Inter‐aural cross correlation in a sound field represented by spherical harmonics.

2009 ◽  
Vol 125 (4) ◽  
pp. 2545-2545
Author(s):  
Boaz Rafaely ◽  
Amir Avni
2021 ◽  
pp. 1-25
Author(s):  
Hanbo Jiang ◽  
Siyang Zhong ◽  
Han Wu ◽  
Xin Zhang ◽  
Xun Huang ◽  
...  

Abstract This paper focuses on the radiation modes and efficiency of propeller tonal noise. The thickness noise and loading noise model of propellers has been formulated in spherical coordinates, thereby simplifying numerical evaluation of the integral noise source. More importantly, the radiation field can be decomposed and projected to spherical harmonics, which can separate source-observer positions and enable an analysis of sound field structures. Thanks to the parity of spherical harmonics, the proposed model can mathematically explain the fact that thrusts only produce antisymmetric sound waves with respect to the rotating plane. In addition, the symmetric components of the noise field can be attributed to the thickness, as well as drags and radial forces acting on the propeller surface. The radiation efficiency of each mode decays rapidly as noise sources approach the rotating centre, suggesting the radial distribution of aerodynamic loadings should be carefully designed for low-noise propellers. The noise prediction model has been successfully applied to a drone propeller and achieved a reliable agreement with experimental measurements. The flow variables employed as an input of the noise computation were obtained with computational fluid dynamics (CFD), and the experimental data were measured in an anechoic chamber.


2014 ◽  
Vol 635-637 ◽  
pp. 811-814
Author(s):  
Shi Ping Zhang ◽  
Guo Qing Shen ◽  
Lian Suo An

The acoustic thermometry has many advantages, compared with conventional methods of temperature measurements. For this technology, the sound field in normal temperature state of the boiler was simulated; acoustic source signal obtained the pseudo random sequence signal and time delay estimation selected the weighted cross-correlation method. Experiments show that when the boiler is not running, the sound field is enclosure sound field in the furnace. The weighted cross-correlation method can restrain the reverberation and obtain the accurate time delay estimation.


2019 ◽  
Vol 146 (5) ◽  
pp. 3425-3435 ◽  
Author(s):  
Diego Caviedes-Nozal ◽  
Franz M. Heuchel ◽  
Jonas Brunskog ◽  
Nicolai A. B. Riis ◽  
Efren Fernandez-Grande

2020 ◽  
Vol 27 (4) ◽  
pp. 311-331
Author(s):  
Lamberto Tronchin ◽  
Francesca Merli ◽  
Massimiliano Manfren ◽  
Benedetto Nastasi

During the renovation of auditoria and concert halls, the acoustic quality is normally evaluated from measurements of impulse responses. One possibility for evaluating the acoustic quality from the measurements (the simulations) consists of convolving anechoic music with the measured (or simulated) impulse responses. In this way, a psycho-acoustic test is achieved using a virtual sound field representation. The listening room ‘Arlecchino’ at the University of Bologna includes ambisonics (up to fifth order) and stereo-dipole playback for virtual reproduction of sound in rooms. In this article, the effectiveness of the listening room ‘Arlecchino’ is first analysed, comparing acoustic parameters obtained from binaural impulse responses measured in some opera houses (in Italy) and auditorium (in Japan) with those virtually measured after the virtual reconstruction obtained in the listening rooms. The similarity between real and virtual sound fields, has been evaluated by comparing different acoustic parameters calculated by real and virtual sound fields, in four halls in different configurations, by means of the stereo-dipole method. In the second part of the article, the listening room was used to analyse the variation in interaural cross-correlation measurements in rooms obtained considering different anechoic sound signals convolved with the binaural impulse responses, to quantify the variation of the interaural cross correlation with different motifs. For this purpose, two different musical instrument digital interface musical motifs, very different from each other for their music characteristics, have been considered. Moreover, for each musical motif, different sound characteristics (i.e. different musical instruments) were considered, to consider both the rhythmic and timbre aspect.


Sign in / Sign up

Export Citation Format

Share Document