scholarly journals Design of CPW-Fed Antenna with Defected Substrate for Wideband Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-10 ◽  
Author(s):  
Amar Sharma ◽  
Puneet Khanna ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Group Delay ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Radiation Characteristics ◽  
High Frequency Structure Simulator ◽  
X Band ◽  
Good Agreement

A CPW-fed defected substrate microstrip antenna is proposed. The proposed antenna shows wideband applications by choosing suitable defected crown shaped substrate. Defected substrate also reduces the size of an antenna. The radiating patch of proposed antenna is taken in the form of extended U-shape. The space around the radiator is utilized by extending the ground plane on both sides of radiator. Simulation of proposed antenna is done on Ansoft’s High Frequency Structure Simulator (HFSS v. 14). Measured results are in good agreement with simulated results. The prototype is taken with dimensions 36 mm × 42 mm × 1.6 mm that achieves good return loss, constant group delay, and good radiation characteristics within the entire operating band from 4.5 to 13.5 GHz (9.0 GHz) with 100% impedance bandwidth at 9.0 GHz centre frequency. Thus, the proposed antenna is applicable for C and X band applications.

scholarly journals A CPW - Fed Octagonal Ring Shaped Wide Band Antenna for Wireless Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 87-92 ◽  
Author(s):  
P. Khanna ◽  
A. Sharma ◽  
A. K. Singh ◽  
A. Kumar
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Wide Band ◽  
Impedance Bandwidth ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
High Impedance ◽  
Ring Antenna ◽  
Operating Bandwidth

A CPW – Fed octagonal ring shaped antenna for wideband operation is presented. The radiating patch of proposed octagonal ring antenna consists of symmetrical slot in place of conventional annular ring microstrip antenna. The ground plane consists of two rectangular slots, while the radiator and the ground plane are on same plane that utilizes the space available around the radiator. The proposed antenna is simulated through Ansoft’s High Frequency Structure Simulator (HFSS). Measured result shows balanced agreement with the simulated results. The prototype is taken with dimensions 47 mm × 47 mm × 1.6 mm that achieves good return loss, constant group delay and good radiation patterns over the entire operating bandwidth of 2.0 to 9.5 GHz (7.5 GHz). The proposed antenna achieves high impedance bandwidth of 130%. Thus, the proposed antenna is applicable for S and C band applications.

scholarly journals CPW-Fed Flexible Ultra-Wideband Antenna for IoT Applications

Micromachines ◽  
2021 ◽  
Vol 12 (4) ◽  
pp. 453
Author(s):  
Sharadindu Gopal Kirtania ◽  
Bachir Adham Younes ◽  
Abdul Rakib Hossain ◽  
Tutku Karacolak ◽  
Praveen Kumar Sekhar
Keyword(s):  
High Frequency ◽  
Return Loss ◽  
Coplanar Waveguide ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Uwb Antenna ◽  
Radiation Characteristics ◽  
Antenna Structure ◽  
Iot Applications ◽  
Good Agreement

In this article, an inkjet-printed circular-shaped monopole ultra-wideband (UWB) antenna with an inside-cut feed structure was implemented on a flexible polyethylene terephthalate (PET) substrate. The coplanar waveguide (CPW)-fed antenna was designed using ANSYS high-frequency structural simulator (HFSS), which operates at 3.04–10.70 GHz and 15.18–18 GHz (upper Ku band) with a return loss < −10 dB and a VSWR < 2. The antenna, with the dimensions of 47 mm × 25 mm × 0.135 mm, exhibited omnidirectional radiation characteristics over the entire impedance bandwidth, with an average peak gain of 3.94 dBi. The simulated antenna structure was in good agreement with the experiment’s measured results under flat and bending conditions, making it conducive for flexible and wearable Internet of things (IoT) applications.

scholarly journals Inverted S-Shaped Compact Antenna for X-Band Applications

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
M. Samsuzzaman ◽  
M. T. Islam
Keyword(s):  
High Frequency ◽  
Ground Plane ◽  
Performance Criteria ◽  
Impedance Bandwidth ◽  
Suitable Candidate ◽  
Compact Antenna ◽  
Rectangular Patch ◽  
Triple Frequency ◽  
X Band ◽  
Good Agreement

A novel probe-fed compact inverted S-shaped multifrequency patch antenna is designed. By employing two rectangular slots that change the conventional rectangular patch into an inverted S-shaped patch, the antenna is able to operate in triple frequency in the X-band. The performance criteria of the proposed design have been experimentally verified by fabricating a printed prototype. The measured results show that the −10 dB impedance bandwidth of the proposed antenna at lower band is 5.02% (8.69–9.14 GHz), at middle band is 9.13% (10.47–11.48 GHz), and at upper band is 3.79% (11.53–11.98 GHz). Two elliptical slots are introduced in the ground plane to increase the peak gain. The antenna is excited by a simple probe feeding mechanism. The overall antenna dimension is  0.52λ×0.60λ×0.046λat a lower resonance frequency of 9.08 GHz. The antenna configuration and parametric investigation are conducted with the help of the high frequency structural simulator, and a good agreement is achieved between the simulated and measured data. The stable gain, omnidirectional radiation pattern, and consistent radiation efficiency in the achieved operating band make the proposed antenna a suitable candidate for X-band applications.

Improvement in Depth of Return Loss of Microstrip Antenna for S-Band Applications

2017 ◽  
Vol 27 (04) ◽  
pp. 1850058 ◽  
Author(s):  
Jaspal Singh Khinda ◽  
Malay Ranjan Tripathy ◽  
Deepak Gambhir
Keyword(s):  
Microstrip Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Impedance Bandwidth ◽  
Network Analyzer ◽  
Fractal Antenna ◽  
Line Position ◽  
Mismatch Loss ◽  
Loss Formula ◽  
Good Agreement

For S-band applications, a microstrip fractal antenna is designed by extending narrow impedance bandwidth into wide impedance bandwidth with use of partial ground plane. In the designed fractal antenna, the six elliptical slots in ground plane and two elliptical slots in radiating patch are embedded to improve the depth of return loss. Further, the parametric study is performed on width of microstrip feeding line, position/size of ellipses in radiating patch and ground plane to achieve mismatch loss [Formula: see text] 0.044[Formula: see text]dB and power delivered to antenna 99%, i.e., return loss [Formula: see text][Formula: see text]dB for S-band. The simulated antenna results are obtained using electromagnetic solver software and fabricated antenna results are measured using Vector Network Analyzer Bench MS46322A and they are found to be in good agreement.

scholarly journals Inset Fed Horizontal Wide U-Shaped Slotted Microstrip Antenna for Multi-band Operation

2019 ◽  
Vol 8 (3) ◽  
pp. 6155-6159
Keyword(s):  
Wireless Communication ◽  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Antenna Design ◽  
Band Width ◽  
High Frequency Structure Simulator ◽  
X Band ◽  
Multi Band

A multi-band horizontal wide U-slotted patch antenna is proposed for wireless communication. Along with the horizontal wide U-slot, the proposed antenna also consists of four truncated corners along with inset feeding for proper antenna matching. The proposed antenna design has three distinct simulated resonating frequencies i.e., 4.7 GHz, 6.8 GHz and 9.8 GHz having -10 dB return loss band width as 111.1 MHz, 245.1 MHz, 998.6 MHz respectively while measured resonating frequencies are observed as 4.75 GHz, 7.1 GHz and 10.2 GHz having -10 dB return loss band width as 539.1 MHz , 410.6 MHz , 2.0834 GHz respectively . The proposed antenna results are examined using High frequency structure simulator tool and then verified through measured results . Thus, the proposed antenna is applicable for frequency bands like S band, C band and X band .

Comb Shaped Triple Band Microstrip Antenna for Wireless Communication

2021 ◽  
Vol 9 (4) ◽  
pp. 379-382
Keyword(s):  
Dielectric Constant ◽  
Wireless Communication ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Return Loss ◽  
Experimental Results ◽  
High Frequency Structure Simulator ◽  
Frequency Structure ◽  
Triple Band

A comb shaped microstrip antenna is designed by loading rectangular slots on the patch of the antenna. The antenna resonating at three different frequencies f1 = 5.35 GHz, f2 = 6.19 GHz and f3= 8.15 GHz. The designed antenna is simulated on High Frequency Structure Simulator software [HFSS] and the antenna is fabricated using substrate glass epoxy with dielectric constant 4.4 having dimension of 8x4x0.16 cms. The antenna shows good return loss, bandwidth and VSWR. Experimental results are observed using Vector Analyzer MS2037C/2.

scholarly journals Design of a Compact CPW-Fed Monopole Antenna With Asymmetrical Hexagonal Slot Loaded Ground Structure for C/X/Ku Band Applications

2020 ◽  
Vol 16 (1) ◽  
pp. 15-22
Author(s):  
Ajay Kumar Dwivedi ◽  
Brijesh Mishra ◽  
Vivek Singh ◽  
Pramod Narayan Tripathi ◽  
Ashutosh Kumar Singh
Keyword(s):  
High Frequency ◽  
Ground Plane ◽  
Directional Pattern ◽  
Ultra Wideband ◽  
Impedance Bandwidth ◽  
Ground Structure ◽  
High Frequency Structure Simulator ◽  
Performance Matrix ◽  
Novel Design ◽  
Ku Band

AbstractA novel design of ultra-wideband CPW-fed compact monopole patch antenna is presented in the article. The size of the antenna is 22 × 18 × 1.6 mm and it operates well over an ultra-wideband frequency range 4.86–13.66 GHz (simulated) and 4.93–13.54 GHz (measured) covering C, X and partial Ku band applications. The proposed design consists of a defected ground plane and U-shape radiating patch along with two square shape parasitic patches in order to achieve the ultra-wideband (UWB) operations. The performance matrix is validated through measured results that indicate the wide impedance bandwidth (93.2 %) with maximum gain of 4 dBi with nearly 95 % of maximum radiation efficiency; moreover, the 3D gain pattern manifests approximately omni-directional pattern of the proposed design. The prototype has been modelled using HFSS (High Frequency Structure Simulator-18) by ANSYS, fabricated and tested using vector network analyser E5071C.

Optimum Patch Dimension Ratio of T-Shaped Microstrip Antenna

2013 ◽  
Vol 684 ◽  
pp. 303-306
Author(s):  
Eugene Rhee ◽  
Ji Hoon Lee
Keyword(s):  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Return Loss ◽  
Impedance Matching ◽  
Feeding Method ◽  
High Frequency Structure Simulator ◽  
Feeding Methods ◽  
Coaxial Probe ◽  
Dimension Ratio

There are various feeding methods of antenna like as coaxial probe, coupling, parasitic elements, and impedance matching. This paper adopted the microstrip line method as the feeding method of the antenna. The high frequency structure simulator is used to analyze the characteristics of the T-shaped microstrip antenna with various patch dimensions. In comparison with the basic microstrip antenna, this proposed T-shaped microstrip antenna with 40.38 % of patch dimensions has the optimum characteristics of resonant frequency, return loss, and radiation pattern at 2.0 GHz band.

Bandwidth improvement of planar antennas using a single-layer metamaterial substrate for X-band application

2020 ◽  
Vol 12 (9) ◽  
pp. 906-914
Author(s):  
O. Borazjani ◽  
M. Naser-Moghadasi ◽  
J. Rashed-Mohassel ◽  
R. A. Sadeghzadeh
Keyword(s):  
Microstrip Antenna ◽  
Single Layer ◽  
Dual Band ◽  
Planar Antennas ◽  
Radiation Characteristics ◽  
Dual Band Antenna ◽  
X Band ◽  
Field Radiation ◽  
Metallic Ring ◽  
Good Agreement

AbstractTo prevent far-field radiation characteristics degradation while increasing bandwidth, an attempt has been made to design and fabricate a microstrip antenna. An electromagnetic band gap (EBG) structure, including a layer of a metallic ring on a layer of Rogers 4003C substrate, is used. For a better design, a patch antenna with and without the EBG substrate has been simulated. The results show that the bandwidth can be improved up to 1.6 GHz in X-band by adding the EBG substrate. Furthermore, using this structure, a dual-band antenna was obtained as well. Finally, to validate the simulation results, a comparison has been done between simulation data and experimental results which demonstrate good agreement.

scholarly journals A Defected Structure Shaped CPW-Fed Wideband Microstrip Antenna for Wireless Applications

2016 ◽  
Vol 2016 ◽  
pp. 1-7 ◽  
Author(s):  
Puneet Khanna ◽  
Amar Sharma ◽  
Kshitij Shinghal ◽  
Arun Kumar
Keyword(s):  
Patch Antenna ◽  
High Frequency ◽  
Microstrip Antenna ◽  
Microstrip Line ◽  
Coplanar Waveguide ◽  
Network Analyzer ◽  
Large Space ◽  
Wireless Applications ◽  
High Frequency Structure Simulator ◽  
Good Agreement

A coplanar waveguide- (CPW-) fed compact wideband defected structure shaped microstrip antenna is proposed for wireless applications. Defected structure is produced by cutting theUshape antenna in the form of two-sided T shape. The proposed antenna consists of two-sidedTshape strip as compared to usual monopole patch antenna for minimizing the height of the antenna. The large space around the radiator is fully utilized as the ground is on the same plane as of radiator. Microstrip line feed is used to excite the proposed antenna placed on an FR4 substrate (dielectric constantεr=4.4). The antenna is practically fabricated and simulated. Simulated results of the proposed antenna have been obtained by using Ansoft High-Frequency Structure Simulator (HFSS) software. These results are compared with measured results by using network analyzer. Measured result shows good agreement with the simulated results. It is observed that the proposed antenna shows a wideband from 2.96 GHz to 7.95 GHz with three bands atf1=3.23 GHz,f2=4.93 GHz, andf3=7.04 GHz.

Sign in / Sign up

Export Citation Format

Share Document