume. The UCC design integrates compressor and turbine features which will enable a shorter and potentially less complex gas turbine engine. This paper will present experimental data of the Ultra-Compact Combustor (UCC) performance in vitiated flow. Vitiation levels were varied from 12–20% oxygen levels to simulate exhaust from the high pressure turbine (HPT). Experimental results from the ITB at atmospheric pressure indicate that the combustion system operates at 97–99% combustion efficiency over a wide range of operating conditions burning JP-8 +100 fuel. Flame lengths were extremely short, at about 50% of those seen in conventional systems. A wide range of operation is possible with lean blowout fuel-air ratio limits at 25–50% below the value of current systems. These results are significant because the ITB only requires a small (300°F) temperature rise for optimal power extraction, leading to operation of the ITB at near-lean-blowout limits of conventional combustor designs. This data lays the foundation for the design space required for future engine designs.

A Fully Non-Adiabatic Flamelet Generated Manifold Model for High Fidelity Modeling of Turbulent Combustion in Gas Turbine Like Conditions

2020 ◽  
Author(s):  
Rakesh Yadav ◽  
Ishan Verma ◽  
Abhijit Modak ◽  
Shaoping Li
Keyword(s):  
Experimental Data ◽  
Gas Turbine ◽  
Turbulent Combustion ◽  
Gas Turbines ◽  
Turbulent Flame ◽  
Operating Conditions ◽  
High Fidelity ◽  
Mixture Density ◽  
Flamelet Generated Manifold ◽  
The Impact

Abstract Flamelet Generated Manifold (FGM) has proven to be an efficient approach to model turbulent combustion across different regimes of combustion. The manifolds are generally created by solving laminar premixed or opposed flow configurations. Gas turbine combustors often involve many strong non-adiabatic events such as multiple temperature boundaries, quenching from cooling and effusion holes, conjugate heat transfer, soot radiation interaction, phase change from spray and the modulation of inlet conditions. The adiabatic assumption of the underlying flamelet generation in the FGM is, therefore, prone to errors in the prediction of flame speed, liner temperatures, and pollutant formation. In this work, a novel approach to generate fully non-adiabatic manifold is proposed and validated. The FGM manifold is created using a series of non-adiabatic flamelets, each flamelet is solved in one-dimensional physical space. The non-adiabatic flamelets are generated with an optimal combination of freely propagating and burner stabilized flames. This hybrid method of the flamelet configuration allows modeling large heat gain and loss without encountering any unrealistic temperature in the flamelet solution. Such fully non-adiabatic flamelets are then convoluted to generate a five-dimensional Non-adiabatic Flamelet Generated Manifold (NFGM) Probability Density Function (PDF.). The average properties such as temperature, mixture density, species concentration, rate of reaction, etc. from PDF are then coupled with the CFD solution. The non-adiabatic flamelets and corresponding NFGM is implemented into ANSYS Fluent software version 2020R1. This approach is validated first for canonical cases, followed by gas turbine like conditions of swirl stabilized methane fueled turbulent flame, developed at DLR Stuttgart as the PRECCINSTA combustor. The experimental data for this combustor is available for multiple operating conditions. A stable operating point (φ = 0.83, P = 30 kW) is chosen. The proposed nonadiabatic NFGM is used with Stress blended eddy simulation (SBES). The current NFGM-SBES results are compared with experimental data as well as the previously published works. The impact of modeling heat release in flamelet is used to analyze the M-shape versus V-shape flame transition and the peaks of the carbon monoxide in mixing shear layers. The findings from the current work, in terms of accuracy, validity and best practices while modeling NFGM-SBES are discussed and summarized. The improved results of NFGM compared to adiabatic FGM are encouraging and provides a potential high-fidelity tool for accurate, yet efficient modeling of turbulent combustion inside gas turbines.

Sign in / Sign up

Export Citation Format

Share Document