Intensification of Fast Chemical Processes at Interfaces of Two-Component Liquid Media in Tubular Turbulent Reactors

2019 ◽  
Vol 13 (1) ◽  
pp. 25-31
Author(s):  
Al. Al. Berlin ◽  
S. A. Patlazhan ◽  
I. V. Kravchenko ◽  
K. Yu. Prochukhan ◽  
Yu. A. Prochukhan

In this study, plasma discharge in liquids at intensive ultrasonic field above the cavitation threshold has been proven to be of great interest for initiation of various physical and chemical processes. The feature of arc discharge in liquid media is the localization of plasma region near the electrodes and “falling” form of volt-ampere characteristics. In the region of intensive cavitation, the fraction of gas-vapor component in the liquid exists, therefore it can be assumed that the electric breakdown in the cavitation region should become easier, which can result in the initiation of various forms of discharges.


2019 ◽  
Vol 55 (83) ◽  
pp. 12575-12578 ◽  
Author(s):  
Gabriel E. Wagner ◽  
Sebastian Tassoti ◽  
Simon Glanzer ◽  
Eduard Stadler ◽  
Rainer Herges ◽  
...  

ExTra NMR utilises selectively inverted magnetisation for in situ monitoring of fast chemical processes.


Author(s):  
Anastasiya N. Zhanakhova ◽  
Bariya Sh. Dyskina ◽  
Nikolay V. Negutorov ◽  
Nadezhda V. Pykhova

Thermally expanded graphite is obtained from crucible graphite by treatment with oleum in the presence of an oxidizing agent.  The obtained samples of thermally expanded graphite were subjected to ultrasonic dispersion (splitting up) in four liquid media (water, toluene, benzene, acetone). It was shown that in the process of ultrasonic dispersion (splitting), the initial thermally expanded graphite is split into plates with a thickness of several tens to hundreds of nanometers. However, the plates are not single, but are in chaotic clusters with each other. The free bonds of carbon atoms, which are located at the edges of the plates, can play an important role in chemical processes and in the adsorption of substances on the surface of particles of split graphite. It was found that a high degree of perfection of the crystal structure, which is typical of the original graphite, is retained during ultrasonic treatment as compared with mechanical splitting. The change in the specific surface of graphite samples is presented. The main increase in the specific surface of the particles during ultrasonic splitting is created by increasing the area of the surfaces formed during interplanar splitting of graphite plates. Based on the comparison of this parameter, the effect of the used liquids on the splitting process is considered. The high values of the specific surface of the samples split in benzene and toluene are explained by the low values of the surface tension. The good wettability of the graphite surface with benzene, toluene and acetone compared with water allows these liquids to penetrate deep into the pores of graphite. Due to this, maximum splitting is achieved with ultrasonic processing of the mixture. Conclusions on the choice of the optimal liquid medium for dispersing graphite are made.


2014 ◽  
Vol 83 (1) ◽  
pp. 146-160 ◽  
Author(s):  
Stephanie N. Joslin ◽  
Christine Pybus ◽  
Maria Labandeira-Rey ◽  
Amanda S. Evans ◽  
Ahmed S. Attia ◽  
...  

There are a paucity of data concerning gene products that could contribute to the ability ofMoraxella catarrhalisto colonize the human nasopharynx. Inactivation of a gene (mesR) encoding a predicted response regulator of a two-component signal transduction system inM. catarrhalisyielded a mutant unable to grow in liquid media. ThismesRmutant also exhibited increased sensitivity to certain stressors, including polymyxin B, SDS, and hydrogen peroxide. Inactivation of the gene (mesS) encoding the predicted cognate sensor (histidine) kinase yielded a mutant with the same inability to grow in liquid media as themesRmutant. DNA microarray and real-time reverse transcriptase PCR analyses indicated that several genes previously shown to be involved in the ability ofM. catarrhalisto persist in the chinchilla nasopharynx were upregulated in themesRmutant. Two other open reading frames upregulated in themesRmutant were shown to encode small proteins (LipA and LipB) that had amino acid sequence homology to bacterial adhesins and structural homology to bacterial lysozyme inhibitors. Inactivation of bothlipAandlipBdid not affect the ability ofM. catarrhalisO35E to attach to a human bronchial epithelial cell linein vitro. Purified recombinant LipA and LipB fusion proteins were each shown to inhibit human lysozyme activityin vitroand in saliva. AlipA lipBdeletion mutant was more sensitive than the wild-type parent strain to killing by human lysozyme in the presence of human apolactoferrin. This is the first report of the production of lysozyme inhibitors byM. catarrhalis.


1965 ◽  
Vol 5 ◽  
pp. 109-111
Author(s):  
Frederick R. West

There are certain visual double stars which, when close to a node of their relative orbit, should have enough radial velocity difference (10-20 km/s) that the spectra of the two component stars will appear resolved on high-dispersion spectrograms (5 Å/mm or less) obtainable by use of modern coudé and solar spectrographs on bright stars. Both star images are then recorded simultaneously on the spectrograph slit, so that two stellar components will appear on each spectrogram.


Author(s):  
R.J. Mount ◽  
R.V. Harrison

The sensory end organ of the ear, the organ of Corti, rests on a thin basilar membrane which lies between the bone of the central modiolus and the bony wall of the cochlea. In vivo, the organ of Corti is protected by the bony wall which totally surrounds it. In order to examine the sensory epithelium by scanning electron microscopy it is necessary to dissect away the protective bone and expose the region of interest (Fig. 1). This leaves the fragile organ of Corti susceptible to physical damage during subsequent handling. In our laboratory cochlear specimens, after dissection, are routinely prepared by the O-T- O-T-O technique, critical point dried and then lightly sputter coated with gold. This processing involves considerable specimen handling including several hours on a rotator during which the organ of Corti is at risk of being physically damaged. The following procedure uses low cost, readily available materials to hold the specimen during processing ,preventing physical damage while allowing an unhindered exchange of fluids.Following fixation, the cochlea is dehydrated to 70% ethanol then dissected under ethanol to prevent air drying. The holder is prepared by punching a hole in the flexible snap cap of a Wheaton vial with a paper hole punch. A small amount of two component epoxy putty is well mixed then pushed through the hole in the cap. The putty on the inner cap is formed into a “cup” to hold the specimen (Fig. 2), the putty on the outside is smoothed into a “button” to give good attachment even when the cap is flexed during handling (Fig. 3). The cap is submerged in the 70% ethanol, the bone at the base of the cochlea is seated into the cup and the sides of the cup squeezed with forceps to grip it (Fig.4). Several types of epoxy putty have been tried, most are either soluble in ethanol to some degree or do not set in ethanol. The only putty we find successful is “DUROtm MASTERMENDtm Epoxy Extra Strength Ribbon” (Loctite Corp., Cleveland, Ohio), this is a blue and yellow ribbon which is kneaded to form a green putty, it is available at many hardware stores.


Sign in / Sign up

Export Citation Format

Share Document