THE DIFFERENTIAL DIFFERENCE OPERATIONAL FLOATING AMPLIFIER: NEW CMOS REALIZATIONS AND APPLICATIONS

2009 ◽  
Vol 18 (07) ◽  
pp. 1287-1308 ◽  
Author(s):  
EMAN A. SOLIMAN ◽  
SOLIMAN A. MAHMOUD
Keyword(s):  
Analog Circuits ◽  
Cmos Technology ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Variable Gain Amplifiers ◽  
Variable Gain ◽  
Fully Differential ◽  
Filter Performance ◽  
Low Pass ◽  
Band Pass

This paper presents different novel CMOS realizations for the differential difference operational floating amplifier (DDOFA). The DDOFA was first introduced in Ref. 1 and was used to realize different analog circuits like integrators, filters and variable gain amplifiers. New CMOS realizations for the DDOFA are introduced in this literature. Furthermore the DDOFA is modified to realize a fully differential current conveyor (FDCC). Novel CMOS realizations of the FDCC are presented. The FDCC is used to realize second-order band pass–low-pass filter. Performance comparisons between the different realizations of the DDOFA and FDCC are given in this literature. PSPICE simulations of the overall proposed circuits are given using 0.25 μm CMOS Technology from TMSC MOSIS model and dual supply voltages of ±1.5 V.

scholarly journals CMOS CDBA-Based Inverse Filter Structure

2020 ◽  
Vol 9 (3) ◽  
pp. 2226-2231
Keyword(s):  
Cmos Technology ◽  
Experimental Results ◽  
Band Pass Filter ◽  
Inverse Filter ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Filter Structure ◽  
Low Pass ◽  
Band Pass ◽  
High Pass

This paper presents a voltage-mode(VM) tunable multifunction inverse filter configuration employing current differencing buffered amplifiers (CDBA). The presented structure utilizes two CDBAs, two/three capacitors and four/five resistors to realize inverse low pass filter (ILPF), inverse high pass filter (IHPF), inverse band pass filter (IBPF), and inverse band reject filter(IBRF) from the same circuit topology by suitable selection(s) of the branch admittances(s). PSPICE simulations have been performed with 0.18µm TSMC CMOS technology to validate the theory. Some sample experimental results have also been provided using off-the-shelf IC AD844 based CDBA.

scholarly journals A CMOS Programmable Fourth-Order Butterworth Active-RC Low-Pass Filter

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 204 ◽  
Author(s):  
Changchun Zhang ◽  
Long Shang ◽  
Yongkai Wang ◽  
Lu Tang
Keyword(s):  
Radio Frequency Identification ◽  
Supply Voltage ◽  
Cutoff Frequency ◽  
Cmos Technology ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Silicon Area ◽  
Fully Differential ◽  
Low Pass ◽  
Low Sensitivity

This paper presents a low-pass filter (LPF) for an ultra-high frequency (UHF) radio frequency identification (RFID) reader transmitter in standard SMIC 0.18 μm CMOS technology. The active-RC topology and Butterworth approximation function are employed mainly for high linearity and high flatness respectively. Two cascaded fully-differential Tow-Thomas biquads are chosen for low sensitivity to process errors and strong resistance to the imperfection of the involved two-stage fully-differential operational amplifiers. Besides, the LPF is programmable in order to adapt to the multiple data rate standards. Measurement results show that the LPF has the programmable bandwidths of 605/870/1020/1330/1530/2150 kHz, the optimum input 1dB compression point of −7.81 dBm, and the attenuation of 50 dB at 10 times cutoff frequency, with the overall power consumption of 12.6 mW from a single supply voltage of 1.8 V. The silicon area of the LPF core is 0.17 mm2.

scholarly journals Wideband Reconfigurable Integrated Low-Pass Filter for 5G Compatible Software Defined Radio Solutions

Electronics ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 734
Author(s):  
Karolis Kiela ◽  
Marijan Jurgo ◽  
Vytautas Macaitis ◽  
Romualdas Navickas
Keyword(s):  
Software Defined Radio ◽  
Dynamic Range ◽  
Noise Figure ◽  
Harmonic Distortion ◽  
Cmos Process ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Filter Performance ◽  
Low Pass ◽  
Bandwidth Tuning

This article presents a wideband reconfigurable integrated low-pass filter (LPF) for 5G NR compatible software-defined radio (SDR) solutions. The filter uses Active-RC topology to achieve high linearity performance. Its bandwidth can be tuned from 2.5 MHz to 200 MHz, which corresponds to a tuning ratio of 92.8. The order of the filter can be changed between the 2nd, 4th, or 6th order; it has built-in process, voltage, and temperature (PVT) compensation with a tuning range of ±42%; and power management features for optimization of the filter performance across its entire range of bandwidth tuning. Across its entire order, bandwidth, and power configuration range, the filter achieves in-band input-referred third-order intercept point (IIP3) between 32.7 dBm and 45.8 dBm, spurious free dynamic range (SFDR) between 63.6 dB and 79.5 dB, 1 dB compression point (P1dB) between 9.9 dBm and 14.1 dBm, total harmonic distortion (THD) between −85.6 dB and −64.5 dB, noise figure (NF) between 25.9 dB and 31.8 dB and power dissipation between 1.19 mW and 73.4 mW. The LPF was designed and verified using 65 nm CMOS process; it occupies a 0.429 mm2 area of silicon and uses a 1.2 V supply.

scholarly journals Floating Active Inductor Based Trans-Impedance Amplifier in 0.18 μm CMOS Technology for Optical Applications

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1547
Author(s):  
Xiangyu Chen ◽  
Yasuhiro Takahashi
Keyword(s):  
Power Dissipation ◽  
Supply Voltage ◽  
Cmos Technology ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Chip Area ◽  
Active Inductors ◽  
Low Pass ◽  
Optical Applications ◽  
Fifth Order

In this paper, a transimpedance amplifier (TIA) based on floating active inductors (FAI) is presented. Compared with conventional TIAs, the proposed TIA has the advantages of a wider bandwidth, lower power dissipation, and smaller chip area. The schematics and characteristics of the FAI circuit are explained. Moreover, the proposed TIA employs the combination of capacitive degeneration, the broadband matching network, and the regulated cascode input stage to enhance the bandwidth and gain. This turns the TIA design into a fifth-order low pass filter with Butterworth response. The TIA is implemented using 0.18 μ m Rohm CMOS technology and consumes only 10.7 mW with a supply voltage of 1.8 V. When used with a 150 fF photodiode capacitance, it exhibits the following characteristics: gain of 41 dB Ω and −3 dB frequency of 10 GHz. This TIA occupies an area of 180 μ m × 118 μ m.

scholarly journals High-Performance RF Balanced Microstrip Mixer Configuration for Cryogenic and Room Temperatures

Electronics ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 102
Author(s):  
Noy Citron ◽  
Eldad Holdengreber ◽  
Oz Sorkin ◽  
Shmuel E. Schacham ◽  
Eliyahu Farber
Keyword(s):  
High Performance ◽  
Schottky Diodes ◽  
Band Pass Filter ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Noise Rejection ◽  
Low Pass ◽  
Hybrid Coupler ◽  
Band Pass ◽  
Simulation Results

A high-performance S-band down-conversion microstrip mixer, for operation from 77 K to 300 K, is described. The balanced mixer combines a 90 degree hybrid coupler, two Schottky diodes, a band pass filter, and a low pass filter. The coupler phase shift drastically improves noise rejection. The circuit was implemented according to the configuration obtained from extensive simulation results based on electromagnetic analysis. The experimental results agreed well with the simulation results, showing a maximum measured insertion loss of 0.4 dB at 2 GHz. The microstrip mixer can be easily adjusted to different frequency ranges, up to about 50 GHz, through the proper choice of microstrip configuration. This novel S-band cryogenic mixer, implemented without resorting to special components, shows a very high performance at liquid nitrogen temperatures, making this mixer very suitable for high-temperature superconductive applications, such as front-ends.

A 240-MHz Low-Pass Filter With Variable Gain in 65-nm CMOS for a UWB Radio Receiver

2009 ◽  
Vol 56 (7) ◽  
pp. 1488-1499 ◽  
Author(s):  
V. Saari ◽  
M. Kaltiokallio ◽  
S. Lindfors ◽  
J. Ryynanen ◽  
K.A.I. Halonen
Keyword(s):  
Radio Receiver ◽  
Pass Filter ◽  
Low Pass Filter ◽  
Variable Gain ◽  
Low Pass ◽  
Uwb Radio
Sign in / Sign up

Export Citation Format

Share Document