Occupational exposure to natural radioactivity in some factories in Suez City

2015 ◽  
Vol 26 (4) ◽  
pp. 567-575
Author(s):  
H. A. Abdel Ghany ◽  
A. El-Shershaby ◽  
A. Sroor ◽  
M. Abdel-Samei

This work presents the results of the absorbed dose rates and estimated effective doses of the surface soils samples collected from different factories in the industrial region of Suez City, Egypt using high resolution gamma spectrometry system (HpGe) detector. The average activity concentrations of 226Ra, 238U, 232Th and 40K in fertilizer factories were: 74.54 ± 3.7, 26.54 ± 1.3, 14.68 ± 0.73 and 233 ± 11.68 Bq kg−1, respectively, in Ceramic factories were: 75.91 ± 3.7, 31.35 ± 1.56, 20.34 ± 1.01 and 255 ± 12.76 Bq kg−1, respectively, in textile factories were: 121 ± 6.07, 36.22 ± 1.81, 25.80 ± 1.29 and 1076 ± 53.83 Bq kg−1, respectively, in oil factories were: 76.24 ± 3.81, 25.90 ± 1.29, 15.26 ± 0.7 and 266 ± 13.31 Bq kg−1, respectively, and in steel factory were: 79.72 ± 3.98, 35.22 ± 1.76, 11.95 ± 0.59 and 163 ± 8.16 Bq kg−1, respectively. The calculated absorbed dose rates in factories were: 31.13 ± 1.55, 37.86 ± 1.89, 79.04 ± 3.95, 32.64 ± 1.63 and 29.99 ± 1.49 nGy h−1, respectively. Also, the annual effective dose in the above factories were: 0.03 ± 0.001, 0.04 ± 0.002, 0.09 ± 0.004, 0.03 ± 0.001 and 0.036 ± 0.001 mSv y−1, respectively. Also, the exposure of workers to radon was studied using solid state nuclear track detectors (CR-39). The results indicate that feeding materials variably affect the radioactivity measurements of the surface soil in different factories.

2016 ◽  
Vol 31 (2) ◽  
pp. 165-172 ◽  
Author(s):  
Shaaban Harb ◽  
Noor Ahmed ◽  
Wael Badawy ◽  
Nagwa Saad

The activity concentrations of natural radionuclides (226Ra, 232Th, and 40K) for a set of 31 agricultural soil samples from the Nile River banks in the area of El-Sebaiya city, Aswan Governorate, Egypt were measured by gamma-spectrometry. The study revealed that the average activity concentrations of natural radionuclides 226Ra, 232Th, and 40K were 23.2 ? 2.8Bq/kg, 21.1 ? 2.8 Bq/kg, and 218.6 ? 3.7 Bq/kg, respectively. The obtained results of the activity concentrations are within the range of values reported for neighbouring areas in Egypt. The values obtained for the hazard indices and the representative level index in all sampling sites were lower than unity, showing that there is no significant risk arising from the exposure to the soil in the studied area. The absorbed dose rate and annual effective dose in air outdoors and indoors were calculated from 226Ra, 232Th, and 40K in soil, the average values being 32.64 nGy/h, 40.06 ?Sv, and 160.25 ?Sv, respectively. The absorbed dose rate at the eastof El-Sebaiya city is higher than that obtained for the west because of higher concentrations of tri-calcium phosphate in the soil. The studied area is not significantly affected by the industrial activities, except for a few isolated spots.


Author(s):  
Koya Ogura ◽  
Masahiro Hosoda ◽  
Yuki Tamakuma ◽  
Takahito Suzuki ◽  
Ryohei Yamada ◽  
...  

Ten years have elapsed since the accident at the Fukushima Daiichi Nuclear Power Plant in 2011, and the relative contribution of natural radiation is increasing in Fukushima Prefecture due to the reduced dose of artificial radiation. In order to accurately determine the effective dose of exposure to artificial radiation, it is necessary to evaluate the effective dose of natural as well as artificial components. In this study, we measured the gamma-ray pulse-height distribution over the accessible area of Namie Town, Fukushima Prefecture, and evaluated the annual effective dose of external exposure by distinguishing between natural and artificial radionuclides. The estimated median (range) of absorbed dose rates in air from artificial radionuclides as of 1 April 2020, is 133 (67–511) nGy h−1 in the evacuation order cancellation zone, and 1306 (892–2081) nGy h−1 in the difficult-to-return zone. The median annual effective doses of external exposures from natural and artificial radionuclides were found to be 0.19 and 0.40 mSv in the evacuation order cancellation zone, and 0.25 and 3.9 mSv in the difficult-to-return zone. The latest annual effective dose of external exposure discriminated into natural and artificial radionuclides is expected to be utilized for radiation risk communication.


Author(s):  
Anas M Ababneh ◽  
Qutad M Samarah

Abstract It is inevitable that we are exposed to radiation daily from various sources and products that we consume on daily basis. The use of toothpaste for oral hygiene is one of the most common daily practices by humans and yet very little data are available regarding its radiation content. In this work, we investigated the concentrations of gamma emitting radionuclides in toothpaste samples consumed in Jordan. 40K and 226Ra were detected in almost one-third of the samples, whereas 228Ra was detected in nearly half of them. The corresponding activity concentrations in the detected samples were in the ranges of 68.7–154.2, 4.6–14.1 and 1.3–10.0 Bq/kg, respectively. Dose assessment of accidental ingestion of toothpaste for children and adults was made, and its contribution to the annual effective dose was found to be very minimal with maximum doses of ~2.9 and 1.3 μSv for children and adults, respectively.


2020 ◽  
Vol 15 (1) ◽  
pp. 107-118
Author(s):  
Daniel Hatungimana ◽  
Caner Taşköprü ◽  
Mutlu İçhedef ◽  
Müslim Murat Saç ◽  
Şemsi Yazıcı ◽  
...  

ABSTRACT The aim of this study is to determine the radon and natural radioactivity concentrations of some building materials and to assess the radiation hazard associated with those mortar materials when they are used in the construction of dwellings. Radon measurements were realized by using LR-115 Type 2 solid state nuclear track detectors. Radon activity concentrations of these materials were found to vary between 130.00 ± 11.40 and 1604.06 ± 40.5 Bq m−3. The natural radioactivity in selected mortar materials was analyzed by using scintillation gamma spectroscopy. The activity concentrations for 226Ra, 232Th and 40K for the studied mortar materials ranged from ND to 48.5 ± 7.0 Bq kg−1, ND to 41.0 ± 6.4 Bq kg−1 and ND to 720.4 ± 26.8 Bq kg−1, respectively. Radium equivalent activities, external and internal hazard indexes, gamma and alpha indexes and absorbed gamma dose rates were calculated to assess the radiation hazard of the natural radioactivity in studied samples. The calculated Raeq values of all samples were found to be lower than the limit of 370 Bq kg−1 set for building materials. The estimated hazard index values were found to be under the unity and the absorbed dose rate values were also below the worldwide average of 84 nGy h−1.


Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 3012
Author(s):  
Se Kye Park ◽  
Dong Yun Choi ◽  
Duyoung Choi ◽  
Dong Yun Lee ◽  
Seung Hwa Yoo

In this study, a high-density polyethylene (HDPE)-based carbon fiber-reinforced thermoplastic (CFRTP) was irradiated by an electron-beam. To assess the absorbed dose rate influence on its mechanical properties, the beam energy and absorbed dose were fixed, while the absorbed dose rates were varied. The tensile strength (TS) and Young’s modulus (YM) were evaluated. The irradiated CFRTP TS increased at absorbed dose rates of up to 6.8 kGy/s and decreased at higher rates. YM showed no meaningful differences. For CFRTPs constituents, the carbon fiber (CF) TS gradually increased, while the HDPE TS decreased slightly as the absorbed dose rates increased. The OH intermolecular bond was strongly developed in irradiated CFRTP at low absorbed dose rates and gradually declined when increasing those rates. X-ray photoelectron spectroscopy analysis revealed that the oxygen content of irradiated CFRTPs decreased with increasing absorbed dose rate due to the shorter irradiation time at higher dose rates. In conclusion, from the TS viewpoint, opposite effects occurred when increasing the absorbed dose rate: a favorable increase in CF TS and adverse decline of attractive hydrogen bonding interactions between HDPE and CF for CFRTPs TS. Therefore, the irradiated CFRTP TS was maximized at an optimum absorbed dose rate of 6.8 kGy/s.


1980 ◽  
Vol 175 (1) ◽  
pp. 17-18 ◽  
Author(s):  
William L. McLaughlin ◽  
Arne Miller ◽  
Stuart C. Ellis ◽  
Arthur C. Lucas ◽  
Barbara M. Kapsar

2014 ◽  
Vol 12 (7) ◽  
pp. 774-781 ◽  
Author(s):  
Ioan Călinescu ◽  
Diana Martin ◽  
Daniel Ighigeanu ◽  
Adina Gavrila ◽  
Adrian Trifan ◽  
...  

AbstractElectron beam (EB) irradiation is a useful method to generate stable silver nanoparticles without the interference of inherent impurities generated from chemical reactions. Our experiments were carried out using linear electron beam accelerators with two different EB absorbed dose rates: 2 kGy min−1 and 7–8 kGy s−1, and with different absorbed dose levels. The optimum conditions for silver nanoparticles (AgNPs) generation by radiolysis, or by radiolysis combined with chemical reduction, were established. In order to obtain a good yield for AgNPs synthesized by radiolysis, a high dose rate is required, resulting in a rapid production process. At low absorbed dose rates, the utilization of a stabilization agent is advisable. By modifying the experimental conditions, the ratio between the chemical and radiolytic reduction process can be adjusted, thus it is possible to obtain nanoparticles with tailored characteristics, depending on the desired application.


2012 ◽  
Vol 293 (2) ◽  
pp. 649-654 ◽  
Author(s):  
K. S. Babai ◽  
S. Poongothai ◽  
K. S. Lakshmi ◽  
J. Punniyakotti ◽  
V. Meenakshisundaram

Sign in / Sign up

Export Citation Format

Share Document