Comparative Study of Low Sidelobe Time Modulated Linear Arrays with Different Time Schemes

2004 ◽  
Vol 18 (11) ◽  
pp. 1443-1458 ◽  
Author(s):  
S. Yang ◽  
Y. B. Gan ◽  
P. K. Tan
2009 ◽  
Vol 57 (5) ◽  
pp. 1584-1586 ◽  
Author(s):  
M. Alvarez-Folgueiras ◽  
J. A. Rodriguez-Gonzalez ◽  
F. Ares-Pena
Keyword(s):  
Low Loss ◽  

Author(s):  
Noor Ainniesafina Zainal ◽  
Muhammad Ramlee Kamarudin ◽  
Yoshihide Yamada ◽  
Norhudah Seman

<p>For next generation of 5G mobile base station antennas, multibeam, multifrequency and low sidelobe characteristics requested. Simplify the feeding network will contribute a low feeder loss and frequency dependent. From the previous research by the author, low sidelobe level reported by density tapered array configuration from -13 dB to -16 dB and the result maintained for wideband operation frequency at 28 GHz, 42 GHz, and 56 GHz. However, the grating lobe has occurred due to element spacing larger than a wavelength of higher frequency (56 GHz). In this paper, an investigation was made of the performance of radiation pattern for unequally microstrip linear array antenna in frequency 42 GHz and 56 GHz by loading parasitic elements. The effect of parasitic element to the impedance, gain, and sidelobe level of unequally microstrip linear spaced tapered array also examined. The design has been simulated using Ansoft High Frequency Structural Simulator (HFSS) ver 16.0.</p>


2018 ◽  
Vol 2018 ◽  
pp. 1-7 ◽  
Author(s):  
Xin-Kuan Wang ◽  
Gui-Bao Wang

A hybrid method that combines the iterative Fourier transform (IFT) and the algorithm of differential evolution (DE) is proposed to address the synthesis of low sidelobe sparse linear array (SLA) including many elements. Firstly, a thinned linear array (TLA) with the lattices spaced at half wavelength is obtained by the IFT. Then, for the elements of the TLA whose left or right spacing are greater than half wavelength, their placements are selected as the candidates which will be further optimized by the DE, as long as the interelement spacing is not less than half wavelength. Consequently, the convergence pressure of DE is greatly alleviated for the reason that the selected elements only accounts for a small part of the total. Therefore, the SLA with improved sidelobe performance can be obtained at relative low hardware cost. Several numerical instances confirmed the effectiveness of the proposed method.


Sign in / Sign up

Export Citation Format

Share Document