Status of District Heating Reactor and its Development Prospects in China

2018 ◽  
Author(s):  
Jing Zhao ◽  
Fei Xie ◽  
Zhihong Liu
Keyword(s):  
Low Temperature ◽  
Nuclear Reactor ◽  
District Heating ◽  
Heating System ◽  
Inherent Safety ◽  
Nuclear Heating Reactor ◽  
New Type ◽  
Nuclear Heating ◽  
Safety Features ◽  
Temperature Heating

Nuclear heating reactor is a new type of power plant that uses nuclear energy as heat source. Low temperature nuclear heating reactor should be the forerunner and main force for developing nuclear heating plant in China. Due to the lower water temperature required by the heating system, this dedicated, non-power generating nuclear reactor works at low temperatures and pressures with inherent safety features. The design, construction and operation of the nuclear heating reactors in various countries in the world were reviewed in this paper, and China’s new demonstration nuclear heating project and NHR-200 low-temperature heating reactor which would be used was discussed in the paper. We put forward the developing route and suggestion for the development of low-temperature heating reactor in China.

A new type of two-supply, one-return, triple pipe-structured heat loss model based on a low temperature district heating system

Energy ◽  
2021 ◽  
Vol 218 ◽  
pp. 119569
Author(s):  
Qian Xu ◽  
Kang Wang ◽  
Zhenwei Zou ◽  
Liqiong Zhong ◽  
Nevzat Akkurt ◽  
...  
Keyword(s):  
Low Temperature ◽  
Heat Loss ◽  
District Heating ◽  
Heating System ◽  
District Heating System ◽  
Loss Model ◽  
Model Based ◽  
New Type

The Halting Process of Natural Circulation in Primary Circuit of Low Temperature Nuclear Heating Reactor

2012 ◽  
Vol 512-515 ◽  
pp. 874-877
Author(s):  
Xue Song Zhang ◽  
Zhi Ping Ju ◽  
Jun Rui Shi ◽  
Wei Zhe Li ◽  
Wen Ping Zhou
Keyword(s):  
Low Temperature ◽  
Natural Circulation ◽  
Primary Circuit ◽  
Nuclear Heating Reactor ◽  
Loss Of Coolant Accident ◽  
Burn Out ◽  
Loss Of Coolant ◽  
Nuclear Heating ◽  
Temperature Heating

Fluctuation of security and flux, when natural circulation was halted in primary circuit of low temperature nuclear heating reactor by experiment during small break loss of coolant accident was studied. This is one of disadvantage aspect to such system. The results of this paper was Heated component won’t burn out while SBLOCA in lower cone in low temperature heating reactor. It was valuable suggestions on the development of commercial nuclear heating reactor.

scholarly journals Technology Pathways and Economic Analysis for Transforming High Temperature to Low Temperature District Heating Systems

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3218
Author(s):  
Pedro Durán ◽  
Herena Torio ◽  
Patrik Schönfeldt ◽  
Peter Klement ◽  
Benedikt Hanke ◽  
...  
Keyword(s):  
Sensitivity Analysis ◽  
Renewable Energy ◽  
High Temperature ◽  
Low Temperature ◽  
Economic Analysis ◽  
District Heating ◽  
Heating System ◽  
District Heating System ◽  
Heating Systems ◽  
District Heating Systems

There are 1454 district heating systems in Germany. Most of them are fossil based and with high temperature levels, which is neither efficient nor sustainable and needs to be changed for reaching the 2050 climate goals. In this paper, we present a case study for transforming a high to low temperature district heating system which is more suitable for renewable energy supply. With the Carnot Toolbox, a dynamic model of a potential district heating system is simulated and then transformed to a low temperature supply. A sensitivity analysis is carried out to see the system performance in case space constrains restrict the transformation. Finally, an economic comparison is performed. Results show that it is technically possible to perform the transformation until a very low temperature system. The use of decentralized renewable sources, decentralized heat storage tanks and the placement of a heat pump on each building are the key points to achieve the transformation. Regarding the sensitivity analysis, the transformation is worth doing until the seasonal storage and solar collector field sizes are reduced to 60% and 80% of their values in the reference case, respectively. The economic analysis shows, however, that it is hard for highly efficient low temperature renewable based heat networks to compete with district heating systems based on a centralized fossile CHP solution. Thus, though the presented transformation is technically possible, there is a strong need to change existing economic schemes and policies for fostering a stronger promotion of renewable energy policies in the heat sector.

scholarly journals Overview of Solutions for the Low-Temperature Operation of Domestic Hot-Water Systems with a Circulation Loop

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3350
Author(s):  
Theofanis Benakopoulos ◽  
William Vergo ◽  
Michele Tunzi ◽  
Robbe Salenbien ◽  
Svend Svendsen
Keyword(s):  
Low Temperature ◽  
Heat Loss ◽  
District Heating ◽  
Heating System ◽  
Hot Water ◽  
Heating Power ◽  
Circulation Loop ◽  
Space Heating ◽  
District Heating System ◽  
Domestic Hot Water

The operation of typical domestic hot water (DHW) systems with a storage tank and circulation loop, according to the regulations for hygiene and comfort, results in a significant heat demand at high operating temperatures that leads to high return temperatures to the district heating system. This article presents the potential for the low-temperature operation of new DHW solutions based on energy balance calculations and some tests in real buildings. The main results are three recommended solutions depending on combinations of the following three criteria: district heating supply temperature, relative circulation heat loss due to the use of hot water, and the existence of a low-temperature space heating system. The first solution, based on a heating power limitation in DHW tanks, with a safety functionality, may secure the required DHW temperature at all times, resulting in the limited heating power of the tank, extended reheating periods, and a DH return temperature of below 30 °C. The second solution, based on the redirection of the return flow from the DHW system to the low-temperature space heating system, can cool the return temperature to the level of the space heating system return temperature below 35 °C. The third solution, based on the use of a micro-booster heat pump system, can deliver circulation heat loss and result in a low return temperature below 35 °C. These solutions can help in the transition to low-temperature district heating.

scholarly journals Small Nuclear Reactor—Nordic District Heating Case Study

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3782 ◽  
Author(s):  
Antti Teräsvirta ◽  
Sanna Syri ◽  
Pauli Hiltunen
Keyword(s):  
Nuclear Reactor ◽  
Computer Software ◽  
District Heating ◽  
Heating System ◽  
Maximum Output ◽  
District Heating System ◽  
Fuel Prices ◽  
Micro Reactors ◽  
Financial Impacts

Small Modular Reactors (SMRs) have been recognized to have potential in decarbonizing district heating, which is currently an urgent sustainability challenge in many European countries. In this paper, the financial impacts of replacing peat and biomass-powered Combined Heat and Power (CHP) plants with heat-only reactors of 24–200 MW power range and maximum output temperatures of 120 °C are studied. A district heating system of a medium-sized Nordic city in Eastern Finland is modeled with EnergyPRO computer software (EMD International A/S, Aalborg, Denmark), which is used to optimize plant units’ production for cost effectiveness. A future scenario is used to predict electricity prices, expenditures from CO2 emission allowances, and fuel prices for the studied case. Results show that the low operating expenditures of CO2 free heat-only reactors would compensate for the revenue losses from electricity sales and that a small number of micro reactors, with power output in the tens of megawatts range each, would be optimal for the studied case. Since investment cost estimates for SMRs still bear significant uncertainties, the subject should be followed in further studies, as heat-only SMRs could provide a profitable alternative for current CHP production in the future.

scholarly journals Impact of Domestic Hot Water Systems on District Heating Temperatures

Energies ◽  
2019 ◽  
Vol 12 (24) ◽  
pp. 4694
Author(s):  
Tina Lidberg ◽  
Thomas Olofsson ◽  
Louise Ödlund
Keyword(s):  
Low Temperature ◽  
District Heating ◽  
Heating System ◽  
Hot Water ◽  
Space Heating ◽  
Circulation System ◽  
District Heating System ◽  
Domestic Hot Water ◽  
Temperature Levels ◽  
The Impact

When buildings become more energy effective, the temperature levels of district heating systems need to be lower to decrease the losses from the distribution system and to keep district heating a competitive alternative on the heating market. For this reason, buildings that are refurbished need to be adapted to suit low-temperature district heating. The aim of this paper is to examine whether four different energy refurbishment packages (ERPs) can be used for lowering the temperature need of a multi-family buildings space heating and domestic hot water (DHW) system as well as to analyse the impact of the DHW circulation system on the return temperature. The results show that for all ERPs examined in this study, the space heating supply temperature agreed well with the temperature levels of a low-temperature district heating system. The results show that the temperature need of the DHW system will determine the supply temperature of the district heating system. In addition, the amount of days with heating demand decreases for all ERPs, which further increases the influence of the DHW system on the district heating system. In conclusion, the DHW system needs to be improved to enable the temperature levels of a low-temperature district heating system.

Sign in / Sign up

Export Citation Format

Share Document