scholarly journals Voltage-Mode All-Pass Filters Including Minimum Component Count Circuits

2007 ◽  
Vol 2007 ◽  
pp. 1-5 ◽  
Author(s):  
Sudhanshu Maheshwari
Keyword(s):  
Active Element ◽  
Passive Component ◽  
Output Impedance ◽  
Passive Components ◽  
First Order ◽  
Voltage Mode ◽  
Pspice Simulation ◽  
Simulation Results ◽  
A Current

This paper presents two new first-order voltage-mode all-pass filters using a single-current differencing buffered amplifier and four passive components. Each circuit is compatible to a current-controlled current differencing buffered amplifier with only two passive elements, thus resulting in two more circuits, which employ a capacitor, a resistor, and an active element, thus using a minimum of active and passive component counts. The proposed circuits possess low output impedance, and hence can be easily cascaded for voltage-mode systems. PSPICE simulation results are given to confirm the theory.

scholarly journals Tunable First-Order Resistorless All-Pass Filter with Low Output Impedance

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Parveen Beg
Keyword(s):  
Building Block ◽  
Active Element ◽  
Higher Order ◽  
Current Conveyor ◽  
Passive Component ◽  
Output Impedance ◽  
Pass Filter ◽  
Mos Transistor ◽  
First Order ◽  
Voltage Mode

This paper presents a voltage mode cascadable single active element tunable first-order all-pass filter with a single passive component. The active element used to realise the filter is a new building block termed as differential difference dual-X current conveyor with a buffered output (DD-DXCCII). The filter is thus realized with the help of a DD-DXCCII, a capacitor, and a MOS transistor. By exploiting the low output impedance, a higher order filter is also realized. Nonideal and parasitic study is also carried out on the realised filters. The proposed DD-DXCCII filters are simulated using TSMC the 0.25 µm technology.

Some Analog Filters of Reduced Complexity with Shelving and Multifunctional Characteristics

2018 ◽  
Vol 27 (10) ◽  
pp. 1850150 ◽  
Author(s):  
Sudhanshu Maheshwari
Keyword(s):  
Power Supply ◽  
Active Element ◽  
Current Conveyor ◽  
Analog Filters ◽  
First Order ◽  
Voltage Mode ◽  
Experimental Support ◽  
Reduced Complexity ◽  
Simulation Results ◽  
The One

This paper presents first-order voltage-mode filters using a single current conveyor with an additional X-stage, and passive elements. The new circuits have multifunction capability, and also realize low-shelf, high-shelf and band-shelf functions. The study is carried out on the effects of non-idealities, parasitic elements, and loading on the performance of proposed circuits. Active and passive sensitivities are also analyzed. The active element, extra-X current conveyor used for designing new circuits is simpler than most of the one active element and two passive elements’ based circuits. Detailed comparisons are carried out with relevant available works, and the new circuits are found to be more compact and exhibit higher frequency performances. The simulation results using 0.25[Formula: see text][Formula: see text]m CMOS parameters with [Formula: see text]1.25[Formula: see text]V power-supply are shown to verify the proposed circuits. The proposed circuits are also verified through simulations. Experimental support is given using AD-844 ICs to strengthen the validity of the proposed circuits.

NOVEL VOLTAGE-MODE CASCADABLE ALL-PASS SECTIONS EMPLOYING GROUNDED PASSIVE COMPONENTS

2013 ◽  
Vol 22 (01) ◽  
pp. 1250065 ◽  
Author(s):  
SUDHANSHU MAHESHWARI ◽  
JITENDRA MOHAN ◽  
DURG SINGH CHAUHAN
Keyword(s):  
Current Conveyors ◽  
Output Impedance ◽  
High Input ◽  
Passive Components ◽  
Quadrature Oscillator ◽  
Pspice Simulations ◽  
First Order ◽  
Voltage Mode ◽  
Differential Voltage ◽  
Parasitic Effects

This paper presents two new first-order voltage-mode (VM) cascadable all-pass (AP) sections, employing two differential voltage current conveyors (DVCCs) and three grounded passive components. Both circuits possess high input and low output impedance, which makes them easily cascadable. Non-ideality aspects and parasitic effects are also studied. As an application, a quadrature oscillator is designed using the proposed circuit. The proposed circuits are verified through PSPICE simulations using 0.5 μm CMOS parameters.

ADDITIONAL HIGH-INPUT LOW-OUTPUT IMPEDANCE VOLTAGE-MODE ALL-PASS SECTIONS

2014 ◽  
Vol 23 (06) ◽  
pp. 1450077 ◽  
Author(s):  
JITENDRA MOHAN ◽  
SUDHANSHU MAHESHWARI
Keyword(s):  
Second Generation ◽  
Current Conveyor ◽  
Output Impedance ◽  
High Input ◽  
First Order ◽  
Voltage Mode ◽  
Fully Differential ◽  
Differential Voltage ◽  
Ideal Study ◽  
Simulation Results

To extend the existing knowledge on first-order voltage-mode all-pass filters, this paper presents two novel first-order voltage-mode all-pass sections, each employing single fully differential second-generation current conveyor (FDCCII) being used as the newly obtained fully differential voltage conveyor (FDVC), a resistor and a grounded capacitor. Both the proposed circuits possess high-input and low-output impedance feature, which makes the proposed circuits ideal for voltage-mode systems. Non-ideal study along with simulation results is given for validation.

High Performance Voltage-Mode Tunable All-Pass Section

2015 ◽  
Vol 24 (06) ◽  
pp. 1550080 ◽  
Author(s):  
S. Maheshwari ◽  
D. Agrawal
Keyword(s):  
Process Parameters ◽  
High Performance ◽  
Current Conveyor ◽  
Passive Component ◽  
Output Impedance ◽  
High Input ◽  
Pass Filter ◽  
Voltage Mode ◽  
Pspice Simulation ◽  
Trade Offs

This paper presents a voltage-mode (VM) tunable all-pass section, employing a grounded capacitor and a newly introduced current conveyor with an extra X stage. The proposed all-pass filter uses grounded capacitor as the only passive component and benefits from high input and low output impedance. The proposed circuit exhibits eight performance features without trade-offs, as compared to carefully chosen 25 published works. The functionality of the proposed element is verified through PSPICE simulation using 0.25-μm process parameters. An application of second order is also incorporated.

NEW REALIZATIONS OF VOLTAGE-MODE QUADRATURE OSCILLATORS USING CURRENT DIFFERENCING BUFFERED AMPLIFIERS

2010 ◽  
Vol 19 (05) ◽  
pp. 1069-1076 ◽  
Author(s):  
ABHIRUP LAHIRI
Keyword(s):  
Point Of View ◽  
Passive Components ◽  
Voltage Mode ◽  
Sinusoidal Oscillators ◽  
Integration Point ◽  
Condition Of Oscillation ◽  
Simulation Results ◽  
Quadrature Oscillators

A number of sinusoidal oscillators using current differencing buffered amplifiers (CDBAs) have been reported in the literature. However, only three of them are canonic quadrature oscillators (i.e., requiring two capacitors). The aim of this letter is to present additional realizations of single/dual-resistance-controlled quadrature oscillators using CDBAs. Four voltage-mode quadrature oscillators are proposed, which provide the following advantageous features: (i) use of reduced and canonic component count, viz. two CDBAs, three/four resistors and two capacitors, (ii) all passive components are grounded or virtually grounded, which is favorable from integration point of view and (iii) independent and non-interactive resistor control of the condition of oscillation (CO) and the frequency of oscillation (FO). Simulation results verifying the workability of the proposed circuits have been included.

GENERATION OF OSCILLATORS BASED ON GROUNDED CAPACITOR CURRENT CONVEYORS WITH MINIMUM PASSIVE COMPONENTS

2009 ◽  
Vol 18 (05) ◽  
pp. 857-873 ◽  
Author(s):  
AHMED M. SOLIMAN
Keyword(s):  
Negative Resistance ◽  
Passive Component ◽  
Current Conveyors ◽  
Spice Simulation ◽  
Feature Size ◽  
Passive Components ◽  
The Family ◽  
Simulation Results ◽  
Inverting Current Conveyors ◽  
Oscillator Circuits

In this paper, eight new Frequency Dependent Negative Resistance (FDNR) circuits using two current conveyors or inverting current conveyors or a combination of the two types are introduced. The proposed circuits are canonic and they use two grounded capacitors and one floating resistor. The generation of grounded capacitor minimum passive component oscillators from the FDNR circuits is also considered. It is found that two of the recently reported attractive oscillators are among the family of the generated oscillator circuits. Additional six new oscillator circuits based on the FDNR circuits are introduced in this paper. Spice simulation results using technology: SCN 05 feature size 0.5 μm, MOSIS Vendor: AGILENT to demonstrate the practicality of the proposed oscillators are included.

scholarly journals Voltage Mode Pulse Width Modulator Using Single Operational Transresistance Amplifier

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Rajeshwari Pandey ◽  
Neeta Pandey ◽  
Sajal K. Paul
Keyword(s):  
Theoretical Analysis ◽  
Pulse Width ◽  
Relaxation Oscillator ◽  
Experimental Results ◽  
Voltage Mode ◽  
Pspice Simulation ◽  
Operational Transresistance Amplifier ◽  
Pulse Width Modulator ◽  
Simulation Results ◽  
Oscillator Output

This paper presents a voltage mode pulse width modulator (PWM) using single operational transresistance amplifier (OTRA). The proposed PWM consists of a relaxation oscillator output which is modulated using modulating signal. PSPICE simulation results and experimental results have been included to verify the theoretical analysis.

Sign in / Sign up

Export Citation Format

Share Document