Design and optimization of a modified series hybrid electric vehicle powertrain

2018 ◽  
Vol 233 (6) ◽  
pp. 1419-1435 ◽  
Author(s):  
Swagata Borthakur ◽  
Shankar C Subramanian
Keyword(s):  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Combustion Engine ◽  
Operating Efficiency ◽  
Traction Motor ◽  
Vehicle Performance ◽  
Series Hybrid Electric Vehicle ◽  
Hybrid Electric ◽  
Vehicle Powertrain

Hybrid electric vehicles are emerging technologies that are considered as eco-friendly alternative solutions to internal combustion engine–driven vehicles. This paper proposes a modified hybrid electric vehicle powertrain system that addresses the shortcomings of a series hybrid electric vehicle powertrain. The proposed configuration replaces the conventional generator of a series hybrid electric vehicle with an integrated starter generator that supports the traction motor of the vehicle during acceleration and peak torque requirements and maintains the state of charge of the batteries to provide an extended electric range of the vehicle. The work done in this paper can be categorized into two stages. The first stage is the methodical development of the powertrain in terms of initial parameter matching and sizing of the vehicle components by considering the fundamentals of longitudinal vehicle dynamics. The second stage describes the optimization of the proposed configuration to meet the design objective of maximizing fuel economy subjected to a set of vehicle performance constraints. The performance of the proposed powertrain was evaluated and compared with a series hybrid electric vehicle powertrain for an on-road Indian driving cycle using AVL CRUISE, which is a commercially available software for the study and analysis of road vehicle powertrains. Result analysis during initial parameterization showed a reduction in gross vehicle weight of the proposed configuration by 244 kg (1.5%) and an improvement in the average operating efficiency of the traction motor by around 11%, when compared to a series hybrid electric vehicle. Furthermore, the optimization results for the proposed configuration established an improvement in the fuel economy by 21% while meeting vehicle performance requirements.

scholarly journals Real-Time Co-optimization of Vehicle Route and Speed Using Generic Algorithm for Improved Fuel Economy

2019 ◽  
Vol 141 (03) ◽  
pp. S08-S15
Author(s):  
Guoming G. Zhu ◽  
Chengsheng Miao
Keyword(s):  
Electric Vehicle ◽  
Electric Vehicles ◽  
Fuel Economy ◽  
Autonomous Vehicles ◽  
Hybrid Electric Vehicle ◽  
High Efficiency ◽  
Combustion Engine ◽  
Cruise Control ◽  
Vehicle Performance ◽  
Hybrid Electric

Making future vehicles intelligent with improved fuel economy and satisfactory emissions are the main drivers for current vehicle research and development. The connected and autonomous vehicles still need years or decades to be widely used in practice. However, some advanced technologies have been developed and deployed for the conventional vehicles to improve the vehicle performance and safety, such as adaptive cruise control (ACC), automatic parking, automatic lane keeping, active safety, super cruise, and so on. On the other hand, the vehicle propulsion system technologies, such as clean and high efficiency combustion, hybrid electric vehicle (HEV), and electric vehicle, are continuously advancing to improve fuel economy with satisfactory emissions for traditional internal combustion engine powered and hybrid electric vehicles or to increase cruise range for electric vehicles.

scholarly journals Multiobjective optimisation of a series hybrid electric vehicle using DIRECT algorithm

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Abdelmoula Rihab ◽  
◽  
Ben Hadj Naourez ◽  
Chaieb Mohamed ◽  
Neji Rafik ◽  
...  
Keyword(s):  
Fuel Consumption ◽  
Electric Vehicle ◽  
Hybrid Electric Vehicle ◽  
Combustion Engine ◽  
Vehicle Performance ◽  
Performance Requirements ◽  
Toxic Emissions ◽  
Series Hybrid Electric Vehicle ◽  
Hybrid Electric ◽  
Fuel Consumption And Emissions

With the economic development, transportation in the city becomes more crowded. Furthermore, fuel consumption is causing a serious problem of pollution in the urban environment. Hybrid electric vehicles are considered as a good solution compared to conventional internal combustion engine vehicles. In order to solve those problems, the components parameters of a series hybrid electric vehicle are selected and tested with the ADvanced VehIcle SimulatOR (ADVISOR) simulation tool, which is a software-based on Matlab_simulink. Then, an optimisation was done to minimise simultaneous fuel consumption and emissions (HC, CO, and NOx) of the vehicle engine. In addition, the driving performance requirements are also examined during the urban dynamometer driving schedule (UDDS) to fix their optimal control parameters. Finally, the results show that those steps help reduce fuel consumption and emissions while guaranteeing vehicle performance. Hence, the series hybrid electric vehicle greatly improves fuel economy and reduces toxic emissions.

Match and Optimization of Series Hybrid Bus Powertrain Parameters

2011 ◽  
Vol 121-126 ◽  
pp. 2710-2714
Author(s):  
Ling Cai ◽  
Xin Zhang
Keyword(s):  
Electric Vehicle ◽  
Fuel Economy ◽  
Hybrid Electric Vehicle ◽  
Simulation Platform ◽  
Optimal Method ◽  
Orthogonal Method ◽  
Series Hybrid Electric Vehicle ◽  
Hybrid Bus ◽  
Promising Solution ◽  
Hybrid Electric

With the requirements for reducing emissions and improving fuel economy, it has been recognized that the electric, hybrid electric powered drive train technologies are the most promising solution to the problem of land transportation in the future. In this paper, the parameters of series hybrid electric vehicle (SHEV), including engine-motor, battery and transmission, are calculated and matched. Advisor software is chosen as the simulation platform, and the major four parameters are optimized in orthogonal method. The results show that the optimal method and the parameters can improve the fuel economy greatly.

Exergo-technological explicit methodology for gas-turbine system optimization of series hybrid electric vehicles

2017 ◽  
Vol 232 (10) ◽  
pp. 1323-1338 ◽  
Author(s):  
Wissam S Bou Nader ◽  
Charbel J Mansour ◽  
Maroun G Nemer ◽  
Olivier M Guezet
Keyword(s):  
Gas Turbine ◽  
Fuel Consumption ◽  
Electric Vehicle ◽  
Hybrid Electric Vehicle ◽  
Combustion Engine ◽  
Energy Management Strategy ◽  
Auxiliary Power Unit ◽  
Auxiliary Power ◽  
Series Hybrid Electric Vehicle ◽  
Hybrid Electric

Significant research efforts have been invested in the automotive industry on hybrid electrified powertrains in order to reduce the dependence of passenger cars on oil. Electrification of powertrains resulted in a wide range of hybrid vehicle architectures. The fuel consumption of these powertrains strongly relies on the energy converter performance, as well as on the energy management strategy deployed on board. This paper investigates the potential of fuel consumption savings of a series hybrid electric vehicle using a gas turbine as an energy converter instead of the conventional internal-combustion engine. An exergo-technological explicit analysis is conducted to identify the best configuration of the gas-turbine system. An intercooled regenerative reheat cycle is prioritized, offering higher efficiency and higher power density than those of other investigated gas-turbine systems. A series hybrid electric vehicle model is developed and powertrain components are sized by considering the vehicle performance criteria. Energy consumption simulations are performed over the Worldwide Harmonized Light Vehicles Test Procedure driving cycle using dynamic programming as the global optimal energy management strategy. A sensitivity analysis is also carried out in order to evaluate the impact of the battery size on the fuel consumption, for self-sustaining and plug-in series hybrid electric vehicle configurations. The results show an improvement in the fuel consumption of 22–25% with the gas turbine as the auxiliary power unit in comparison with that of the internal-combustion engine. Consequently, the studied auxiliary power unit for the gas turbine presents a potential for implementation on series hybrid electric vehicles.

Sign in / Sign up

Export Citation Format

Share Document