scholarly journals The Effect of Desensitizing Toothpastes and Coffee Staining on the Optical Properties of Natural Teeth and Microhybrid Resin Composites: An In-Vitro Study

2018 ◽  
Vol 2018 ◽  
pp. 1-7
Author(s):  
Sedanur Turgut ◽  
Hamiyet Kılınç ◽  
Kıvanç Utku Ulusoy ◽  
Bora Bagis
Keyword(s):  
Color Change ◽  
Cetylpyridinium Chloride ◽  
Human Tooth ◽  
Staining Procedure ◽  
Control Group ◽  
Human Teeth ◽  
Color Changes ◽  
Stannous Fluoride ◽  
Color Measurements ◽  
Natural Teeth

Objective. To evaluate the effect of different desensitizing toothpastes and coffee staining on the discoloration rate of natural human tooth and composite materials. Materials and Methods. A total of 56 human teeth and 56 composite specimens were used. After initial color measurements were taken, specimens and teeth were exposed to simulated toothbrushing with six desensitizing toothpastes containing different active ingredients: stannous fluoride, strontium acetate, potassium citrate and hydroxyapatite, cetylpyridinium chloride, arginine, and novamin. Specimens were then exposed to coffee staining. Throughout the staining procedure, the storing solution was refreshed every day and the specimens were brushed with the tested toothpastes. Color measurements and changes were recorded at each stage and analyzed with one-way ANOVA, Dunnett tests, and paired sample t-test (p<0.05). Results. The largest color change was obtained with the stannous fluoride toothpaste after coffee staining for natural teeth (2.6 ΔE00⁎) and composite specimens (3.1 ΔE00⁎). Coffee staining resulted in significant changes for ΔE00⁎ values of all groups, except for natural teeth brushed with a novamin-based (p= 0.06) toothpaste. For composite specimens, only the stannous fluoride and cetylpyridinium chloride-based toothpastes resulted in significant color changes relative to the control group. ΔL⁎ and Δb⁎ values were also increased after staining for all groups (p<0.05). Conclusions. Desensitizing toothpastes alone did not cause perceptible color changes; however, in combination with coffee staining, it tended to increased discoloration for both composites and natural teeth.

Influence of Hydrogen Peroxide Bleaching Gels on Color, Opacity, and Fluorescence of Composite Resins

2012 ◽  
Vol 37 (5) ◽  
pp. 526-531 ◽  
Author(s):  
CRG Torres ◽  
CF Ribeiro ◽  
E Bresciani ◽  
AB Borges
Keyword(s):  
Hydrogen Peroxide ◽  
Composite Resin ◽  
Color Change ◽  
Composite Resins ◽  
Control Group ◽  
Peroxide Bleaching ◽  
Color Changes ◽  
Tukey Test ◽  
Bleaching Gels ◽  
Bleaching Treatment

SUMMARY The aim of the present study was to evaluate the effect of 20% and 35% hydrogen peroxide bleaching gels on the color, opacity, and fluorescence of composite resins. Seven composite resin brands were tested and 30 specimens, 3-mm in diameter and 2-mm thick, of each material were fabricated, for a total of 210 specimens. The specimens of each tested material were divided into three subgroups (n=10) according to the bleaching therapy tested: 20% hydrogen peroxide gel, 35% hydroxide peroxide gel, and the control group. The baseline color, opacity, and fluorescence were assessed by spectrophotometry. Four 30-minute bleaching gel applications, two hours in total, were performed. The control group did not receive bleaching treatment and was stored in deionized water. Final assessments were performed, and data were analyzed by two-way analysis of variance and Tukey tests (p&lt;0.05). Color changes were significant for different tested bleaching therapies (p&lt;0.0001), with the greatest color change observed for 35% hydrogen peroxide gel. No difference in opacity was detected for all analyzed parameters. Fluorescence changes were influenced by composite resin brand (p&lt;0.0001) and bleaching therapy (p=0.0016) used. No significant differences in fluorescence between different bleaching gel concentrations were detected by Tukey test. The greatest fluorescence alteration was detected on the brand Z350. It was concluded that 35% hydrogen peroxide bleaching gel generated the greatest color change among all evaluated materials. No statistical opacity changes were detected for all tested variables, and significant fluorescence changes were dependent on the material and bleaching therapy, regardless of the gel concentration.

scholarly journals Analysis of the Influence of Food Colorings in Esthetic Orthodontic Elastomeric Ligatures

2016 ◽  
Vol 10 (1) ◽  
pp. 516-521 ◽  
Author(s):  
Vanessa Dias da Silva ◽  
Eduardo Martinelli S de Lima ◽  
Caroline Dias ◽  
Leandro Berni Osório
Keyword(s):  
Color Change ◽  
Black Tea ◽  
Control Group ◽  
Distilled Water ◽  
Water Control ◽  
Color Changes ◽  
Influence Of Food

Proposition: The purpose of this study was to evaluate in vitro the color changes of esthetic orthodontic elastomeric ligatures of different shades when exposed to four food colorings commonly found in the diet of patients. Materials and Methods: The sample consisted of esthetic orthodontic elastomeric ligatures in the colors pearl, pearl blue, pearl white and colorless, which were immersed for 72 hours in five different solutions: distilled water (control group), coffee, tea, Coca-Cola ® and wine. The color changes of the esthetic orthodontic elastomeric ligatures were measured with the aid of a spectrophotometer, at T1 - as provided by the manufacturer; and T2 - after colorings process. Results: The results indicated that the esthetic orthodontic elastomeric ligatures of all initial hues are susceptible to pigmentation. Among the evaluated colors, all changed the finished look and the color of the samples tested. In ascending order, the color of the samples was as follows: distilled water, Coca-Cola®, black tea, wine and coffee. Conclusion: The substances that have a greater potential for pigmentation in esthetic orthodontic elastomeric ligatures were black tea, wine and coffee, respectively. All shades of esthetic orthodontic elastomeric ligatures are susceptible to color change.

scholarly journals Evaluation of color change in acrylic and bisacrylic resin resins in different solutions

2018 ◽  
Vol 5 (4) ◽  
pp. 76
Author(s):  
Mone Laiz Bortoli ◽  
Cristina Von Appen ◽  
Camila Longoni ◽  
Carmen Beatriz Borges Fortes ◽  
Jefferson Tomio Sanada
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Acrylic Resin ◽  
Color Variation ◽  
Color Reading ◽  
Control Group ◽  
Color Changes ◽  
Significant Difference ◽  
Prosthesis Material ◽  
Chlorhexidine Solution

Aim: This work aimed to evaluate the color stability of an acrylic resin chemically activated (ARCA) using different handling techniques, and a bisacrylic resin when exposed to different pigmentation solutions.Material and Methods: Silicon matrixes were confectioned (10x10x3mm) to be used as specimens. The groups were designed as follows: Group Pot, Group Brush, Group Manufacturer and Group Bisacrylic (n=18). Each group was exposed to three different pigmentation solutions: distilled water, coke and chlorhexidine digluconate 0.12%. Three readings were performed for each specimen using a spectrophotometer, and the evaluations were carried out in three different time. After the color reading, three averages and the standard deviation of variation were performed after 24 hours (T1), 7 days (T2) and 14 days (T3). Data were submitted to the ANOVA and 2 criteria and Tukey (P<0.05) in the statistical software SSPS 18 for Macintosh (SPSS Inc., Chicago, USA).Results: When compared the solutions in each group of material, there was no statistically significant difference, except for T3, where the group Dencor Brush and Bisacrylic demonstrated higher color variation in all the solutions, even in the control group, and the values in Chlorhexidine higher than the other, showing greater instability after 14 days.Conclusions: With the results, bisacrylic resin used as provisory prosthesis material presents greater color instability than the ARCA, when submitted to different solutions. Bisacrylic resin and Dencor Brush present significantly visible color changes in chlorhexidine solution after 14 days. All the materials in coke solution present homogeneity in the color change after 7 days exposition to the solution, with no visible color change.

scholarly journals Comparative SEM evaluation of penetration of adhesive systems in human dentin with a non-rinse conditioner and a self-etching primer

2004 ◽  
Vol 15 (1) ◽  
pp. 19-25 ◽  
Author(s):  
Julio Orrico de Aragão Pedra e Cal-Neto ◽  
Mauro Sayão de Miranda ◽  
Katia Regina Hostílio Cervantes Dias
Keyword(s):  
Penetration Depth ◽  
Third Molar ◽  
Adhesive System ◽  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Human Tooth ◽  
Control Group ◽  
Human Teeth ◽  
Homogeneous Groups

The purpose of this study was to compare the effect of a self-etching primer and a non-rinse conditioner with the effect of a conventional adhesive system on the penetration depth in dentin of human teeth, using scanning electronic microscopy (SEM). Fifteen human third molar teeth were sectioned into 2 pieces. All pieces were flattened with grade 600 to 1200 silicon carbide paper and divided into 6 groups: group 1 - Prime & Bond NT (NT), negative control; group 2 - 37% phosphoric acid + Prime & Bond NT (PANT), positive control; group 3 - Non-rinse Conditioner (NRC) + Prime & Bond NT (NRCNT); group 4 - NRC + Prime & Bond 2.1 (NRCPB); group 5 - NRC + Scotchbond MP (NRCSB); group 6 - Prompt L-Pop (PLP). All teeth were covered with Dyract AP. The tooth fragments were decalcified, and its resin replicas were evaluated by SEM by three previously standardized examiners. The penetration was scored from 0 (no penetration) to 3 (maximum penetration). The Kruskal-Wallis and Mann-Whitney U tests (p<0.05) showed three statistically homogeneous groups: {NT, NRCPB, NRCSB and PLP}, {NRCNT} and {PANT}. The authors concluded that the self-etching primer and the non-rinse conditioner provide a lower penetration depth in human tooth dentin than the conventional adhesive system.

scholarly journals Effect of In-Office Bleaching on Color and Surface Roughness of Composite Restoratives

2010 ◽  
Vol 04 (02) ◽  
pp. 118-127 ◽  
Author(s):  
Randa Hafez ◽  
Doa Ahmed ◽  
Mai Yousry ◽  
Wafa El-Badrawy ◽  
Omar El-Mowafy
Keyword(s):  
Surface Roughness ◽  
Surface Texture ◽  
Color Change ◽  
Distilled Water ◽  
Bleaching Agent ◽  
Color Changes ◽  
Before And After ◽  
Colorimetric Measurements ◽  
Natural Teeth ◽  
Environmental Sem

Objectives: The purpose of this study was to determine color changes and surface roughness of composites when they were subjected to in-office bleaching.Methods: 12 discs 15 mm in diameter and 2 mm thick were prepared from two shades (A2 & A4) of two composites, Durafil VS (DF) and TPH3 (TPH). Specimens were polished and stored in distilled water for 24 hours at 37°C before being subjected to bleaching, staining, and re-bleaching. Each of the groups of specimens (DF-A2, DF-A4, TPH-A2 and TPH-A4) were subdivided into three subgroups (n=4) and bleached with Beyond, LumaWhite-Plus, and Opalescence-Boost. Specimens were then stained by immersing them in a coffee solution for 48 hours at 37°C, and then they were re-bleached. Colorimetric measurements were performed at baseline, after bleaching, after staining, and after rebleaching. Surface roughness was determined with environmental SEM before and after bleaching. Data were statistically-analyzed.Results: None of the bleaching systems notably changed the color of composites (delta-E<2). Coffee staining affected DF specimens more than TPH. Stained specimens showed variable responses to whitening with no significant color change observed with TPH (delta-E<2) and significant changes observed with DF. Surface roughness significantly changed with bleaching, but the degree varied according to composite shade and bleaching agent.Conclusions: Three in-office bleaching agents had no significant color changes on two composites. DF showed more color change than TPH when immersed in coffee. Stained composites showed different degrees of whitening, with DF showing more response. Bleaching may adversely affect the surface texture of composites. Dentists should take into consideration that composite restorations may not respond to bleaching in the same way that natural teeth do. (Eur J Dent 2010;4:118-127)

scholarly journals Repeatability in Color Measurements of a Spectrophotometer using Different Positioning Devices

2015 ◽  
Vol 16 (12) ◽  
pp. 933-938 ◽  
Author(s):  
So Ran Kwon ◽  
Fang Qian ◽  
Michael Hemming
Keyword(s):  
Color Change ◽  
Measuring Method ◽  
Rank Test ◽  
Human Teeth ◽  
Measuring Methods ◽  
Color Measurements ◽  
Signed Rank ◽  
Significant Difference ◽  
Signed Rank Test ◽  
Positioning Devices

ABSTRACT Aim This study aimed to evaluate the repeatability of color measurements of an intraoral spectrophotometer with the use of three different methods by two operators. Materials and methods A total of 60 teeth were obtained, comprising 30 human maxillary teeth [central incisors (n = 10); canines (n = 10); molars (n = 10)] and 30 artificial teeth [lateral incisors (n = 10); premolar (n = 20)]. Multiple repeated color measurements were obtained from each tooth using three measuring methods by each of the two operators. Five typodonts with alternating artificial and human teeth were made. Measurements were taken by two operators with the Vita EasyShade spectrophotometer using the custom tray (CT), custom jig (CJ) and free hand (FH) method, twice, at an interval of 2 to 7 days. Friedman test was used to detect difference among the three color measuring methods. Post hoc Wilcoxon signed-rank test with Bonferroni correction applied was used for pair-wise comparison of color measurements among the three methods. Additionally, a paired-sample t-test was used to assess a significant difference between the two duplicated measurements made on the same tooth by the same operator for each color parameter and measuring method. Results For operator A, mean (SD) overall color change-ΔE* (SD) perceived for FH, CT and CJ were 2.21(2.00), 2.39 (1.58) and 2.86 (1.92), respectively. There was statistically significant difference in perceived ΔE* in FH vs CJ (p = 0.0107). However, there were no significant differences between FH and CT (p = 0.2829) or between CT and CJ (p = 0.1159). For operator mean ΔE* (SD) for FH, CT and CJ were 3.24 (3.46), 1.95 (1.19) and 2.45 (1.56), respectively. There was a significant difference between FH and CT (p = 0.0031). However, there were no statistically significant differences in ΔE* in FH vs CJ (p = 0.3696) or CT vs CJ (p = 0.0809). Conclusion The repeatability of color measurements was different among the three measuring methods by operators. Overall, the CT method worked well for both operators. Clinical significance The use of a custom tray with apertures can improve the repeatability of color measurements of an intraoral spectrophotometer. How to cite this article Hemming M, Kwon SR, Qian F. Repeatability in Color Measurements of a Spectrophotometer using Different Positioning Devices. J Contemp Dent Pract 2015;16(12):933-938.

scholarly journals 621 Effects of Shading Levels on Seasonal Leaf Color in Fire Power Nandina

HortScience ◽  
1999 ◽  
Vol 34 (3) ◽  
pp. 554E-554
Author(s):  
Leiah M. Butler ◽  
William F. Hayslett ◽  
Robert Harrison
Keyword(s):  
New Zealand ◽  
Color Change ◽  
Control Group ◽  
Leaf Color ◽  
Color Changes ◽  
Two Factors ◽  
In Fire ◽  
To Receive ◽  
Ornamental Shrub ◽  
Deep Green

A 24-month experiment was conducted to study the effects of shading levels on the foliage color changes in Fire Power Nandinas. This popular ornamental shrub is the dwarf form of the Heavenly Bamboo, Nandina domestica. It originated in New Zealand, and has vivid green leaf color in the spring and summer months that changes to a fluorescent red as winter approaches. In this experiment light was limited by covering the plots with black woven shadecloth of 43% and 78% shade, while allowing the control plots to receive full sunlight. Fifteen shrubs from each plot were randomly selected and 10 leaves per plant in each treatment were taken at 28-day intervals. The leaf color was recorded using a camera attached to a microscope. The results from this study indicate that changes in leaf color may be affected by the change of the seasons. The level of light/shade that the plants receive may also affect leaf color. The control group turned a bright fluorescent red, the 43% shade turned a deep red, and the 78% shade remained a deep green with few leaves turning red. Based on the different hues observed, this research indicates that limiting light has a direct effect on leaf color in this species. The correlation between the amount of sunlight received and the season of the year are the two factors that determine the degree of color change in this ornamental shrub.

scholarly journals Evaluation of staining and color changes of a resin infiltration system

2016 ◽  
Vol 86 (6) ◽  
pp. 900-904 ◽  
Author(s):  
Andrew Leland ◽  
Sercan Akyalcin ◽  
Jeryl D. English ◽  
Eser Tufekci ◽  
Rade Paravina
Keyword(s):  
Red Wine ◽  
Color Change ◽  
Accelerated Aging ◽  
Color Difference ◽  
Human Teeth ◽  
Point Pair ◽  
Resin Infiltration ◽  
Color Changes ◽  
The Right ◽  
Time Point

ABSTRACT Objective: To analyze the staining and color changes of a resin infiltrant system used for management of white spot lesions (WSLs). Materials and Methods: WSLs were artificially created on left buccal halves of 48 extracted human teeth. These sites were then treated with resin infiltration (RI) while the right halves of the teeth remained as nonresin (NRI) areas. Six groups were formed (n = 8 teeth/group) and were exposed to the following: red wine, coffee, orange juice, combined staining agents, accelerated aging, and distilled water for 1 week. The teeth were then polished with a prophy cup and polishing paste. Color properties were assessed using a spectrophotometer at baseline (T0), after each exposure (T1), and after polishing (T2). Color difference (ΔE*) was calculated between each time point for both halves of the teeth (RI and NRI). Data were analyzed with a two-way analysis of variance with presence of resin infiltration and staining agents as the main effects for each time point pair. Multiple comparisons were made with a Bonferroni post hoc test. The level of significance was set at P &lt; .05. Results: The red wine and combined staining agent groups caused the greatest color change between all intervals (P &lt; .05). Significant interactions were recorded between resin infiltration application and staining agents at all time periods (P &lt; .05). The presence of resin infiltration as a main effect did not affect color change between T0 and T2 (P &gt; .05). Conclusions: RI areas showed higher staining susceptibility than did NRI areas. However, prophylaxis had a strong effect on reversing the discoloration of both RI and NRI areas.

scholarly journals Comparative evaluation of the color stability of universal composites

2021 ◽  
Vol 11 (Suppl. 1) ◽  
pp. 234-237
Author(s):  
Merve Gürses ◽  
Nevin Çobanoğlu ◽  
Omar Faez Abdulateef
Keyword(s):  
Comparative Evaluation ◽  
Color Change ◽  
Native Speakers ◽  
Color Stability ◽  
Composite Resins ◽  
Control Group ◽  
Distilled Water ◽  
Color Changes ◽  
Before And After ◽  
Native Speakers Of English

Aim: The aim of this study is to compare the color stability of different universal composites and to evaluate the effects of keeping them in water for 1 week before coloring. Methodology: Filtek Ultimate (FU), Estelite Ʃ Quick (EQ), and Ceram X One (CX) composites were used. The specimens were kept in the dark, dry environment for 24 hours, then polished, and each composite group was divided into 3 groups: the control, the group that was kept in water for 1 week before coloring and coloring (n=7). The samples in the control group were kept in distilled water for 3 weeks. Samples in the coloring group were colored with coffee for 2 weeks (C), and the samples in the last group were kept in water for 1 week and then stained with coffee for 2 weeks (W+C) (n=7). Color measurements for all samples were taken twice, once before and once after the coloring period. The color changes of the samples were measured using the ∆E* parameter, which was calculated with before and after measurements.  Results: For all composite resins, the ΔE values of the samples in the W+C and C groups were significantly higher than those in the control group. When the composites were compared with each other, the differences between the ΔE values of the composites in the control, W+C, and C groups were not statistically significant. For FU and ESQ, at the end of the coloration period, there were no statistically significant differences between the W+C and C groups. However, for CX, the color change of the samples in the W+C group was significantly higher than that in  the C group. Conclusion: Storage in distilled water for 1 week before staining did not reduce the color change values of the samples. Thus, after composite restorations are performed, there is no need to advise patients to avoid staining foods, especially in the first week after restoration.   How to cite this article: Abdulateef OF, Çobanoğlu N, Gürses M. Comparative evaluation of the color stability of universal composites. Int Dent Res 2021;11(Suppl.1):234-7. https://doi.org/10.5577/intdentres.2021.vol11.suppl1.34   Linguistic Revision: The English in this manuscript has been checked by at least two professional editors, both native speakers of English.

scholarly journals The Effects of Coffee and Energy Drink on Color Stability of Hybrid Ceramics

2021 ◽  
Author(s):  
Işıl Sarıkaya ◽  
Hande Dilli
Keyword(s):  
Color Change ◽  
Color Stability ◽  
Color Difference ◽  
Ceramic Materials ◽  
Energy Drink ◽  
Control Group ◽  
Distilled Water ◽  
Color Measurements ◽  
Difference Formula ◽  
Significant Difference

Purpose: The aim of this study was to compare the color stability of two different hybrid ceramic materials. Materials & Methods: Using the precision cutting device (Micracut, Metcon, Turkey), 36 specimens (12 x 15 x 1 mm) were obtained from Vita Enamic (Vita Zahnfabrik, Germany) and Lava Ultimate (3M ESPE, St.Paul, USA) CAD / CAM blocks. After finishing procedures were completed, all specimens were stored in distilled water for 24 h. Then, the specimens were dried and the initial color measurements were made. L, a, b values were determined using a spectrophotometer (Vita Easy Shade, Vita Zahnfabrik, Germany). The specimens were then divided into 3 test groups and stored in coffee (Nescafe Classic, Turkey) (G2, G5), energy drink (Red Bull, Austria) (G3, G6), and in the distilled water as the control group (G1, G4), for 48 h. After 48 h, the specimens were washed with distilled water and dried. Second color measurements were made. ∆E00 values were calculated using the CIEDE 2000 color-difference formula. Results: Data were analyzed by two-way ANOVA. Multiple comparisons were made with Bonferroni’s test. There was a statistically significant difference between 2 ceramics (p=0.035). Generally, Lava Ultimate showed more color change than Vita Enamic. Among the beverages, coffee was significantly different for both ceramics than control and energy drink (p<0.05). Conclusion: Lava Ultimate, showed more color change than Vita Enamic. Coffee has also been determined as the most colorant drink for both hybrid ceramics.

Sign in / Sign up

Export Citation Format

Share Document