scholarly journals Development of driving cycle under real world traffic conditions: A case study

2019 ◽  
Vol 9 (6) ◽  
pp. 4798
Author(s):  
Geetha A. ◽  
Subramani C.
Keyword(s):  
Driving Cycle ◽  
Time Dependent ◽  
Maximum Speed ◽  
Time Data ◽  
Maximum Acceleration ◽  
The Road ◽  
Traffic Conditions ◽  
Condensed Form ◽  
On The Road

<p><span>The modeling of a car is essentially done by taking into consideration the driving terrain, traffic conditions, driver’s behavior and various other factors which may directly or indirectly affect the vehicle’s performance. A vehicle is modeled for given specifications and constraints like maximum speed, maximum acceleration, and braking time, appropriate suspension for the gradient of the road and fuel consumption. Henceforth, a profound study and analysis of different drive cycles are essential. A time dependent drive cycle is a condensed form of data that helps us to determine the time taken to conduct the driving test on the road. This article highlights the development of a real driving cycle in the area of Tamilnadu, India. On-road vehicle’s speeds versus time data were obtained along the selected route. The data obtained were analyzed first and then a new driving cycle was developed.</span></p>

CASA: An Alternative Smartphone-Based ADAS

2021 ◽  
pp. 1-41
Author(s):  
Manolo Dulva Hina ◽  
Hongyu Guan ◽  
Assia Soukane ◽  
Amar Ramdane-Cherif
Keyword(s):  
Low Cost ◽  
Electronic System ◽  
Time Data ◽  
Case Scenario ◽  
Safe Driving ◽  
The Road ◽  
Driving Assistance ◽  
Alternative Means ◽  
On The Road ◽  
Driving Assistance System

Advanced driving assistance system (ADAS) is an electronic system that helps the driver navigate roads safely. A typical ADAS, however, is suited to specific brands of vehicle and, due to proprietary restrictions, has non-extendable features. Project CASA is an alternative, low-cost generic ADAS. It is an app deployable on smartphone or tablet. The real-time data needed by the app to make sense of its environment are stored in the vehicle or on the cloud, and are accessible as web services. They are used to determine the current driving context, and, if needed, decide actions to prevent an accident or keep road navigation safe. Project CASA is an undertaking of a consortium of industrial and academic partners. A use case scenario is tested in the laboratory (virtual) and on the road (actual) to validate the appropriateness of CASA. It is a contribution to safe driving. CASA’s contribution also lies in its approach in the semantic modeling of the context of the environment, the vehicle and the driver, and on the modeling of rules for fusion of data and fission process yielding an action to be implemented. In addition, CASA proposes a secured means of transmitting data using light, via light fidelity (LiFi), itself an alternative means of wireless vehicle–smartphone communication.

scholarly journals Improving V2X-6G network capacity using a new UAV-based approach in a Cloud/ICN architecture, case Study: VANET network

2021 ◽  
Vol 297 ◽  
pp. 01019
Author(s):  
Abdeslam Houari ◽  
Tomader Mazri
Keyword(s):  
Mobile Networks ◽  
Network Capacity ◽  
Intelligent Environment ◽  
New Approach ◽  
The Road ◽  
Road Users ◽  
Aerial Vehicle ◽  
On The Road

6G of mobile networks plays a crucial role in improving the capacity and enhancing the quality of services of Vehicle-to-Everything (V2X) based networks evolving in an intelligent environment. VANET is a promising project in the intelligent transportation field using V2X communications. The emergence of several 5G and 6G technologies has raised several challenges for scientists and researchers to allow vehicles and road users to enjoy several services while ensuring their safety on the road. Among these technologies, the unmanned aerial vehicle (UAV), which can perform different tasks for road users and vehicle drivers such as data caching, packet relaying and processing. In this article, we present a new approach based on 6G Unmanned Aerial Vehicles (UAV) technology on a vehicular cloud architecture while exploiting the exchange support of information-centric networking (ICN) for the improvement of network capacity.

The Integrative Time-Dependent Modeling of the Reliability and Failure of the Causes of Drivers' Error Leading to Road Accidents

2015 ◽  
pp. 1279-1294
Author(s):  
Khashayar Hojjati-Emami ◽  
Balbir S. Dhillon ◽  
Kouroush Jenab
Keyword(s):  
Human Error ◽  
Time Dependent ◽  
Failure Rates ◽  
Road Accidents ◽  
Road Transportation ◽  
The Road ◽  
Representational Model ◽  
On The Road ◽  
The Moment ◽  
Dependent Failure

Nowadays, the human error is usually identified as the conclusive cause of investigations in road accidents. The human although is the person in control of vehicle until the moment of crash but it has to be understood that the human is under continued impact by various factors including road environment, vehicle and human's state, abilities and conduct. The current advances in design of vehicle and roads have been intended to provide drivers with extra comfort with less physical and mental efforts, whereas the fatigue imposed on driver is just being transformed from over-load fatigue to under-load fatigue and boredom. A representational model to illustrate the relationships between design and condition of vehicle and road as well as driver's condition and state on fatigue and the human error leading to accidents has been developed. Thereafter, the stochastic mathematical models based on time-dependent failure rates were developed to make prediction on the road transportation reliability and failure probabilities due to each cause (vehicle, road environment, human due to fatigue, and human due to non fatigue factors). Furthermore, the supportive assessment methodology and models to assess and predict the failure rates of driver due to each category of causes were developed and proposed.

What Role Place and Localness in the Design of Sustainable Buildings?

2008 ◽  
Vol 3 (2) ◽  
pp. 20-25
Author(s):  
Dick Clarke
Keyword(s):  
Cultural Context ◽  
Building Design ◽  
Domestic Architecture ◽  
Culturally Appropriate ◽  
Joint Paper ◽  
Sustainable Buildings ◽  
The Road ◽  
On The Road

Is “the new modernism” in domestic architecture—sometimes called “internationalism”—a useful step on the road toward sustainable buildings? Mindless recreations of traditional forms from other times and places are no better, as many writers have noted, but any building's natural and cultural context must play a fundamental role in the design, materials selection, and even the detailing, if sustainability is to be more readily achieved. The role of place-based planning has been well researched and reported (Clarke 2006; Mant 1998, 2000; NSW Department of Urban Affairs and Planning 2001). Less well understood is the role of “localness” in building design. This informs the overall form of buildings, and their detailing, as well as their technical functionality. A local understanding stems from a sense of materials, climate, and indigenous or local culture, and informs the design process at every level. In this article, the position of internationalist domestic architecture (espoused in glossy architecture publications) is criticised, drawing also on previous research (a case study of the outcomes of a place-based planning instrument, by the author, and a joint paper on locality-based design written jointly with Trevor King). The internationalist design approach is shown not to provide culturally appropriate or technically sustainable buildings.

Determining Passenger Car Equivalent for Motorcycle at Mid-Block of Sesetan Road

2015 ◽  
Vol 776 ◽  
pp. 95-100
Author(s):  
I. Gusti Raka Purbanto
Keyword(s):  
Motor Vehicles ◽  
Heavy Vehicles ◽  
Highway Capacity ◽  
Passenger Car ◽  
Highway Capacity Manual ◽  
The Road ◽  
Traffic Conditions ◽  
Mode Share ◽  
Passenger Car Equivalent ◽  
On The Road

Motorcycle dominates traffic in Bali, particularly in urban roads, which occupy more than 85% of mode share. The three types of vehicles, i.e. motorcycles, heavy and light vehicles share the roadways together. Under mixed traffic conditions, motorcycle may be travelling in between and alongside two consecutive motor vehicles. Considering such a situation, passenger car equivalent values should be examined thoroughly. This study aims to determine passenger car equivalent (PCEs) of motorcycle at mid-block of Sesetan Road. Three approaches are used to examine the PCEs values. This study found that the PCE of motorcycles are in a range between 0.2 and 0.4. This values are about the same to the existing PCE of the Indonesian Highway Capacity Manual (1997). This study also pointed out that motorcyclists and car drivers may behave differently to the existence of motorcycles. Car drivers are more aware than motorcyclists on the existence of motorcycle on the road. Further, more samples are required to obtain comprehensive results. In addition, the presence of heavy vehicles need to be considered for future study.

"On the Road to Cambridge": A Case Study of Faculty and Student Affairs in Collaboration

2003 ◽  
Vol 74 (1) ◽  
pp. 77-95 ◽  
Author(s):  
Jeff L. Philpott ◽  
Carney Strange
Keyword(s):  
Student Affairs ◽  
The Road ◽  
On The Road

scholarly journals Understanding Air Pollution from Induced Traffic during and after the Construction of a New Highway: Case Study of Highway 25 in Montreal

2017 ◽  
Vol 2017 ◽  
pp. 1-14 ◽  
Author(s):  
Md. Shohel Reza Amin ◽  
Umma Tamima ◽  
Luis Amador Jimenez
Keyword(s):  
Air Pollution ◽  
Metropolitan Area ◽  
Road Network ◽  
Traffic Density ◽  
Air Contaminants ◽  
Construction Period ◽  
Close Vicinity ◽  
The Road ◽  
On The Road

This study demonstrates through a case study that detailed analyses, even after the construction of a project, are feasible using current technologies and available data. A case study of highway 25 is used to illustrate the method and verify the levels of air contaminants from additionally induced traffic during and after the construction of highway. Natural traffic growth was removed from the effect of observed gas emissions by comparing observed levels on other further locations in the same metropolitan area. This study estimates air pollution from the additional traffic during and after the construction of A-25 extension project. NO2 levels were spatially interpolated during peak and off-peak hour traffic and traffic density simulated on the road network for four scenarios. Comparing the four scenarios, it was found that levels of NO2 concentrations were reduced at neighbor areas due to less traffic during the construction period. Levels of NO2 after the construction were higher than those in 2008. The simulated traffic density for four scenarios revealed that traffic density was significantly increased on both arterial and access roads within the close vicinity of the extension project during and after its construction.

Sign in / Sign up

Export Citation Format

Share Document