C-14 Invited—High Energy X-ray Optics for Synchrotron Radiation

2009 ◽  
Vol 24 (2) ◽  
pp. 165-165
Author(s):  
B. Lengeler
2021 ◽  
Vol 92 (6) ◽  
pp. 063506
Author(s):  
N. R. Pereira ◽  
A. T. Macrander ◽  
E. Kasman ◽  
X.-R. Huang ◽  
E. O. Baronova

1990 ◽  
Vol 68 (6) ◽  
pp. 2719-2722 ◽  
Author(s):  
A. Matsumuro ◽  
M. Kobayashi ◽  
T. Kikegawa ◽  
M. Senoo

Author(s):  
Lonny E. Berman ◽  
J.B. Hastings ◽  
D. Peter Siddons ◽  
Masaki Koike ◽  
Vivian Stojanoff ◽  
...  

2013 ◽  
Vol 772 ◽  
pp. 193-199 ◽  
Author(s):  
Carsten Ohms ◽  
Rene V. Martins

Bi-metallic piping welds are frequently used in light water nuclear reactors to connect ferritic steel pressure vessel nozzles to austenitic stainless steel primary cooling piping systems. An important aspect for the integrity of such welds is the presence of residual stresses. Measurement of these residual stresses presents a considerable challenge because of the component size and because of the material heterogeneity in the weld regions. The specimen investigated here was a thin slice cut from a full-scale bi-metallic piping weld mock-up. A similar mock-up had previously been investigated by neutron diffraction within a European research project called ADIMEW. However, at that time, due to the wall thickness of the pipe, stress and spatial resolution of the measurements were severely restricted. One aim of the present investigations by high energy synchrotron radiation and neutrons used on this thin slice was to determine whether such measurements would render a valid representation of the axial strains and stresses in the uncut large-scale structure. The advantage of the small specimen was, apart from the easier manipulation, the fact that measurement times facilitated a high density of measurements across large parts of the test piece in a reasonable time. Furthermore, the recording of complete diffraction patterns within the accessible diffraction angle range by synchrotron X-ray diffraction permitted mapping the texture variations. The strain and stress results obtained are presented and compared for the neutron and synchrotron X-ray diffraction measurements. A strong variation of the texture pole orientations is observed in the weld regions which could be attributed to individual weld torch passes. The effect of specimen rocking on the scatter of the diffraction data in the butt weld region is assessed during the neutron diffraction measurements.


1998 ◽  
Author(s):  
Andreas K. Freund ◽  
Jacques P. Sellschop ◽  
Konrad Lieb ◽  
Sylvain Rony ◽  
Clemens Schulze-Briese ◽  
...  

Materialia ◽  
2020 ◽  
Vol 12 ◽  
pp. 100784 ◽  
Author(s):  
C.R. Reynolds ◽  
Z. Herl ◽  
N.A. Ley ◽  
D. Choudhuri ◽  
J.T. Lloyd ◽  
...  

2006 ◽  
Author(s):  
Mikhail Gubarev ◽  
Brian Ramsey ◽  
Darell Engelhaupt ◽  
Thomas Kester ◽  
Chet Speegle

1991 ◽  
Vol 35 (B) ◽  
pp. 995-1000
Author(s):  
J.V. Gilfrich ◽  
E.F. Skelton ◽  
S.B. Qadri ◽  
N.E. Moulton ◽  
D.J. Nagel ◽  
...  

AbstractIt has been well established over recent years that synchrotron radiation possesses some unique features as a source of primary x-rays for x-ray fluorescence analysis. Advantage has been taken of the high intensity emanating from the bending magnets of storage rings to develop x-ray microprobes utilizing apertures or focussing optics, or both, to provide a beam spot at the specimen of the order of micrometers. The use of insertion devices wigglers and undulatora, can further increase the available intensity, especially for the high energy photons. Beam Line X-17C at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory, accepts the unmodified continuum radiation from a superconducting wiggler in the storage ring. Some initial XRF measurements have been made on this beam line using apertures in the 10 to 100 micrometer range. The fluorescent radiation was measured by an intrinsic Ge detector having an energy resolution of 300 eV at 15 kev, and located at 90° to the incident beam in the plane of the electron orbit. In samples containing many elements, detection limits of a few ppm were achieved with 100 μm beams.


Sign in / Sign up

Export Citation Format

Share Document